3. When your body fills with extra electrons and you touch a good conductor, you get a shock. Is this
shock an example of static electricity or an electrical current? Explain your answer. (Hint: Review
the definitions of static and current.)

The order of net coulombic measurement of the amount is (4) > (3) > (1) > (2) .

The Many Kinds of Electric Forces Electromagnetic forces can be divided into two categories: attractive electromagnetic forces and repellent electrical forces. Related crimes repel each other whereas opposite charges attract one another.

(1)   Net charge density force on charge q: magnitude  = kQq / R2  +  2 kQq cos(theta) / R2

                                                                   = k Q q ( 1 + 2 cos(theta) ) / R2

(2)   Net charge density force on charge q: magnitude = kQq / R2  +  2 kQq cos(theta) / (R/cos(theta))^2

                                                                = k Q q ( 1 + 2 cos3(theta) ) / R2

(3) Net charge density force on charge q: magnitude =  3 kQq / R2

(4)Net charge density force on charge q: magnitude=  kQq / (R/2)^2  = 4 kQq / R2

To know more about electric force visit:

https://brainly.com/question/2526815

#SPJ1

Soft sand makes it challenging to ride a bicycle since the tires can't generate enough friction. The bicycle struggles to move ahead as a result, and its tires sink.

Riding a bicycle on soft sand poses a risk of the vehicle being stuck and challenging to move. Injuries might result if the rider loses balance and falls off the bicycle. The frame, tires, and other parts of the bicycle could also be harmed by the sand.

Furthermore, sand, dirt, wood chips, deep pea gravel, soft grass, and snow all drastically alter your speed. Sand, however, can be the most challenging of all of them because you typically enter the area quickly from grass or another hard surface.

Learn more about bicycle here:

https://brainly.com/question/30683734

#SPJ1

The bag of potato chips inflates due to the increase in temperature inside the car. As the temperature rises, the air molecules inside the bag gain energy and begin to move around faster, increasing the pressure inside the bag. Since the bag is airtight, the pressure cannot escape, causing the bag to expand.

What is Charles’ Law?

Charles' Law is a gas law that describes the relationship between the volume and temperature of a gas, assuming that the pressure and amount of gas remain constant. It states that the volume of a fixed amount of gas at a constant pressure is directly proportional to its absolute temperature.

The potato chip bag expands as a result of the car's increased temperature. The air molecules inside the bag gather energy as the temperature rises and start to travel more quickly, which raises the pressure inside the bag. The bag expands because the pressure within cannot leave because it is airtight.

Charles' Law, which states that the volume of a gas is precisely proportional to its absolute temperature for a set amount of gas at a constant pressure, can be used to explain this phenomena. If the pressure is constant, the volume of the gas increases along with the temperature.

Since the air inside a bag of potato chips behaves like a gas, when the temperature rises, the volume of air inside the bag also expands, increasing the pressure inside the bag and causing it to inflate.

Learn more about Charles' Law click here:

https://brainly.com/question/16927784

#SPJ1

Cardiovascular fitness and flexibility are both important factors in maintaining a healthy lifestyle because they contribute to overall physical health and well-being.

Cardiovascular fitness refers to the ability of the heart, lungs, and circulatory system to deliver oxygen-rich blood to the body's tissues during physical activity. Regular cardiovascular exercise, such as running, swimming, or cycling, can improve heart health, lower blood pressure, reduce the risk of heart disease, and improve overall fitness and endurance.

In combination, cardiovascular fitness and flexibility can provide a foundation for good physical health, allowing individuals to engage in a wide range of physical activities and enjoy an active lifestyle. Regular exercise that includes both cardiovascular fitness and flexibility can also help improve mental health and reduce the risk of chronic diseases, such as obesity, type 2 diabetes, and some forms of cancer. Overall, maintaining good cardiovascular fitness and flexibility is an important part of a healthy lifestyle.

Learn more about cardiovascular fitness :https://brainly.com/question/28044292

#SPJ1

Answer:

Through the water cycle, heat is exchanged and temperatures fluctuate. As water evaporates, for example, it absorbs energy and cools the local environment. As water condenses, it releases energy and warms the local environment. The water cycle also influences the physical geography of the Earth.

The atomic number of the atoms is 3

The mass number of the atom is 6.

The atomic number of an atom is the number of protons in the nucleus of the atom. In a neutral atom, the atomic number also corresponds to the number of electrons orbiting around the nucleus.

The atomic number determines the identity of the element, since each element has a unique number of protons in its nucleus.

The atomic number is typically represented by the symbol Z in chemical equations and atomic models.

Learn more about atomic number:https://brainly.com/question/16858932

#SPJ1

The power output is given 2000 watt and voltage is 240 v. Then the current through the heating element is 8.3 A and the resistance is 29 ohms.

The power used by an object is the rate of its work done or energy. It is the energy divided by time. The power output in a circuit is the product of the potential difference V and current I.

P = I V

Given,

P = 2 kw = 2000 W

v = 240 V.

Then I = P/v

I = 2000 w/240 v = 8.3 A.

According to Ohm's law, voltage v is the product of the current and resistance through the material.

hence,

V = I R

then, R = V/I

R = 240 V/8.33 A

  = 29 Ω.

Therefore, the current and resistance through the heating element are 8.3 A and 29 ohms respectively.

Find more on power;

https://brainly.com/question/24110214

#SPJ9

308.6 m the maximum height reached.

Define velocity

The main determinant of an object's location and rate of motion is its velocity. It can be explained as the distance an object travels in one measure of time. The displacement of the item in a given amount of time is referred to as velocity.

The distance a person travels in a predetermined amount of time is referred to as speed.

Vi is the starting speed.

Vf is final speed

A=acceleration and Y=displacement

When the bag is freed, its Vi equals that of a balloon traveling at 13 m/s upward.

At the moment of release, choose up as positive y=0.

Vf=0 when it is maximum. Using the equation 2Vf=2Vi+2ay,

0=(13m/s)2+2(9.81m/s2)y, and y=8.6m

300 + 8.6 = 308.6 m is the highest point.

To learn more about velocity use:

https://brainly.com/question/80295?source=archive

#SPJ1

A 4 kilogram lawn chair that is blown into a fence by the wind experiences an 8 N reaction force from the fence.

Physics defines force as: The pushing or pulling of a massed object affects its velocity. An agent with the ability to change a body's resting and moving condition is known as an external force. It has a size and a movement.

Force: Force is indeed a physical factor that alters or has the potential to alter an object's state of rest and motion as well as its shape. Newton is the SI unit of force.

To know more about force visit:

https://brainly.com/question/13191643

#SPJ1

Answer:

To solve this problem, we will use the equation for the net force on an object, which is:

net force = mass x acceleration

We can rearrange this equation to solve for acceleration:

acceleration = net force / mass

Once we have the acceleration, we can use the equation for the motion of an object under constant acceleration:

final velocity^2 = initial velocity^2 + 2 x acceleration x distance

We can rearrange this equation to solve for the distance required to stop the car:

distance = initial velocity^2 / (2 x acceleration)

Finally, we can use the equation for average velocity to calculate the time required to travel this distance:

time = distance / average velocity

Substituting the given values into the equations:

net force = 6000 N

mass = 1200 kg

initial velocity = 10 m/s

Using the first equation:

acceleration = net force / mass

acceleration = 6000 N / 1200 kg

acceleration = 5 m/s^2

Using the second equation:

distance = initial velocity^2 / (2 x acceleration)

distance = 10 m/s^2 / (2 x 5 m/s^2)

distance = 10 m

Using the third equation:

average velocity = (initial velocity + final velocity) / 2

final velocity = 0 (since the car is coming to a stop)

average velocity = 10 m/s / 2

average velocity = 5 m/s

Using the fourth equation:

time = distance / average velocity

time = 10 m / 5 m/s

time = 2 seconds

Therefore, the time required for a 6000-newton net force to stop a 1200-kilogram car initially traveling at 10 meters per second is 2 seconds.

To calculate the total work done on the block by all forces as it moves a distance "l" up the incline, we need to consider the work done by each force separately.

Assuming that the block is moving up the incline with a constant velocity, the net force on the block is zero. Therefore, the work done by the net force on the block is also zero.

However, there are two forces acting on the block: the force of gravity (Fg) and the force of friction (Ff). Since the block is moving up the incline, the direction of the frictional force is opposite to the direction of the displacement of the block, so the work done by the force of friction is negative.

The work done by the force of gravity is given by:

Wg = Fg * d

where Fg is the force of gravity acting on the block and d is the distance moved by the block in the direction of the force of gravity. Since the block is moving up the incline, the distance moved by the block in the direction of the force of gravity is l sinθ, where θ is the angle of inclination of the incline.

The work done by the force of friction is given by:

Wf = Ff * d

where Ff is the force of friction acting on the block and d is the distance moved by the block in the direction of the force of friction. Since the block is moving up the incline, the distance moved by the block in the direction of the force of friction is also l sinθ.

Since the force of friction is opposing the motion of the block, the work done by it is negative:

Wf = -μk * N * l sinθ

where μk is the coefficient of kinetic friction, N is the normal force exerted on the block by the incline and l sinθ is the distance moved by the block in the direction of the force of friction.

Therefore, the total work done on the block by all forces as it moves a distance "l" up the incline is:

Wtot = Wg + Wf

= Fg * l sinθ - μk * N * l sinθ

= (m * g * sinθ) * l sinθ - μk * (m * g * cosθ) * l sinθ

= (m * g * sinθ - μk * m * g * cosθ) * l sinθ

where m is the mass of the block, g is the acceleration due to gravity.

So, the total work done on the block by all forces as it moves a distance "l" up the incline is (m * g * sinθ - μk * m * g * cosθ) * l sinθ.

Learn more about total work  done from

https://brainly.com/question/29759342

#SPJ1

The efficiency of the pump defines its capacity to pump water upto a certain height under applied rated power. The formula for the efficiency of the pump can be given by,

η=power required/rated power

Answer and

0.654

Time taken to incident light perpendicular to glass to pass through this 9.1 cm thick sandwich is 0.399 ns.

Being aware of

Layer thickness / light speed equals the amount of time required.

Also,

V is equal to the product of the sound speed and the refractive index.

Now

T1 = 0.05*1.46/3*10^8 = 2.43*10^-10 s

t2 = 0.01*1.5/3*10^8 = 5*10^-11 s

t3 = 0.02*1.59/3*10^8 = 1.06*10^-10 s

So,

Total time is equal to 2.43*10-10, 5*10-11, and 1.06*10-10 s, or 0.399*10-9 s.

= 0.399 ns

When a light beam passes through a certain media, its speed in that medium may be determined using the light speed in vacuum and the medium's refractive index. With the use of the medium's light speed, the value of the amount of time needed to travel a particular distance can be determined.

For more information on light speed kindly visit to

https://brainly.com/question/29216893

#SPJ1

Answer & Explanation:

We can use the following equation to solve the problem:

a = -μk*g

where a is the acceleration, μk is the coefficient of kinetic friction, and g is the acceleration due to gravity (9.8 m/s2).

We are given that a = -9.5 m/s2. We can assume that g is constant and equal to 9.8 m/s2. Therefore, we can rearrange the equation to solve for μk:

μk = -a/g

μk = -(-9.5 m/s2) / 9.8 m/s2

μk = 0.969

Therefore, the coefficient of kinetic friction between the bicycle’s rubber tires and the wet concrete is 0.969.

The total equivalent resistance for the circuit is 35.89 Ω

First, we shall determine the equivalence resistance between 30 Ω and 40 Ω. Details below:

R = (R₁ × R₂) / (R₁ + R₂)

R = (30 × 40) / (30 + 40)

R = 17.14 Ω

Next, we shall determine the equivalence resistance between 20 Ω and 10 Ω. Details below:

R = R₁ + R₂

R = 20 + 10

R = 30 Ω

Next, we shall determine the equivalence resistance between 50 Ω and the equivalence of 20 Ω and 10 Ω (i.e 30 Ω). Details below:

R = (R₁ × R₂) / (R₁ + R₂)

R = (50 × 30) / (50 + 30)

R = 18.75 Ω

Finally, we shall determine the total equivalent resistance for the circuit. Details below:

Total equivalent resistance = 17.14 + 18.75

Total equivalent resistance = 35.89 Ω

Learn more about resistance:

https://brainly.com/question/13691672

#SPJ1

The horizontal displacement is given by the product of the horizontal component of the initial velocity and the time of flight, so it is 6 m/s x 0.828 s = 4.968 m.

Initial velocity is the speed of an object at the start of its motion. It is usually represented by the letter u in equations. Initial velocity is important in determining the final velocity, displacement, and acceleration of an object after a certain amount of time.

The horizontal displacement is simply the product of the horizontal component of the initial velocity, 6 m/s, and the time the ball is in the air. To determine the time the ball stays in the air, we can use the formula for the time of flight of an object under the influence of gravity:
t = 2v sin θ / g
Where t is the time of flight, v is the initial velocity, θ is the angle of the initial velocity vector with respect to the horizontal, and g is the acceleration due to gravity (9.8 m/s2).
In this case, the initial velocity vector is (6.0 m/s) x + (20.0 m/s) y, so the angle is given by the inverse tangent of the ratio of the y-component to the x-component, which is inverse tangent (20.0/6.0) = 77.4°.
Substituting the values into the equation, we get:
t = 2 (6.0 m/s) sin 77.4° / 9.8 m/s2 = 0.828 s
The horizontal displacement is given by the product of the horizontal component of the initial velocity and the time of flight, so it is 6 m/s x 0.828 s = 4.968 m.

To learn more about initial velocity
https://brainly.com/question/28996913
#SPJ1

Answer:

V = distance / time = S / t

t = S / V = 400 m / 22 m/s = 18.2 sec

The vertical force is given as 735.75 N

Given that there is no friction existing between the wall and the ladder, we would have

w - n = 0

w is the weight of thios ladder

while N is the vertical force that acts on it

n = w

the formula for n = mg

this is mass of ladder * the gravitational constant

= 75.0 kg ladder * 9.81

= 735.75 N

written as substituting the weight of the ladder, W = 75.0 kg * 9.81 m/s^2 = 735.75 N

Therefore the vertical force is givem as 735.75 N

Read more on vertical force herehttps://brainly.com/question/14101425

#SPJ1

To produce a force of 12 kN in the press, a tangential turning force of 1187500 N (1187.5 kN) must be applied to the wheel.

Force is an influence that causes a change in the motion, shape, or both of an object. It is the result of an interaction between two objects, and is described through Newton's three laws of motion. These laws explain the relationship between force, mass, and acceleration.

The pitch of the screw is the distance between two adjacent threads on the screw, and is 0.20 cm in this case. The wheel diameter is 55 cm.

To calculate the force needed to produce a force of 12 kN in the press, we use the following equation: F = (12000 N * 55 cm) / (0.20 cm * 0.4).

This equation takes into account the pitch of the screw, the wheel diameter, and the efficiency of the press.

Plugging in the numbers, we get: F = (12000 N * 55 cm) / (0.20 cm * 0.4) = 1187500 N.

To learn more about force

https://brainly.com/question/12785175

#SPJ9

The object with the least kinetic energy, given the above instances is water with a mass of 12 Kg falling at 10 m/s (option B)

To know the object which has the least kinetic energy, we shall determine the kinetic energy of each objects. This is illustrated below:

For sand (Option A):

KE = ½mv²

KE = ½ × 120 × 12²

KE = 8640 J

For water (Option B):

KE = ½mv²

KE = ½ × 12 × 10²

KE = 60 J

For sand (Option C):

KE = ½mv²

KE = ½ × 12 × 8²

KE = 384 J

For water (Option D):

KE = ½mv²

KE = ½ × 120 × 12²

KE = 8640 J

From the above calculations, it is evident that the water with a mass of 12 Kg falling at 10 m/s has the least kinetic energy. Thus, the correct answer is option B

Learn more about kinetic energy:

https://brainly.com/question/25959744

#SPJ1

Answer:

7.75 m/s.

Explanation:

We can use the work-energy principle to solve this problem. The principle states that the work done on an object is equal to the change in its kinetic energy:

W = ΔK

where W is the work done, ΔK is the change in kinetic energy.

In this case, the work done on the ball is 45.0 J. Since the ball is initially at rest, its initial kinetic energy is zero. Therefore, the change in kinetic energy is:

ΔK = Kf - Ki = 1/2 mv^2 - 0

where Kf is the final kinetic energy, Ki is the initial kinetic energy, m is the mass of the ball, and v is its velocity.

Substituting the given values, we get:

45.0 J = 1/2 (1.50 kg) v^2

Solving for v, we get:

v^2 = (2 x 45.0 J) / (1.50 kg)

v^2 = 60.0

v = √60.0

v ≈ 7.75 m/s

Therefore, the velocity of the ball is approximately 7.75 m/s.

No, she is not correct. The density of the larger rock may be different than the density of her piece, depending on the composition of the rock and how it was formed.

Density is the measure of the mass of a substance per unit of volume. It is a physical property of a substance that can be used to identify the material. Density is calculated by dividing the mass of an object by its volume. Density is an intensive property, meaning it is independent of the size of the sample. The SI unit of density is kilograms per meter cubed (kg/m^3). Different materials have different densities, which can be compared to each other. For example, the density of water is 1 g/cm^3, while the density of lead is 11.3 g/cm^3. Density is an important physical property that is used in many scientific fields, such as physics and chemistry.

To learn more about  density

https://brainly.com/question/1978192

#SPJ9

When five violins play the same note with a sound pressure of 60 dB, the total intensity is 66.99 dB, as opposed to just one violin.

Holding a knife against a fruit piece will demonstrate pressure in an easy way. It won't cut any surface of the fruit if you press the flat part of a knife against it. A sizable area is affected by the force.

Absolute and gauge pressure are the two fundamental forms of pressure, and the reference pressure, which serves as a comparison between them, is what distinguishes them. Someone may find the lingo used to convey the chemical properties of a pressurized system to be a little confusing.

To know more about pressure visit:

https://brainly.com/question/12971272

#SPJ1

A spherical raindrop would fall from a height of 2.70 km at a speed of 26.22 m/s due to air resistance.

(a) Height from which the raindrop falls, h = 2.70 km = 2700 m

Now,

suppose, m = mass of raindrop

v = speed of raindrop at the ground.

Apply conservation of energy -

1/2 m v^2 = m g h

v = (2 g h)^1/2

  = (2 * 9.8 * 2700)^1/2 = 230.0 m/s (Answer)

Dynamics

m x" = m g - k x'^2

limit speed is

v = (m g / k)^1/2

where

k = 1/2 ρ A C

ρ = air density = 1.21 kg/m^3

A = area = π r^2 = 3.141 * 0.0015^2 = 7.07 x 10^-6 m^2

C = coefficient of hydraulic resistance [0.47 for a sphere]

m = ρ' V = 1.0 x 10^3 x (4/3)*pi*0.0015^3 = 1.41 x 10^-5 kg

k = 1/2*1.21*7.07x10^-6*0.47

  = 2.01 x 10^-7 kg/m

Therefore,

v = [(1.41 x 10^-5 x 9.8) / (2.01 x 10^-7)]^1/2

  = 26.22 m/s

to know more about the surface area here:

brainly.com/question/29298005

#SPJ1

The speed of the basketball is 14.4 m/s if its kinetic energy is 109 J.

Kinetic energy is the energy possessed by an object due to its motion. It is defined as the energy that an object has because of its velocity, and it depends on the mass of the object and its speed. The formula for kinetic energy is [tex]K = 1/2 mv^2,[/tex]  where K is kinetic energy, m is the mass of the object, and v is its velocity.

The greater the mass and velocity of an object, the more kinetic energy it has. Kinetic energy is a scalar quantity, meaning that it only has magnitude and no direction. It is an important concept in physics and has many practical applications, such as in sports, transportation, and industrial machinery.

The kinetic energy (K) of an object with mass m and speed v is given by:

[tex]K = 1/2 * m * v^2[/tex]

Rearranging this equation, we can solve for v:

[tex]v = sqrt(2K/m)[/tex]

Plugging in the values given in the problem, we get:

[tex]v = sqrt(2*109 J / 0.145 kg) = 14.4 m/s[/tex]

Therefore, the speed of the basketball is 14.4 m/s if its kinetic energy is 109 J.

Learn more about kinetic energy, here:

https://brainly.com/question/26472013

#SPJ1

the time is takes for the coin to hit the bottom of the well. t to obtain 6.87 seconds.

Time is a continuous series of events that happen one after another, starting in the past and continuing into the present and the future, according to the definition of time in mathematics. The length of an event, the time between them, or even the sequence of occurrences can all be quantified, measured, or compared using the concept of time.

Time, according to physicists, is the flow of past occurrences into the present and the future. A system is essentially timeless if it is unchanging. The fifth dimension of reality, time, can be thought of as the means by which three-dimensional space events are described.

To know more about time visit:

https://brainly.com/question/19979064

#SPJ1

The farther apart the two objects are, the weaker gravitational force they have. Conversely, the closer the objects are, the stronger the gravitational force between them.

What is gravitational force?

To know more about gravitational force, click the link given below:

https://brainly.com/question/12528243

#SPJ1

The acceleration of the lawn mower is  1.25 m/s².

The velocity of the lawn mower at the given time is 6.25 m/s.

The acceleration of the lawn mower is calculated by applying Newton's second law of motion as shown below.

Fx = ma

where;

F cosθ = ma

where;

a = ( F cosθ ) / m

a = ( 50 N  x  cos60 ) / 20 kg

a = 1.25 m/s²

The velocity of the lawn mower at the given time is calculated as;

v = at

v = 1.25 m/s²  x 5 s

v = 6.25 m/s

Learn more about acceleration here: https://brainly.com/question/14344386

#SPJ1

Answer: When a cube is divided into smaller cubes of equal size, the length, height, and width of each new cube are one-third of the original cube.

So each new cube will have a length, height, and width of 4/3 cm.

To calculate the surface area of each new cube, we need to find the area of each face and then add them up. Each cube has six faces, so we can calculate the surface area of one cube by multiplying the area of one face by six.

The area of one face of the new cube is (4/3)*(4/3) = 16/9 cm².

So the surface area of one new cube is 6*(16/9) = 96/9 cm² = 10.67 cm² (rounded to two decimal places).

Since we have 8 new cubes, the total surface area is 8 times the surface area of one new cube:

Total surface area = 8 * 10.67 cm² = 85.33 cm² (rounded to two decimal places).

Therefore, the surface area of the 8 new cubes is 85.33 cm².

11.76m is the maximum height achieved by a track star who goes into a long jump at 12m/s at an angle of 20.0 about the horizontal

Define projectile motion.

An object or particle that is projected into a gravitational field, such as from the surface of the Earth, and moves along a curved route only under the influence of gravity is said to be experiencing projectile motion.

Most calculations make the assumption that the effects of air resistance are passive and insignificant in the specific instance of Earth projectile motion. Galileo demonstrated that the curved path of objects in projectile motion is a parabola; however, in the unique situation where an object is hurled directly upwards, it may also be a straight line. Such a trajectory is a ballistic trajectory, which is the study of such movements.

v = u + at

a = g = 9.8m/s2

v = 0

u = 12 sin 20

t = 12 sin 20 /9.8 = 0.42 s

s = ut +1/2 at2

s = 12sin20 + 1/2 *9.8*0.42*0.42

s = 10.9 +.864 = 11.76m

To learn more about projectile motion use:

https://brainly.com/question/1912408

#SPJ1