3-Calculate the total electric current of this circuit:
( ) 10.2 A
( ) 3.45 A
( ) 5.5 A
( ) 7.5 A

Answer:

Explanation:

Yes, an object can travel with a non-zero velocity even when the net external force on it is zero. The object in this case is moving to the right with constant velocity and will continue in its state of motion as long as there are no external unbalanced forces acting on it.  This is Newton's First Law of Motion (aka the Law of Inertia).

The mass to be hung at a point 40cm to the right of the pivot point such that the stick hangs level is 15 g.

To solve this problem, use the principle of moments which states that the sum of the clockwise moments about a pivot point is equal to the sum of the counterclockwise moments about the same pivot point. In this case, take the pivot point to be the suspension point of the meter stick.

Let x be the mass that needs to hang at a point 40cm to the right of the pivot point. Then, set up the following equation:

(clockwise moment) = (counterclockwise moment)

(0.2 kg) × (0.3 m) × (9.81 m/s²) = (x kg) × (0.4 m) × (9.81 m/s²) + (0.1 kg) × (0.1 m) × (9.81 m/s²)

Simplifying this equation:

0.05886 = 3.924x

x = 0.015 kg or 15 g

Therefore, we need to hang a 15 g mass at a point 40 cm to the right of the pivot point such that the stick hangs level.

Find out more on pivot here: https://brainly.com/question/29526863

#SPJ1

Gravity is the force responsible for the orbit of satellites. Gravity is an attractive force that acts between two objects with mass.

Satellites are man-made objects that are sent into space to orbit around a planet or other celestial body. They are used for a variety of purposes, including communication, navigation, scientific research, weather forecasting, and more. Satellites are equipped with advanced technology that allow them to transmit signals and data back to Earth, helping to make our lives easier in many ways. They are powered by solar panels and come in a variety of shapes and sizes. They can be stationary, meaning they stay in the same position as they orbit, or they can be geostationary, meaning they stay in the same point relative to the Earth's surface. They are also capable of providing real-time data and images to Earth-based observers. By using satellite technology, we can gain a better understanding of our planet, its climate, and its inhabitants.

This force is what causes satellites to orbit around a planet or star, as the gravitational pull of the planet or star causes them to move in a curved path.

To learn more about satellites
https://brainly.com/question/28103637
#SPJ1

The elongation of the rod beyond its original length would be 2.5 mm.

To elongation of the rod can be deduced using the formula:

ΔL = FL / AE

where:

The cross-sectional area of the steel rod is given by:

The force applied to the rod:

Thus:

ΔL = (98.1 x 2) / ((7.85 x [tex]10^{-7[/tex]) x (200 x [tex]10^9[/tex] ))

ΔL = 0.0025 m = 2.5 mm

In other words, the elongation of the steel rod beyond its original length is 2.5 mm.

More on Young modulus can be found here: https://brainly.com/question/14070556

#SPJ1

Answer:

The light spectrum measured for a nearby star can be used as a benchmark for more distant stars because two stars with identical spectra have the same intrinsic luminosity. Spectroscopy can be applied to light from a distant galaxy, but the dark lines in the solar spectrum give a unique pattern that can be used to identify the elements present in the star. The light spectrum of a distant galaxy that is moving rapidly away from the observer will be shifted towards the red end of the spectrum due to the Doppler effect, which causes the wavelengths of light to stretch out as the object moves away from the observer.

The final velocity of the motorcycle is

the total distance traveled during the 15-second timeframe is

Convert the initial velocity from mph to m/s:

75 mph = 75 x 0.44704 m/s = 33.528 m/s

Using vf = vi + at

where

vf is the final velocity,

vi is the initial velocity

a is the acceleration, and

t is the time interval.

Plugging in the given values, we get:

vf = 33.528 m/s - (0.25 m/s^2)(15 s) = 32.59 m/s

convert the final velocity back to mph

32.59 m/s = 32.59 x 2.237 mph/m = 72.9 mph

distance traveled, d

d = vi*t + (1/2)at^2

d = 32.59 m/s * 15 s + (1/2)(-0.25 m/s^2)(15 s)^2

d = 516.98 m

Learn more about final velocity at

https://brainly.com/question/25905661

#SPJ1

Answer:

The answer is 13.5g/cm³

Explanation:

m1=20g

m3=70g

m2=695g

v=20cm³

m2-m1/m3-m1

R.d=695-20/70-20

R.d=675/50

R.d=13.5

R.d=density of liquid/density of water

density of liquid =R.d×density of water

D=13.5×1

D=13.5g/cm³

(a) The S-P difference (sec) is 40 sec.

(b) The amplitude (mm) is 10 mm

(c) The distance (km) is 380 km

(d) The magnitude (M) is 4.5

What is the S-P wave difference (sec)?

The S-P wave difference (sec) is a measure used in seismology to determine the distance between a seismic station and an earthquake source.

From the graph, the S-P difference, that is between S and P = 40 s - 0 s

= 40 s

The distance (km) corresponding to 40 sec is 380 km.

The amplitude of the wave is the maximum displacement of the wave and it is equal to 10 mm.

The corresponding magnitude of the wave is 4.5.

Learn more about S-P wave difference here: https://brainly.com/question/15225142

#SPJ1

To solve this problem, we can use the conservation of momentum and the conservation of kinetic energy.First, let's find the velocity of the 0.530-kg cart after the collision. We can use the conservation of momentum:m1v1 + m2v2 = m1v1' + m2v2'where m1 and v1 are the mass and velocity of the 0.530-kg cart before the collision, m2 and v2 are the mass and velocity of the 0.25-kg cart before the collision, and v1' and v2' are the velocities of the carts after the collision.Plugging in the numbers, we get:(0.530 kg)(0.572 m/s) + (0.25 kg)(0 m/s) = (0.530 kg)v1' + (0.25 kg)v2'Solving for v1', we get:v1' = [(0.530 kg)(0.572 m/s) + (0.25 kg)(0 m/s)] / (0.530 kg + 0.25 kg) = 0.378 m/s to the rightSo the 0.530-kg cart moves off to the right at 0.378 m/s after the collision.Next, let's find the maximum compression of the spring. We can use the conservation of kinetic energy:(1/2)m2v2^2 = (1/2)kx^2where k is the spring constant and x is the maximum compression of the spring.We know the mass and velocity of the 0.25-kg cart before the collision (v2 = 0 m/s), so we can solve for k:k = 2(1/2)m2v2^2 / x^2 = m2v2^2 / x^2Plugging in the numbers, we get:k = (0.25 kg)(0 m/s)^2 / x^2 = 0This means that the spring constant is 0, which is not physically possible. Therefore, there must be an error in the problem statement or some missing information that would allow us to calculate the maximum compression of the spring.

Engineers use electrical insulators to prevent electricity from flowing to the wrong place.

Insulators are materials that do not conduct electricity easily and are used to separate electrical conductors to prevent current leakage or short circuits. Common insulating materials include rubber, plastic, glass, and ceramic. By using insulators, engineers can ensure that electrical energy is directed along the intended path and that electrical equipment operates safely and efficiently.

. Insulators are commonly used in a variety of applications, including electrical wiring, power transmission and distribution systems, electronic devices, and high-voltage equipment. Common insulating materials include rubber, plastic, glass, ceramic, and air. The choice of insulating material depends on various factors such as the required level of insulation, the operating temperature, and the environment in which the insulator will be used.

Learn more about insulators at:

https://brainly.com/question/11845176

#SPJ1

In the 1600s, a scientist by the name of Robert Boyle made the first known demonstration of the fact that a sound cannot pass through void space. Boyle placed the clock in a glass jar with a tight lid.

Pump out the air from the sealed bell jar while putting an electrical bell inside. Set the electric bell to ringing. We cannot hear the sound that the bell makes with our ears. This indicates that sound waves require a material environment for propagation because they cannot move through a vacuum.

Since sound waves are carried from one location to another by the molecules of solids, liquids, and gases, sound requires a physical medium for propagation, such as a solid, liquid, or gas. Since there are no molecules in the vacuum that can vibrate and convey sound waves, sound cannot travel through it.

To know more about electric visit :

https://brainly.com/question/8971780

#SPJ1

The orbital speed of the satellite orbiting around a planet of radius 34 Km is found to be 2.59 km/s.

To find the orbital speed (v) of the satellite, we can use the formula,

v = √(GM/r), gravitational constant (6.674 x 10⁻¹¹ N(m/kg)²) is G, mass of the planet is M, and orbital radius of the satellite is r. To calculate M, we can use the formula,

g = GM/r², rearranging this formula, we get,

M = gr²/G

Substituting the values, we get,

M = 3.3(34,000)²/(6.674 x 10⁻¹¹)

M = 6.06 x 10²⁰ kg

Now, substituting the values of G, M, and r into the formula for orbital speed, we get,

v = √((6.674 x 10⁻¹¹)(6.06 x 10²⁰)/(34,000))

v = 2.59 x 10³ m/s

Therefore, the satellite's orbital speed is approximately 2.59 km/s.

To know more about orbital speed, visit,

https://brainly.com/question/7260440

#SPJ1

The acceleration of the racing camel is 1.38 m/s².

From Newton's second law, force is expressed as;

F = m × a

Where is mass of object and a is the acceleration

Given that:

To determine the acceleration of the camel, pug the given values into the abovr formula and solve for a.

F = m × a

897N = 650 kg × a

Note that: Newton N is the same as kg·m/s²

Hence;

897kg·m/s² = 650 kg × a

Divide both sides by 650 kg

a = (897kg·m/s²) / (650 kg)

a = 1.38 m/s²

Therefore, the acceleration is 1.38 meters per second sqaure.

Learn more about force here: https://brainly.com/question/11737731

#SPJ1

Answer:

1.2 E10 N/C

Explanation:

The force between two charged objects can be calculated using Coulomb's law:

F = k * q1 * q2 / r^2

where F is the force, k is Coulomb's constant (k = 8.99 x 10^9 N m^2 / C^2), q1 and q2 are the charges of the two objects, and r is the distance between them.

Rearranging this equation to solve for the electric field at a point, we get:

E = F / q

where E is the electric field strength and q is the charge at that point.

Substituting the given values, we get:

E = (2.0 x 10^-9 N) / (1.62 x 10^-19 C)

E = 12345.68 N/C

Therefore, the magnitude of the electric field at this location is 1.235 x 10^4 N/C.

The ring will have the greater moment of inertia.

Acceleration of a body rolling down an inclined plane without slipping is given by,

α = gsinθ/(1 + K²/R²)

Acceleration of the ring,

α = gsinθ/(1 + R²/R²)

α = 1/2 gsinθ

Acceleration of the sphere,

α = gsinθ(1 + 5/2)

α = 2/7 gsinθ

Acceleration of the solid cylinder,

α = g sinθ(1 + 1/2)

α = 2/3 gsinθ

The ring has the highest acceleration. Therefore, the ring will reach the bottom of the slope first.

The ring will have the greater moment of inertia among the three.

To learn more about moment of inertia, click:

https://brainly.com/question/15246709

#SPJ1

Answer: energy can flow from a colder object to a warmer object

only if something does work.

Explanation: Consider the flow of water from a higher level to a lower level. There is no need to use energy to make this process occur. This type of process which does not need the application of energy to take place is said to be spontaneous. But to make water go up to the water tank, a pump must be used to make the process take place. This type of process which needs the use of energy to make it happen is said to be nonspontaneous.
 

but why not the only way to reduce an object's temperature is to

increase the entropy of the environment.?

coz the motion of particles decreases and their velocity decreases so they have less entropy at a lower temperature.

hope it helped:)

The electric field at the center of the cube is approximately 5.12 × 10⁴ N/C.

The electric field at the center of a face of the cube is approximately 4.54 × 10⁴ N/C.

The electric field at the center of the cube if one of the corner charges is removed is approximately 4.54 × 10⁴ N/C.

(a) To find the electric field at the center of the cube, we can use the principle of superposition, which states that the total electric field at a point in space is the vector sum of the electric fields due to each individual charge. Since all eight charges are identical and have the same distance to the center of the cube, the electric field due to each charge has the same magnitude and direction.

Using Coulomb's law, we can calculate the magnitude of the electric field due to one charge at the center of the cube as:

E = (kQ) / r²

where k is the Coulomb constant, Q is the charge on each point charge, and r is the distance from the charge to the center of the cube. Since the charges are at the corners of a cube with sides of length 10 cm, the distance from each charge to the center is sqrt√/2 times the length of the side, or 5√(3) cm.

Thus, the magnitude of the electric field due to one charge at the center of the cube is:

E = (kQ) / (5√(3) cm)² = 1.24 × 10⁴ N/C

Since there are eight charges, the total electric field at the center of the cube is:

E_total = 8E = 9.95 × 10⁴ N/C

(b) To find the electric field at the center of a face of the cube, we can again use the principle of superposition. Since the face of the cube is equidistant from four of the charges, the electric field due to those charges has the same magnitude and direction, while the electric field due to the other four charges cancels out.

So, the magnitude of the electric field at the center of a face of the cube is:

E_face = 4E = 4.96 × 10⁴ N/C

(c) If one of the corner charges is removed, the electric field at the center of the cube is no longer spherically symmetric. However, we can still use the principle of superposition to calculate the electric field due to the remaining seven charges. The electric field due to these charges at the center of the cube has the same magnitude as the electric field due to one charge at the center of a face of the cube.

Since the distance from the center to each of the remaining charges is √(2) times the length of the side of the cube.

Thus, the magnitude of the electric field due to the remaining charges is:

E_remaining = 7E = 3.18 × 10⁴ N/C

Therefore, the electric field at the center of the cube if one of the corner charges is removed is approximately 4.54 × 10⁴ N/C, which is the average of the electric fields at the centers of adjacent faces of the cube.

To know more about the Electric field, here

https://brainly.com/question/14530652

#SPJ1

Answer:

Sound waves cause particles to vibrate perpendicular to the direction of the wave.

Answer:

False.

Explanation:

Sonography uses high-frequency sound waves, not infrasonic waves, to create images of objects found inside other objects. These sound waves bounce off the internal structures of the body and are detected by a transducer, which converts them into images that can be visualized on a screen.

Infrasonic waves are sound waves with frequencies lower than the range of human hearing, typically below 20 Hz.

The correct statement explaining how a megaphone amplifies sound is: "A megaphone amplifies sound by focusing sound energy into one specific direction."

By increasing the acoustic impedance perceived by the vocal chords and bringing them into closer proximity to the air, the loudhailer amplifies the sound and increases the amount of sound power that is emitted.

Many people are familiar with the distinctively distorted sound of a human voice amplified by a loudhailer thanks to its use in train and bus stations and sporting venues. It produces the sound of a vintage acoustic phonograph record player when used with music.

To know more about sound visit:-

https://brainly.com/question/29707602

#SPJ1

The information about ultraviolet radiation supports or contradicts the safety of solar radiation exposure to astronauts on the international space station. They have wore suits that protects the astronaut from the UV light.

A space station is a sort of space habitat because it can sustain a human crew in orbit for a lengthy period of time. Major landing or propulsion systems are absent. An artificial satellite, also known as an orbital station or orbital space station, is a kind of orbital spaceflight. To allow other spacecraft to dock and transfer personnel and cargo, stations need to have docking ports. Depending on the programmed, a given orbiting outpost has a different role. Military launches have also taken place, although scientific launches of space stations have predominated. astronaut have wore suits that protects the astronaut from the UV light.  

To know more about Space stations :

https://brainly.com/question/13451310

#SPJ1.

The heel of shoe D applies the greatest force to the carpet because it has the largest surface area in contact with it, and thus the largest force is distributed over that larger area.

The breaking rate refers to the rate at which an object slows down due to braking or deceleration. In other words, it is the rate of change of velocity in the opposite direction of the object's motion.

Looking at the data provided, we can see that the velocity decreases from 50 m/s to 0 m/s over a period of 10 seconds, which means the object is decelerating at a constant rate. To calculate the breaking rate, we can use the formula:

breaking rate = (final velocity - initial velocity) / time taken

In this case, the breaking rate is:

breaking rate = (0 - 50) / 10 = -5 m/s^2

So, the object is decelerating at a rate of 5 m/s^2.

To compare this to the acceleration, we need to know the acceleration of the object before it starts breaking. If we assume that the object was accelerating at a constant rate of 5 m/s^2 before it started breaking, then the acceleration and breaking rates are equal in magnitude but opposite in direction. In other words, the acceleration and breaking rates are both 5 m/s^2, but the acceleration is positive while the breaking rate is negative.

It's worth noting that the breaking rate can vary depending on various factors such as the mass of the object, the friction between the object and the surface it is moving on, and the force applied to the brakes.

Learn more about acceleration here:

https://brainly.com/question/907547

#SPJ9

Answer:

To calculate the minimum total speed required for the projectile to escape the Earth's gravitational pull, we can use the equation for escape velocity:

v_escape = sqrt(2GM/R)

where G is the gravitational constant, M is the mass of the Earth, and R is the radius of the Earth.

Plugging in the given values, we get:

v_escape = sqrt(26.67e-115.98e24/6370000)

v_escape = 11186.4 m/s

This is the minimum total speed required for the projectile to escape the Earth's gravitational pull. In order to achieve this speed, the projectile would need to be launched with a velocity of 11186.4 m/s relative to the Earth.

Explanation:

Answer: She passed at 19 years old.

Explanation:

Answer:

he tripped ballanced forces ballanced forces

Answer:

a) The order in which the shapes reach the bottom of the slope will be the sphere, solid cylinder, and ring.

b) The time it takes for each shape to reach the bottom of the slope can be calculated using the following equation:

t = (2d / g)^(1/2)

Where t is the time, d is the height of the inclined plane (1m in this case), and g is the acceleration due to gravity (9.8 m/s^2).

For the sphere:

t = (2 x 1 / 9.8)^(1/2) = 0.45 seconds

For the solid cylinder:

t = (2 x 1 / 9.8)^(1/2) x (5/7) = 0.36 seconds

For the ring:

t = (2 x 1 / 9.8)^(1/2) x (2/5) = 0.28 seconds

c) The moment of inertia depends on the shape of the object and how the mass is distributed around its axis of rotation. For a solid sphere, the moment of inertia is given by I = (2/5)MR^2, for a solid cylinder it is I = (1/2)MR^2, and for a ring it is I = MR^2. Therefore, the order of increasing moment of inertia is the ring, the solid cylinder, and the sphere.

d) The linear acceleration of each shape can be calculated using the following equation:

a = gsinθ / (1 + I / MR^2)

Where a is the linear acceleration, g is the acceleration due to gravity (9.8 m/s^2), θ is the angle of the inclined plane (20° in this case), I is the moment of inertia, M is the mass, and R is the radius.

For the sphere:

a = (9.8 x sin20) / (1 + (2/5)) = 2.34 m/s^2

For the solid cylinder:

a = (9.8 x sin20) / (1 + (1/2)) = 3.29 m/s^2

For the ring:

a = (9.8 x sin20) / (1 + 1) = 4.16 m/s^2

e) The tangential (linear) velocity of each shape at the bottom of the slope can be calculated using the following equation:

v = ωR

Where v is the tangential velocity, ω is the angular velocity, and R is the radius.

The angular velocity can be calculated using the following equation:

ω = (2a / R)^(1/2)

For the sphere:

ω = (2 x 2.34 / 0.05)^(1/2) = 21.8 rad/s

v = 21.8 x 0.05 = 1.09 m/s

For the solid cylinder:

ω = (2 x 3.29 / 0.05)^(1/2) = 30.7 rad/s

v = 30.7 x 0.05 = 1.53 m/s

For the ring:

ω = (2 x 4.16 / 0.05)^(1/2) = 36.4 rad/s

v = 36.4 x 0.05 = 1.82 m/s

mark me brilliant

Answer:

c

Explanation:

Answer:

.04 kg

Explanation:

The equation for simple harmonic motion is x = A*cos(ωt), where A is the amplitude, ω is the angular frequency, and t is the time.

Comparing the given equation x = 2.0cos(50t) with the equation for simple harmonic motion, we see that A = 2.0 meters and ω = 50 radians/second.

The angular frequency is related to the spring constant and mass by the equation ω = sqrt(k/m), where sqrt denotes the square root.

Substituting the values given, we get:

50 = sqrt(100/m)

Squaring both sides and solving for m, we get:

m = 100/2500 = 0.04 kg

Answer:

B. 200 kgm/s

Explanation:

The initial momentum of the blue train can be calculated using the formula:

p = mv

where p is the momentum, m is the mass, and v is the velocity.

The mass of the blue train is 50 kg and its velocity is 4 m/s. Therefore, the initial momentum of the blue train is:

p = 50 kg x 4 m/s = 200 kgm/s

Therefore, the initial momentum of the blue train is 200 kgm/s, which is option B.

If we rank these magnets from the strongest to the weakest magnetic field the correct order is 4, 3, 2, 1.

The magnetic field and radius are related in the context of a charged particle moving in a circular path under the influence of a magnetic field. When a charged particle moves in a circular path under the influence of a magnetic field, the force on the particle is directed toward the center of the circle. In this force, the radius can be expressed as r = mv / Bq.

This equation shows that the radius of the circular path is directly proportional to the velocity of the particle, and inversely proportional to the magnetic field strength and the charge of the particle.

Learn more about magnets in https://brainly.com/question/2841288

#SPJ1