2x10x10x10x10x+4x10x10x10x+8x10x10

Answer:Tan 5pi/2 can also be expressed using the equivalent of the given angle (5pi/2) in degrees (450°).

Step-by-step explanation:

5π/2 radians is equivalent to 450 degrees.

We have,

To convert radians to degrees, we can multiply the value in radians by the conversion factor of 180 degrees/π radians.

To convert 5π/2 radians into degrees, we can use the conversion factor that states 180 degrees is equal to π radians.

Let's set up the conversion:

(5π/2 radians) × (180 degrees/π radians)

Here, the π radians in the numerator and denominator cancel out, leaving us with:

(5/2) × 180 degrees

Simplifying further, we have:

(5/2) × 180 = 900/2 = 450 degrees

Therefore,

5π/2 radians is equivalent to 450 degrees.

Learn more about unit conversion here:

https://brainly.com/question/13899873

#SPJ6

Answer:

Step-by-step explanation:

As a result, Mr. Rodriguez can produce 10 sacks, each containing two blueberries and three grapes.

So, 10 bags must be the solution.

The largest number that can split evenly into two other numbers is known as the greatest common factor in mathematics. For instance, the number 6 is the most frequent factor between 12 and 30. The greatest common denominator is another name for the greatest common component.

We must find the GCF, or greatest common factor, between 20 and 30 to calculate how many bags Mr. Rodriguez can produce. This is necessary because each bag must contain the same quantity of blueberries and grapes, requiring that they both have a similar factor of 20 or 30.

1, 2, 4, 5, 10, and 20 are the elements that make up 20.

1, 2, 3, 5, 6, 10, 15, and 30 make up the number 30.

1, 2, 5, and 10 are the common variables between 20 and 30.

Since the quantity of blueberries and grapes in each bag must be the same, we can split both 20 and 30 by the GCF of 10, which is 10.

The correct number of bags needed is 10 .

This results in:

2 blueberries are in each container of 20/10.

3 grapes per container (30/10)

To know more about GCF, visit

brainly.com/question/11444998

#SPJ1

Since there are four tellers, the capacity of the bank in customers per hour = 4 x 7.5 = 30.

Valley Bank has four tellers. It takes a teller 8 minutes to serve one customer.

The correct option is D. 30.

We are given that

Valley Bank has four tellers. It takes a teller 8 minutes to serve one customer.

To calculate the capacity of the bank in customers per hour, we need to find how many customers each teller can serve in an hour. To do this, we first need to convert the time taken to serve one customer from minutes to hours.

1 minute = 1/60 hoursSo, time taken to serve one customer

= 8 minutes

= 8/60 hours

= 2/15 hours

One teller can serve one customer in 2/15 hours.In one hour, the number of customers one teller can serve = 1/(2/15) = 15/2 = 7.5 (customers/hour)

Therefore, the capacity of one teller in customers per hour is 7.5.

Now, we need to find the capacity of the bank in customers per hour. Since there are four tellers, the capacity of the bank in customers per hour = 4 x 7.5 = 30.

So, the correct option is D. 30.

Learn more about Valley Bank.

brainly.com/question/31230033

#SPJ11

If a $1 million grant is to be divided among four charities, J, K, L, and M.  M will be awarded $200,000 of the grant.

Let the amount awarded to K be x. Then the amounts awarded to L and M will be x + 125,000 and y - 325,000, respectively.

Since the total grant is $1 million, we have:

x + (x + 125,000) + (y - 325,000) + y = 1,000,000

Simplifying this equation, we get:

2x + 2y - 200,000 = 1,000,000

2x + 2y = 1,200,000

x + y = 600,000

We also know that:

y - 125,000 = x + 325,000

y = x + 450,000

Substituting this into the equation x + y = 600,000, we get:

x + (x + 450,000) = 600,000

2x + 450,000 = 600,000

2x = 150,000

x = 75,000

Therefore, the amount awarded to M is:

y - 325,000 = x + 450,000 - 325,000 = $200,000

So, M will be awarded $200,000 of the grant.

Learn more about grant here:https://brainly.com/question/1559476

#SPJ1

The correct order of the set of numbers from least to greatest is 2 3 over 4, 2.71 repeating 71, 5 over 2, square root 5, the correct option is D..

To order the given set of numbers from least to greatest, we need to compare their values. We start by noticing that 2 and 3 over 4 are equivalent to 2.75. Next, we compare the values of the remaining numbers. Since the square root of 5 is approximately 2.236 and 5 over 2 is equivalent to 2.5, we have:

2 3 over 4 < 2.71 repeating 71 < 2.5 < square root 5

Therefore, the set of numbers in order from least to greatest is 2, 3 over 4, 2.71 repeating 71, 5 over 2, square root 5.

Ordering the set of numbers from least to greatest, we get:

2 3 over 4, 2.71 repeating 71, square root 5, 5 over 2.

To learn more about numbers follow the link:

brainly.com/question/17429689

#SPJ1

the scale factor for the dilation is 1.0625. According to the given question

how to find scale factor?

To find the scale factor for the dilation that transforms quadrilateral QRST to Q'R'ST, we need to compare the corresponding side lengths of the two figures. Since the figures are similar, the corresponding sides are proportional to each other.

Let the scale factor be represented by k. Then, we have:

|QR| / |Q'R'| = |RS| / |R'S'| = |ST| / |S'T'| = k

We can use the given information about the coordinates of the vertices to calculate the lengths of the sides.

|QR| = √((4-(-2))² + (1-(-4))²) = √(85)

|RS| = √((2-4)²+ (7-1)²) = √(40)

|ST| = √(((-4)-2)² + (1-7)²) = √(72)

|Q'R'| = √(((-4)-(-8))²+ ((-1)-(-7))²) = √(80)

|R'S'| = √(((-8)-(-2))² + ((-7)-1)²) = √(170)

|S'T'| = √(((-2)-(-4))² + (1-7)²) = √(20)

Therefore, we have:

√(85) /√(80) = √(40) / √(170) =√(72) / √(20) = k

Simplifying, we get:

k = √(85/80) = √(17/16) = 1.0625

Thus, the scale factor for the dilation is 1.0625.

Note: It's important to keep track of the order of the vertices when calculating the lengths of the sides. In this case, we assumed that the vertices were listed in clockwise order around the quadrilateral.

To know more about factors visit :-

https://brainly.com/question/25829061

#SPJ1

Check the picture below, so that's the picture of a parabolic path with a certain initial velocity.

so anyhow, not to bore you to death, the maximum or peak point occurs at the vertex, as you see in the picture, and the x-coordinate is how long it took to get there.

[tex]\textit{vertex of a vertical parabola, using coefficients} \\\\ P(t)=\stackrel{\stackrel{a}{\downarrow }}{-1698}t^2\stackrel{\stackrel{b}{\downarrow }}{+85000}t\stackrel{\stackrel{c}{\downarrow }}{+10000} \qquad \qquad \left(-\cfrac{ b}{2 a}~~~~ ,~~~~ c-\cfrac{ b^2}{4 a}\right) \\\\\\ \left(-\cfrac{ 85000}{2(-1698)}~~~~ ,~~~~ 10000-\cfrac{ (85000)^2}{4(-1698)}\right) \implies \left( - \cfrac{ 85000 }{ -3396 }~~,~~10000 - \cfrac{ 7225000000 }{ -6792 } \right)[/tex]

[tex]\left( \cfrac{ -21250 }{ -849 } ~~~~ ,~~~~ 10000 +\cfrac{ 903125000 }{ 849 } \right) \\\\\\ \left( \cfrac{ 21250 }{ 849 } ~~~~ ,~~~~ \cfrac{ 911615000 }{ 849 } \right) ~~ \approx ~~ (\stackrel{ hrs }{25}~~,~~\stackrel{ population }{1,074,000})[/tex]

The factors of 6[tex]x^{2}[/tex]+ 37x - 60 are 2(x - 2) and 3(x + 5), which is answer c.

To factor the polynomial 6[tex]x^{2}[/tex] + 37x - 60, we need to find two numbers whose product is -360 (the product of the leading coefficient and the constant term) and whose sum is 37 (the coefficient of the linear term).

One way to do this is to list all the possible factor pairs of -360 and look for a pair that adds up to 37. Some of the factor pairs are:

1, -360

2, -180

3, -120

4, -90

5, -72

6, -60

8, -45

9, -40

10, -36

12, -30

15, -24

18, -20

We can see that 15 and -24 add up to 37, so we can use them as the coefficients of the linear term. To get the correct sign, we need to use -24 and 15 instead of 15 and -24.

So we have:

6[tex]x^{2}[/tex] + 37x - 60 = 6[tex]x^{2}[/tex] + 15x - 24x - 60

= 3x(2x + 5) - 12(2x + 5)

= (3x - 12)(2x + 5)

= 6(x - 2)(x + 5)

Therefore, the factors of 6[tex]x^{2}[/tex] + 37x - 60 are 2(x - 2) and 3(x + 5), which is answer c.

To learn more about factors:

https://brainly.com/question/1863222

#SPJ4

a) The series 1/pi = 2sqrt(2)/9801 × summation n=0 to infinity of (4n)!(1103+26390n)/((n!)^4*396^4n) is convergent by the ratio test.

b) If we use just the first term of the series, we get an approximation of pi to one correct decimal place: pi ≈ 6533.008.

If we use two terms of the series, we get an approximation of pi to 14 correct decimal places: pi ≈ 3.14159265358979324.

a) To verify the convergence of the given series, we can use the ratio test.

Let's take the limit of the ratio of the (n+1)th term to the nth term as n approaches infinity:

limit as n approaches infinity of [(4(n+1))!(1103+26390(n+1))/((n+1)!^4396^4(n+1))] / [(4n)!(1103+26390n)/(n!)^4396^4n]

= [(4n+4)(4n+3)(4n+2)(4n+1)(1103+26390n+26390)/(n+1)^4*396^4]

= [(4n+1)^4(1103+26390n+26390)/(n+1)^4*396^4]

= (4n+1)^4(1103+26390n+26390)/(n+1)^4(396^4)

= (4n+1)^4(1103/n+26390+26390/n)/(396^4)

As n approaches infinity, the terms inside the parentheses approach constant values, and we can ignore the n-dependent terms in the numerator and denominator. Thus, the limit simplifies to

= (4^4 × 1103) / (396^4) = 1/(\pi)

Since the limit is less than 1, the series converges by the ratio test.

b) If we use just the first term of the series, we get

1/pi ≈ (2sqrt(2)/9801)×(4!/396^4) = 1.2337 x 10^-4

Taking the reciprocal of both sides, we get

pi ≈ 807104 / 1.2337 ≈ 6533.008

This approximation gives us only one correct decimal place of pi.

If we use two terms of the series, we get

1/pi ≈ (2sqrt(2)/9801)[(4!(1103)+(8!26390))/(396^4(1!^4))]

= 3.1415927300133055 x 10^-1

Taking the reciprocal of both sides, we get

pi ≈ 3.14159265358979324

This approximation gives us 14 correct decimal places of pi.

Learn more about convergence here

brainly.com/question/15415793

#SPJ4

The given question is incomplete, the complete question is:

Around 1910, the Indian mathematician Srinivasa Ramanujan discovered the formula:

1/pi = 2sqrt(2)/9801 * summation n=0 to infinity of (4n)!(1103+26390n)/((n!)^4*396^4n)

William Gosper used this series in 1985 to compute the first 17 million digits of pi.

a) Verify that the series in convergent.

b) How many correct decimal places of pi do you get if you use just the first term of the series? What if you use two terms?

The probability of the spinner landing on keychain is 1/4 or 0.25, which means that for every 4 spins, the spinner is expected to land on keychain once on average.

The measure of the likelihood that an event will occur is known to be Probability.

This is a number between 0 and 1, where 0 represents an impossible event (has no chance of occurring) and 1 represents a definite event (100% chance of occurring).

An event with a probability of 0.5 is equally likely to occur and not to occur. 

To find the probability of the spinner landing on keychain, we need to first determine the total number of spins and the number of times the spinner landed on keychain.

From the given data, we can see that the spinner was spun 8 times, and it landed on keychain twice. Therefore, the probability of the spinner landing on keychain is:

Probability of keychain = Number of times the spinner landed on keychain / Total number of spins

Probability of keychain = 2/8 = 1/4

To know more about number visit:

https://brainly.com/question/11197798

#SPJ1

1. It is not unusual for Joe to roll a four twice in six attempts because a die has 6 sides, so the probability of rolling a four is 1/6 (one in six).

2. If Joe rolled a four three times in six attempts, it would still not be considered unusual because when the probability of rolling a four three times is slightly lower than rolling it twice, it is still not considered a very low probability or unusual occurrence.

It is not unusual for Joe to roll a four twice in six attempts. Here's why:
1. A die has 6 sides, so the probability of rolling a four is 1/6 (one in six).
2. When rolling the die six times, the probability of rolling a four twice can be calculated using the binomial probability

formula:[tex]P(X=k) = (nCk) * (p^k) * (q^(n-k)),[/tex]

where n is the number of trials,

k is the number of successful outcomes,

p is the probability of success, and q is the probability of failure (1-p).
3. In this case, n=6, k=2, p=1/6, and q=5/6.

So, [tex]P(X=2) = (6C2) * (1/6)^2 * (5/6)^4[/tex] ≈ 0.2009 or 20.09%.
4. Since 20.09% is not a low probability, it is not unusual for Joe to roll a four twice in six attempts.
If Joe rolled a four three times in six attempts, it would still not be considered unusual. Here's why:
1. Using the same binomial probability formula as before, we now have k=3.
2. [tex]P(X=3) = (6C3) * (1/6)^3 * (5/6)^3[/tex] ≈ 0.1550 or 15.50%.
3. While the probability of rolling a four three times is slightly lower than rolling it twice, it is still not considered a very low probability or unusual occurrence.

For similar question on unusual.

https://brainly.com/question/13839270

#SPJ11

The circle equation is [tex](x-5)^{2} +(y-2)^{2}[/tex][tex]=52[/tex]. Hence the appropriate answer is [tex](x-3)^{2} +(y+1)^{2} =52[/tex]

A centre is a point in geometry that connects to a polyhedron or other structure. (or centre). The centre of the figure or object may have distinctive characteristics that are significant when studying it.

For example, the centre of a circle is thought to be the spot that is evenly spaced from all other points on the circle. This term, which is commonly represented by the character "O," is defined in terms of the radius, diameter, and circumference of a circle.

Additionally, other geometric constructions like tangent lines and inscribed polygons use the middle of a circle as well. Other geometric shapes may define the middle differently.

Given

The circle's centre is found at the midpoint of the circumference, which can be established by averaging the [tex]x[/tex]- and[tex]y[/tex]-coordinates of the ends:

[tex]centre = (3+7)/2,(-1+5)/2(,5,2)[/tex]

Distance =[tex]\frac{1}{2}[/tex] of diameter= circle radius

[tex]r=\sqrt{(7-3)}[/tex]

[tex]\sqrt{52/2}[/tex][tex]= \sqrt{2+(5-(-1)2)/2}[/tex][tex]13[/tex]

Therefore the circle equation[tex](x-5)^{2} +(y-2)(y-2)^{2}= \sqrt[2]{13^{2} }[/tex]

[tex](x-5)^{2} +(y-2)^{2} =52[/tex]

Hence the appropriate answer is [tex](x-3)^{2} +(y+1)^{2} =52[/tex]

Learn more about circle

https://brainly.com/question/29142813

#SPJ1

The set of solutions for each of the inequalities are given by:

(b) - 4.8 < m < 6.4

(e) x [tex]\geq[/tex] 5

(g) - 11.6 < z < 14

(h) either k < -19/3 or k > 7

Solving the given absolute value inequalities we get,

(b) The given inequality,

|2 - 5m/2| < 14

- 14 < 2 - 5m/2 < 14

-14 - 2 < -5m/2 < 14 - 2

-16 < -5m/2 < 12

-12 < 5m/2 < 16

-12*2 < 5m < 16*2

-24/5 < m < 32/5

- 4.8 < m < 6.4

(e) The given inequality,

2> - |(x-8)/5 + 3/5|

|(x-8)/5 + 3/5| > -2

|(x-8)/5 + 3/5| [tex]\geq[/tex] 0 [Since absolute value is always positive or zero]

(x-8)/5 + 3/5 [tex]\geq[/tex] 0

(x-8+3)/5 [tex]\geq[/tex] 0

x - 5 [tex]\geq[/tex] 0

x [tex]\geq[/tex] 5

(g) The given inequality,

|(5z - 6)/8| < 8

-8 < (5z - 6)/8 < 8

-64 < 5z - 6 < 64

-64 + 6 < 5z < 64 + 6

-58 < 5z < 70

-58/5 < z < 70/5

-58/5 < z < 14

- 11.6 < z < 14

(h) The given inequality,

|(3k - 1)/4| > 5

either, (3k - 1)/4 < -5

3k - 1 < -20

3k < -19

k < -19/3

or, (3k - 1)/4 > 5

3k - 1 > 20

3k > 20 + 1 = 21

k > 21/3

k > 7

Hence the solution sets are:

(b) - 4.8 < m < 6.4

(e) x [tex]\geq[/tex] 5

(g) - 11.6 < z < 14

(h) either k < -19/3 or k > 7

To know more about inequality here

https://brainly.com/question/24372553

#SPJ1

Answer:

The triangles are not similar because

12/24 is not equal to 3/5.

"Neither" is the correct answer.

Answer:

3/7

Step-by-step explanation:

The total is 7 blocks. There are three stars. Probability is PART/WHOLE.

3/7

Answer:

Prompt 1:

Individuals: If someone with lots of side income loses their main job, they will likely have a financial cushion to fall back on. This can help them weather the storm until they find a new job. On the other hand, if someone without a lot of side income loses their main job, they may be more financially vulnerable and may struggle to make ends meet. They may have to dip into their savings or take on debt to cover their expenses until they find a new source of income.

Population: If everyone built side income, it could have a significant impact on the economy. More people would have additional income streams, which could lead to increased consumer spending and investment. This could, in turn, drive economic growth and create more jobs. However, there could also be downsides to this. If everyone were to focus on building side income, it could lead to a shortage of labor in traditional full-time jobs. This could make it difficult for some businesses to find qualified employees, which could slow down economic growth.

Prompt 2:

Individuals: Building side income can be challenging for people who are already working multiple part-time jobs or who have physical or other challenges. They may not have the time or energy to invest in building a side business or pursuing other opportunities. On the other hand, people with a high salary but who work long hours may have less time to dedicate to side income pursuits, even if they have the financial resources to do so. There may be other situations that make it easier or harder to build side income, such as access to capital, knowledge and skills, and support networks.

Population: While side income can help individuals increase their income, it may not be a viable solution to poverty on a large scale. Some people may not have the resources, knowledge, or opportunities to build side income streams, especially if they are already working long hours or struggling with physical or other challenges. To address poverty, it may be necessary to focus on creating more full-time jobs that provide livable wages and benefits. However, side income can still be a valuable supplement to a regular income, especially for those who have the time and resources to invest in building additional income streams.

Step-by-step explanation:

In addition, it's important to note that side income alone may not be enough to lift people out of poverty. In many cases, people living in poverty face systemic barriers such as lack of access to education, healthcare, and affordable housing. Addressing these issues requires more comprehensive solutions that go beyond income supplementation.

Furthermore, it's worth considering the impact of side income on income inequality. While side income can help some individuals increase their income, it may not be a viable solution for everyone. The ability to generate side income may be influenced by factors such as access to education, social networks, and financial resources. Therefore, promoting side income as a solution to poverty without addressing these underlying issues could potentially widen the gap between the rich and the poor.

In conclusion, while side income can provide financial benefits for individuals and potentially stimulate economic growth on a larger scale, it's important to consider the nuances and limitations of this income source. As with any economic issue, there are no easy solutions, and it's necessary to take a comprehensive and nuanced approach to address poverty and promote economic prosperity.

Diversifying income streams can give individuals financial stability and the economy can potentially benefit from increased consumer spending. However, building side income may not be feasible for everyone and while it could be part of poverty alleviation, it can't be the sole solution.

In the domain of microeconomics, individuals with significant side income may have financial security even if they lose their main job. This is because their side income can serve as a bridge, mitigating the possible financial strain of job loss. In contrast, those without much side income may face financial hardships if they lose their main job. It is therefore important for individuals to diversify income sources when possible.

From a macroeconomics perspective, if everyone developed side income, it could stimulate economic activity as income levels increase. Increased disposable income could lead to higher consumer spending, igniting broader economic stimulation. However, it might also lead to intensification of work, reducing leisure time and possibly impacting worker mental health and productivity.

Those who work multiple part-time jobs or have sizeable primary-job commitments might find it difficult to secure time for side-income-generating activities. On the other hand, individuals with higher salaries and flexible work schedules might have both the funding and time to establish and nurture a robust side income.

Side income could be a viable solution to poverty if it was accessible to everyone. This would require educational and entrepreneurial initiatives to equip individuals with the skills and opportunities necessary to generate extra income. However, side income alone is not a magic bullet and should be part of a suite of strategies to eradicate poverty.

https://brainly.com/question/3032774

#SPJ2

Answer:

Step-by-step explanation:

We can use the Pythagorean Theorem to find the distances from B to C and from A to B.

The Pythagorean Theorem states that in a right triangle, the square of the length of the hypotenuse (the longest side) is equal to the sum of the squares of the lengths of the other two sides.

Let's first find the distance from B to C. We can see that the length from B to C is the hypotenuse of a right triangle with legs of length 10 feet and 20 feet. So, using the Pythagorean Theorem, we can write:

distance from B to C = sqrt(10^2 + 20^2)

distance from B to C = sqrt(500)

distance from B to C ≈ 22.36 feet (rounded to the nearest tenth)

Therefore, the distance from B to C is approximately 22.36 feet.

Now, let's find the distance from A to B. We can see that the width of the room, from A to B, is the hypotenuse of a right triangle with legs of length 10 feet and 48 feet. So, using the Pythagorean Theorem, we can write:

distance from A to B = sqrt(10^2 + 48^2)

distance from A to B = sqrt(2354)

distance from A to B ≈ 48.5 feet (rounded to the nearest tenth)

Therefore, the distance from A to B is approximately 48.5 feet.

A triangle has two angles that are 73° and 24° in size. The third angle is 83 degrees in length.

The sum of all the angles in a triangle is always 180 degrees. So, we can utilize this fact to get the third angle's measurement:

Let's call the third angle "x". Then we have:

73° + 24° + x = 180°

Simplifying this equation, we get:

97° + x = 180°

Subtracting 97 degrees from both sides, we get:

x = 83°

Therefore, the measure of the third angle is 83 degrees.

To learn more about triangle, refer:-

https://brainly.com/question/2773823

#SPJ1

The answer of the given question based on the theoretically optimal solution is ,False.

A model refers to a simplified representation of a real-world system or phenomenon that is used to gain insights, make predictions, or solve problems. Models in math can take many forms, including mathematical equations, geometric shapes, graphs, or diagrams.

Mathematical models are often used in various fields like physics, engineering, economics, and biology to represent and analyze complex phenomena. These models are constructed using mathematical principles and are based on assumptions and simplifications of the real-world system they represent.

False.

In project 8, the out-of-sample results are expected to provide an estimate of how well the model is expected to perform on new, unseen data. The out-of-sample results are not necessarily expected to the track closely with or exceed  results of theoretically optimal solution (TOS), as TOS is based on training data and may not generalize well to new data. The goal is to find a model that performs well on both the training data and new, unseen data, so the out-of-sample results are used to evaluate the generalization performance of the model.

To know more about Mathematical equations visit:

https://brainly.com/question/29514785

#SPJ1

The length of the third side is x= 8 (nearest rounded to the tenth).

The line segment in a triangle connecting the midway of two sides of the triangle is said to be parallel to its third side and is also half the length of the third side, according to the midpoint theorem.

By using the midpoint theorem, we get

The line is parallel to its third side x and is also half the length of the third side, therefore we can write

X= [tex]\frac{1}{2} * 15[/tex]

X = 7.5

Rounded the value nearest tenth

X = 8

Learn more about the mid-point theorem here:

https://brainly.com/question/13677972

#SPJ1

The probability that teacher send 3 or 4 text every day is option B = 0.5

Probability is the measure of the likelihood of an event occurring. It is typically represented as a number between 0 and 1, where 0 indicates that the event is impossible, and 1 indicates that the event is certain.

To find the probability of an event, you need to identify the number of ways the event can occur and the total number of possible outcomes.

The formula for probability is:

Probability = Number of favorable outcomes / Total number of outcome

The probabilities of P(X=3) and P(X=4) must be added in order to determine the likelihood that the teacher sends 3 or 4 texts per day:

P(X=3 or X=4)=P(X=3) + P(X=4)=0.1 + 0.4 = 0.5

The likelihood that the teacher will send three or four texts every day is therefore 0.5.

Learn more about Formula of Probability here

https://brainly.com/question/28564973

#SPJ1

The social science majors at your university compare to national mac computer preference norms for college students statistical decision is  5.83.

The gathering, characterization, analysis, and drawing of inferences from quantitative data are all tasks that fall under the purview of statistics, a subfield of applied mathematics. Probability theory, linear algebra, and differential and integral calculus play major roles in the mathematical theories underlying statistics.

Finding valid inferences about big groups and general occurrences from the behaviour and other observable features of small samples is a major challenge for statisticians, or persons who study statistics. These tiny samples are representative of a small subset of a larger group or a small number of isolated occurrences of a widespread phenomena.

Proportion of students who preferred PC's to Mac (P) = 0.62

Sample size (n) = 200

Sample proportion of students who prefer Mac's to PCs = 0.82

To compare the proportion of students with Mac preference for college students a Z-test for single proportion will e conducted. The hypothesis is formulated as follows:

H o: There is no significant difference in the national proportion and college preference

H1 : There is a significant difference in the national proportion and college preference

The test statistic is computed below:

[tex]z=\frac{p-p_0}{\sqrt{\frac{p_0(1-p_0)}{n} } }[/tex]

[tex]z=\frac{0.82-0.62}{\sqrt{\frac{0.62(1-0.62)}{200} } }[/tex]

= 5.8272

Thus, the value of the test statistic is 5.83.

Learn more about Statistical decision:

https://brainly.com/question/20116913

#SPJ4

By answering the presented question, we may conclude that Because the likelihood of a student possessing a smartphone is the same for each participant, the trials are similar.

A variable is something that may be changed in the context of a mathematical problem or experiment. A variable is often indicated by a single letter. Variables are commonly represented by the letters x, y, and z. A variable is a property that can be measured and has a large range of values. A few examples of criteria are size, age, affluence, location of birth, academic status, and kind of dwelling. Variables may be classified into two basic groups using both category and numerical methods.

X is a random variable that represents the amount of times a given number is rolled in 20 rolls of a 20-sided dice. This circumstance does not fit the binomial distribution model because the following four conditions are not met:

The trials are not independent since the outcome of each dice roll influences the odds of the succeeding rolls.

The success probability is not set since it is determined by the number chosen to count as a success.

Because the possibilities of each event are not equal, the trials are not similar.

The number of trials is predetermined.

X is a random variable that represents the number of successful free throws out of 100. Because the four prerequisites are satisfied, this scenario follows a binomial distribution model:

Because the outcome of one free throw does not impact the outcome of another, the trials are independent.

The success probability is set at 0.6.

Because the probability of making a free throw is the same for each shot, the trials are similar.

The trial count is set at 100.

X is a random variable that represents the number of cards drawn before receiving two spades in a row. This circumstance does not fit the binomial distribution model because the following four conditions are not met:

The trials are not independent since the outcome of each draw influences the likelihood of subsequent pulls.

The likelihood of success is not fixed because it is determined by the outcome of the prior pull (s).

Because the possibilities of each event are not equal, the trials are not similar.

The number of trials is not predetermined.

X is a random variable that represents the number of students out of 200 who own smartphones. Because the four prerequisites are satisfied, this scenario follows a binomial distribution model:

The trials are independent since one student's possession of a smartphone has no bearing on the outcome of another student.

The success probability is set at 0.85.

Because the likelihood of a student possessing a smartphone is the same for each participant, the trials are similar.

The trial count is set at 200.

To know more about variable visit:

https://brainly.com/question/2466865

#SPJ1

The coefficient of determination is not the square root of the correlation coefficient.

The coefficient of determination refers to the proportion of the variance in the dependent variable that is accounted for by the independent variable.

It is the square of the correlation coefficient and ranges between 0 and 1, with 0 indicating no correlation, while 1

indicates a perfect correlation.

The coefficient of determination is a measure of how much variation exists between two variables, with a higher value

indicating a stronger relationship between the two variables.

Additionally, the group of answer choices can indicate whether the correlation coefficient is significant, and the

coefficient of determination is not the square root of the correlation coefficient.

for such more question on coefficient

https://brainly.com/question/4219149

#SPJ11

After 8 hours, the freezer is at a temperature of 8°C.The temperature sequence for the first 8 hours after the freezer was unplugged is as follows:

Time (hours) Temperature (°C)

0                          -14

1                           -11

2                             -8

3                             -5

4                             -2

5                               1

6                               0

7                               4

8                                8

Temperature is a physical quantity that expresses the degree of hotness or coldness of an object or a living being.

The direction in which heat energy will spontaneously flow from a hotter body (one at a higher temperature) to a colder body (one at a lower temperature) is indicated by temperature, and it is expressed in terms of any of several arbitrary scales

Find out more about Temperature

brainly.com/question/13454793

#SPJ4

Answer:

Step-by-step explanation:

To find the frequency for which the particular solution to the differential equation has the largest amplitude, we first need to know the differential equation we are working with. However, since you didn't provide the specific differential equation, let's work with a general example: a forced harmonic oscillator. The equation for a forced harmonic oscillator can be written as:

m * d²x/dt² + c * dx/dt + k * x = F0 * cos(ωt)

where:

m is the mass of the oscillator

x is the displacement of the oscillator

c is the damping coefficient

k is the spring constant

F0 is the amplitude of the external force

ω is the angular frequency of the external force

For this type of equation, we can find the particular solution in the form:

x_p(t) = X * cos(ωt - δ)

where:

X is the amplitude of the particular solution

δ is the phase angle

We can rewrite the differential equation in the frequency domain by substituting x(t) = X * cos(ωt - δ) and its derivatives into the original equation, then applying the trigonometric identities. After simplifying, we can find the expression for X, the amplitude of the particular solution:

X = F0 / sqrt((k - mω²)² + (cω)²)

To find the frequency for which the particular solution has the largest amplitude, we need to maximize X with respect to ω. To do this, we can find the critical points by differentiating X with respect to ω and setting the result to zero:

dX/dω = 0

To simplify the problem, we can define the damping ratio ζ = c / (2 * sqrt(m * k)) and the undamped natural frequency ω_n = sqrt(k / m). The expression for X becomes:

X = F0 / sqrt((ω_n² - ω²)² + (2 * ζ * ω_n * ω)²)

Now, we differentiate X with respect to ω and set it to zero. Solving for ω, we get:

ω = ω_n * sqrt(1 - 2ζ²)

This is the frequency for which the particular solution to the differential equation has the largest amplitude, assuming a positive frequency and that the damping ratio ζ is less than 1 / sqrt(2). Otherwise, the system will be overdamped, and there will be no resonant frequency.

the frequency for which the particular solution to the differential equation has the largest amplitude is:

ω = √(γ/2 - β^2)

To find the frequency for which the particular solution to the differential equation has the largest amplitude, we can assume that the particular solution is of the form:

y(t) = A*cos(ωt + φ)

where A is the amplitude, ω is the frequency, and φ is the phase angle.

Substituting this form of y(t) into the differential equation gives:

-ω^2Acos(ωt + φ) - 2βωAsin(ωt + φ) + γA*cos(ωt + φ) = f(t)

Simplifying this equation gives:

(A/|D|)[γcos(ωt + φ) - ω^2cos(ωt + φ) - 2βω*sin(ωt + φ)] = f(t)

where |D| is the modulus of the denominator of A*cos(ωt + φ) and is given by:

|D| = √[ (γ - ω^2)^2 + (2βω)^2 ]

To find the frequency for which the amplitude of the particular solution is largest, we need to minimize the modulus of the denominator |D| over all frequencies ω. We can do this by finding the critical points of |D| with respect to ω and then checking which of these critical points correspond to a minimum.

Differentiating |D| with respect to ω gives:

d|D|/dω = [2ω(γ - ω^2) - 4β^2ω]/|D|

Setting this equal to zero and solving for ω gives:

ω = ±√(γ/2 - β^2)

We can see that there are two critical points for |D|, one positive and one negative. To check which of these corresponds to a minimum, we can use the second derivative test:

d^2|D|/dω^2 = (2γ - 6ω^2)/|D|^3

Substituting ω = ±√(γ/2 - β^2) into this expression gives:

d^2|D|/dω^2 = ±4√2β^3/γ^(3/2)

Since β and γ are both positive, the second derivative is negative for both critical points, which means that they both correspond to maxima of |D|. The positive critical point corresponds to the frequency for which the amplitude of the particular solution is largest.

for more questions on frequency

https://brainly.com/question/17803539

#SPJ11

We can use the exponential function [tex]N(t) = N0 * 2^(t/2)[/tex] to determine the number of transistors in a car that doubles every two years.

An exponential function with the following form can be used to calculate the number of transistors in an automobile whose number doubles every two years:

[tex]N(t) = N0 * 2^(t/2)[/tex]

Where t is the amount of time in years after the initial measurement, N0 is the number of transistors at the start, and N(t) is the number of transistors at time t.

We can use this technique to determine the number of transistors in the car in any odd year since 1974, when there were 4100 in it.

For instance, we may insert in t = 15 to determine the quantity of transistors in 1989:

transistors N(15) = 4100 * 2(15/2) = 261,632

Similarly, we may enter t = 19 to calculate the number of transistors in 1993:

522,724 transistors are found in N(19) = 4100 * 2(19/2)

In 1997, we can enter t = 23:

1,045,449 transistors make up N(23) = 4100 * 2(23/2)

In summary, we may calculate the number of transistors in an automobile whose number doubles every two years using the exponential equation [tex]N(t) = N0 * 2(t/2)[/tex]. We can determine the number of transistors in a car in any odd year with an initial measurement of 4100 transistors in 1974.

Learn more about exponential function here:

https://brainly.com/question/14355665

#SPJ1

The conclusion supported by the image of the lines is that when two parallel lines are rotated about the origin, they remain parallel to each other.

1. Observe the initial graph with two parallel lines.
2. Rotate the lines about the origin by the given angle.
3. Observe the image of the lines after the rotation.
4. Notice that the lines still maintain the same distance apart and do not intersect, meaning they are still parallel to each other.

If two lines do not intersect, they are said to be parallel.

The lines' slopes are identical. If m1=m2, then f(x) =m1x + b1 and

g(x)= m2x + b2 are parallel.

If m 1 = m 2, then f (x) = m 1 x + b 1 and g (x) = m 2 x + b 2 are parallel equations.

The coordinate axes are rotated about the origin (0,0) in counter clockwise direction through an angle of 60∘ .

For similar question on parallel.

https://brainly.com/question/1439696

#SPJ11