The reference sound intensity is 1×10^-12.Intensity is defined as the amount of sound energy passing per second through unit area perpendicular to the direction of sound propagation.
The formula for intensity is:
I = (P / 4πr²)
Where P = Power output of the source
= 60W.
r = Distance from the source
= 10
mπ = 3.14
Substituting the values in the formula we get,
I = (60 / 4 × 3.14 × (10)²)≈ 0.48 W/m²
Therefore, the intensity at 10 m away from the source is 0.48 W/m².(ii) Calculation of the distance at which the sound pressure level is 58 dB when reference sound intensity is 1×10^-12 (Watts /m^2 ).The formula for sound pressure level (SPL) is given as: we get:r ≈ 257 m .Therefore, the distance at which the sound pressure level is 58 dB when the reference sound intensity is 1×10^-12 (Watts /m^2) is approximately 257 m.
To know more about area perpendicular visit:
https://brainly.com/question/29089041
#SPJ11
The distance at which the sound pressure level is 58 dB when the reference sound intensity is 1×10^-12 (Watts /m^2) is approximately 257 m.
The reference sound intensity is 1×10^-12.
Intensity is defined as the amount of sound energy passing per second through unit area perpendicular to the direction of sound propagation.
The formula for intensity is:
I = (P / 4πr²)
Where P = Power output of the source
= 60W.
r = Distance from the source
= 10
mπ = 3.14
Substituting the values in the formula we get,
I = (60 / 4 × 3.14 × (10)²)≈ 0.48 W/m²
Therefore, the intensity at 10 m away from the source is 0.48 W/m².(ii) Calculation of the distance at which the sound pressure level is 58 dB when reference sound intensity is 1×10^-12 (Watts /m^2 ).
The formula for sound pressure level (SPL) is given as: we get:r ≈ 257 m .
Therefore, the distance at which the sound pressure level is 58 dB when the reference sound intensity is 1×10^-12 (Watts /m^2) is approximately 257 m.
To know more about distance visit:
brainly.com/question/29089041
#SPJ11
16. In a library the ratio of English books to Math books, is the same as the ratio of Math books to Science book. If there are 1200 books on English and 1800 books on Math, find the number of Science books.
17. Set up all the possible proportions from the numbers 12, 15, 8, 10.
18. Find the first term, if second, third and fourth terms are 21, 80, 120.
19. Find the second term, if first, third and fourth terms are 15, 27, 63.
20. Find the mean term, if the other two terms of a continued proportion are 15 and 60.
Answers for practice test on ratio and proportion are given below to check the exact answers of the questions.
The second term is 40.20. Let the mean term be x.Given, the two terms are 15 and 60.
Hence, x² = 15 × 60 ⇒ x = 30
Therefore, the mean term is 30.
16. Let the number of science books be x.
Therefore, the ratio of English books to Math books
= 1200/1800
= 2/3
The ratio of Math books to Science books
= 1800/x
Equating the two ratios,
we get:2/3
= 1800/x ⇒ x
= 2700
Thus, the number of Science books is 2700.17.
The four given numbers are 12, 15, 8, 10.
The possible proportions are:
12:15
= 4:512:8
= 3:212:10
= 6:515:8
= 15:815:10
= 3:220:8
= 5:220:10
= 2:118:10
= 9:5.18.
Let the first term be x.Common ratio, r
= (80/21)
= (120/80)
= (n/120) ⇒ n
= 180
Therefore, x
= 21/5
= 4.219.
Let the second term be x.Common ratio, r
= (27/15)
= (63/27)
= (81/x) ⇒ x
= 40.
The second term is 40.20. Let the mean term be x.Given, the two terms are 15 and 60.
Hence, x²
= 15 × 60 ⇒ x
= 30
Therefore, the mean term is 30.
To know more about term visit:
https://brainly.com/question/15387441
#SPJ11
Determine the temperature of a reaction if K = 1.20 x 10-6 when AG° = +16.00 kJ/mol.
To convert kJ/mol to J/mol, multiply the given value by 1000:`AG° = 16.00 × 10³ J/mol T = 430.29 K. The temperature of a reaction if K = 1.20 × 10⁻⁶ when AG° = +16.00 kJ/mol is 157.14 °C approximately.
Let's convert the temperature in Kelvin to Celsius by subtracting 273.15:430.29 K - 273.15 = 157.14 °CSo.
The temperature of a reaction if K = 1.20 × 10⁻⁶ when AG° = +16.00 kJ/mol is given below;
According to the Gibbs-Helmholtz equation, the equilibrium constant K is related to the change in Gibbs free energy (AG°) of a reaction and the temperature (T) as follows:
`K = e^(-AG°/RT)`Where R is the universal gas constant (8.314 J K⁻¹ mol⁻¹), T is the temperature in Kelvin, and e is the mathematical constant (~ 2.718).
So, the temperature of a reaction if K = 1.20 × 10⁻⁶ when AG° = +16.00 kJ/mol is given as follows;`K = e^(-AG°/RT)`Let's rearrange this equation to solve for T:`lnK = -AG°/RT
Substitute the given values in the equation: AG° = +16.00 kJ/molK = 1.20 × 10⁻⁶R = 8.314 J K⁻¹ mol⁻¹
Substitute these values in the equation and solve for T:`ln(1.20 × 10⁻⁶) = -(16.00 × 10³)/(8.314 × T)`Solve for T:`T = -(16.00 × 10³)/(8.314 × ln(1.20 × 10⁻⁶))`T = 273.15 × (-(16.00 × 10³)/(8.314 × ln(1.20 × 10⁻⁶)))
Learn more about Kelvin:
https://brainly.com/question/30708681
#SPJ11
If a ball is thrown vertically upward with an initial velocity of 160 ft/s, then its height after t seconds is s = 160t - 16t². (Consider up to be the positive direction.) (a) What is the maximum height (in ft) reached by the ball? ft (b) What is the velocity (in ft/s) of the ball when it is 384 ft above the ground on its way up? ft/s What is the velocity (in ft/s) of the ball when it is 384 ft above the ground on its way down? ft/s
The height (in meters) of a projectile shot vertically upward from a point 3 m above ground level with an initial velocity of 23.5 m/s is h = 3 + 23.5t - 4.9t² after t seconds. (a) Find the velocity (in m/s) after seconds and after 4 seconds. v(2) = m/s v(4) = m/s (b) When does the projectile reach its maximum height? (Round your answer to two decimal places.) (c) What is the maximum height? (Round your answer to two decimal places.) m (d) When does it hit the ground? (Round your answer to two decimal places.) S (e) with what velocity (in m/s) does it hit the ground? (Round your answer to two decimal places.) m/s
The velocity of the ball when it is 384 ft above the ground on its way down is 0 ft/s.
(a) The maximum height is found at the vertex of the quadratic equation s = 160t - 16t². By using the formula t = -b/2a (where a = -16 and b = 160), we determine the time t = 5 seconds. Substituting this into the equation, we find the maximum height: s = 160(5) - 16(5)² = 400 ft.
(b) The velocity function v(t) is obtained by differentiating the position equation: v(t) = 160 - 32t.
When the ball is 384 ft above the ground on its way up (t = 2 seconds), we find v(2) = 96 ft/s.
When the ball is 384 ft above the ground on its way down (t = 5 seconds, maximum height), we find v(5) = 0 ft/s.
To learn more about quadratic equation click here
brainly.com/question/29269455
#SPJ11
You desire a cold, refreshing glass of water. You grab 20.0 g of ice at -7.2 °C. You add your ice to a thermos with 85.0 mL of water at 21.7 °C and wait until thermal equilibrium is established. Write your answers in the blanks provided. Show your work below. a) How much ice is present at thermal equilibrium? 5 grams b) What is the final temperature of the system? °C ice asystem = -asen 10
a. The mass of ice present at thermal equilibrium is mass of ice = 20.0 g * (T₃ - 21.7 °C) / 41.84 = 5 g.
b. The final temperature of the system is 22.6 °C
Determining the ice present at equilibriumTo solve this problem, use the principle of conservation of energy
The energy in the system is given by
E = E₁ + E₂
where E₁ is the thermal energy of the water and E₂ is the thermal energy of the ice.
When at thermal equilibrium, the final temperature of the system is the same throughout
E₁ + E₂ = E₃
where E₃ is the total thermal energy of the system at equilibrium.
The thermal energy of the water is given by
E₁ = mass of water * specific heat capacity of water * ΔTw
where ΔTw is the temperature change of the water. Since the water is at 21.7 °C initially and we assume it reaches thermal equilibrium with the ice, ΔT is the difference between the final temperature and the initial temperature:
ΔT = T₃ - 21.7
where T₃ is the final temperature of the system.
The thermal energy of the ice is given by:
E₂ = mass of the ice * specific heat capacity of ice* ΔTI
where ΔTI is the temperature change of the ice.
Since the ice is initially at -7.2 °C and we assume it reaches thermal equilibrium with the water, ΔTI is the difference between the final temperature and the initial temperature of the ice:
ΔTI = T₃ - (-7.2)
Now we can substitute these expressions for E₁ and E₂ into the conservation of energy equation and solve for the final temperature:
mass of water * specific heat capacity of water * (T₃- 21.7) + mass of ice * specific heat capacity of ice * (T₃+ 7.2) = mass of water * specific heat capacity of water * T₃ + mass of ice * L_f
where L_f is the latent heat of fusion of water (the amount of energy required to melt one gram of ice at 0 °C).
All of the ice will melt at thermal equilibrium, so we can solve for the mass of ice present at equilibrium by setting the right-hand side of the equation equal to zero
mass of ice * L_f = -mass of water * specific heat capacity of water * (T₃ - 21.7)
mass of ice = mass of water * specific heat capacity of water * (T₃ - 21.7) / L_f
Substitute the given values
mass of ice = 85.0 g * 4.18 J/(g·K) * (T₃ - 21.7 °C) / (333.5 J/g)
mass of ice = 20.0 g * (T₃- 21.7 °C) / 41.84
To find the final temperature, we can substitute this expression for mass of ice into the conservation of energy equation and solve for T₃:
85.0 g * 4.18 J/(g·K) * (T₃ - 21.7 °C) + 20.0 g * 2.09 J/(g·K) * (T₃ + 7.2 °C) = 0
355.3 T₃ - 8033.6 = 0
T₃ = 8033.6/355.3
= 22.6 °C
Therefore, the final temperature of the system is 22.6 °C, and the mass of ice present at thermal equilibrium is mass of ice = 20.0 g * (T₃ - 21.7 °C) / 41.84 = 5 g.
Learn more on thermal equilibrium on https://brainly.com/question/2642609
#SPJ4
1. Find the gross pay of an employee who worked 22 3/4 hours at an hourly rate of P18.00. 2. Patty received P618.75 gross pay for 33 hours worked. What is her hourly rate? 1. Determine the total hours worked by George if his hourly rate is P18.90 and his gross pay is P1,474.20. 2. Nancy works as a hairstylist. Her gross pay for last week was P407.00 and her hourly rate is P18.50. Calculate her total hours worked. 3. On Tuesday and Thursday, Margie worked 9 1/2 hours each day. Monday: Wednesday and Friday, she worked 7 hours each day. Her hourly rate is P20.00 plus time-and-a-half for any hours in excess of 8 per day. What is her gross pay? 4. Carol was paid P14.50 per hour with time-and-a-half for all hours worked in excess of 8 hours per day. She worked 9 ½ hours on Monday, 10 on Tuesday, 6 on Wednesday, 8 on Thursday and 11 on Friday. Find Carol's total pay for the week.
These calculations provide insights into the employee's earnings, hourly rates, and total hours worked, facilitating proper compensation and payroll management.
What is the gross pay for an employee who worked 22 3/4 hours at an hourly rate of P18.00?In the given scenarios, various calculations are performed to determine gross pay, hourly rate, or total hours worked.
The gross pay of an employee is calculated by multiplying the number of hours worked by the hourly rate.
To find the hourly rate, the gross pay is divided by the number of hours worked.
In some cases, the total hours worked are calculated by dividing the gross pay by the hourly rate.
Additional factors such as overtime or time-and-a-half rates are taken into account to calculate the gross pay accurately.
Learn more about compensation
brainly.com/question/28250225
#SPJ11
If a vertical sea wall is impacted by an incident wave at an angle of 35 degrees that does not break, how much of the incident wave energy will be reflected, and at what angle?
The amount of incident wave energy reflected by a vertical sea wall can be determined using the principle of conservation of energy. When an incident wave strikes a vertical wall, the energy is partially reflected back into the water.
Assuming an incident wave with an angle of 35 degrees, the angle of reflection will be equal to the angle of incidence due to the vertical orientation of the wall. Therefore, the reflected wave will also have an angle of 35 degrees.
To calculate the proportion of reflected wave energy, we can use the equation for wave reflection coefficient (R):
R = (I_r / I_i)²
Where R is the reflection coefficient, I_r is the intensity of the reflected wave, and I_i is the intensity of the incident wave.
Since the incident wave does not break, we can assume its energy remains constant. Hence, the reflection coefficient can be simplified as follows:
R = (E_r / E_i)²
Where E_r is the energy of the reflected wave and E_i is the energy of the incident wave.
The proportion of reflected wave energy can then be determined by taking the square root of the reflection coefficient:
Proportion of reflected wave energy = √R
However, without specific information about the wave characteristics or the properties of the sea wall, it is not possible to provide a numerical value for the proportion of reflected wave energy. The calculations mentioned above are general principles applied in wave mechanics
To know more about energy, visit;
https://brainly.com/question/2003548
#SPJ11
Nick has £1200.
He pays £449 for a new TV.
His mortgage payment is £630.
How much money does he have left after paying for the TV and
paying his mortgage?
To calculate how much money Nick has left after paying for the TV and his mortgage, we need to subtract the total expenses from his initial amount.
Total expenses = TV payment + Mortgage payment
Total expenses = £449 + £630
Total expenses = £1079
Money left = Initial amount - Total expenses
Money left = £1200 - £1079
Money left = £121
Therefore, Nick has £121 left after paying for the TV and his mortgage.
Hopes this helps you out :D
how
can geophysics survey methods be used in geometric road
designs
Geophysics survey methods aid in geometric road design by identifying soil layers with varying properties, such as strength, bearing capacity, compressibility, and deformation. This information helps engineers determine the best location, optimal design, and material requirements. Geophysical survey methods also help identify sinkholes and subsurface features, ensuring solid ground for road construction.
Geophysics survey methods are essential in geometric road designs, as they help identify soil layers with varying properties and strengths. These properties include soil strength, bearing capacity, compressibility, and deformation. Understanding these properties helps engineers determine the best location, optimal design, and material requirements for the road. Geophysics survey methods are particularly useful in locating buried utilities and identifying potential sinkholes, underground cavities, and other subsurface features that could affect road construction. This information is crucial for ensuring the road is built on solid ground that supports vehicle weight and withstands environmental factors.
The information obtained from geophysics survey methods can be used to create a subsurface map of the road site, which is then used to develop the best road design. Overall, geophysics survey methods are crucial in determining the properties of soil and subsurface features in geometric road designs, ultimately ensuring a safe and environmentally friendly road.
To know more about Geophysics survey methods Visit:
https://brainly.com/question/33113350
#SPJ11
Death Valley National Park, in California and Nevada, is the site of the lowest elevation in the Western Hemisphere. Bad water Basin in the park is about 86 meters below sea level.
What is the wavelength in nanometers (nm) of a photon that has an energy of 4.38×10^−18 J ?
The wavelength of the photon with an energy of 4.38 × 10^(-18) J is approximately 1.51 × 10^3 nm.
To determine the wavelength of a photon with a given energy, we can use the equation:
E = h * c / λ
where:
E is the energy of the photon,
h is the Planck's constant (approximately 6.626 × 10^(-34) J·s),
c is the speed of light in a vacuum (approximately 2.998 × 10^8 m/s),
and λ is the wavelength of the photon.
We can rearrange the equation to solve for wavelength:
λ = h * c / E
Plugging in the values:
E = 4.38 × 10^(-18) J
h = 6.626 × 10^(-34) J·s
c = 2.998 × 10^8 m/s
λ = (6.626 × 10^(-34) J·s * 2.998 × 10^8 m/s) / (4.38 × 10^(-18) J)
Simplifying the expression, we find:
λ = 1.51 × 10^(-6) m
To convert meters to nanometers, we multiply by 10^9:
λ = 1.51 × 10^(-6) m * 10^9 nm/m
λ = 1.51 × 10^(3) nm
Therefore, the wavelength of the photon with an energy of 4.38 × 10^(-18) J is approximately 1.51 × 10^3 nm.
To learn more baout wavelength visot:
https://brainly.com/question/10750459
#SPJ11
Which equation shows the variable terms isolated on one side and the constant terms isolated on the other side for the equation -1/2x + 3 = 4 - 1/4x?
Answer:
x = -4
Step-by-step explanation:
To isolate the variable terms on one side and the constant terms on the other side of the equation -1/2x + 3 = 4 - 1/4x, we can follow these steps:
Move the constant term "3" to the right side of the equation by subtracting 3 from both sides:
-1/2x + 3 - 3 = 4 - 1/4x - 3
-1/2x = 1 - 1/4x
Combine like terms on each side of the equation:
-1/2x + 0 = 1 - 1/4x
Move the variable term "-1/4x" to the left side of the equation by adding 1/4x to both sides:
-1/2x + 1/4x = 1 - 1/4x + 1/4x
(-1/2 + 1/4)x = 1
Simplify the coefficients on the left side:
(-2/4 + 1/4)x = 1
(-1/4)x = 1
Multiply both sides of the equation by the reciprocal of -1/4, which is -4:
-4 * (-1/4)x = 1 * (-4)
x = -4
Therefore, the equation with the variable terms isolated on one side and the constant terms isolated on the other side is x = -4.
5. Suppose you take a 30 -year fixed-rate mortgage for $250,000 at 5.25%, monthly payments with a two discount point rebate (negative discount points) to the borrower. Assume that you have no other financing fees. A. ( 1pt) What is the APR of the loan? B. (1 pt) What is the effective cost with a five-year holding period?
A. The APR of the loan is 152.4%.
B. The effective cost with a five-year holding period is $282,656.80.
A. To calculate the APR (Annual Percentage Rate) of the loan, let's go through the steps:
Calculate the discount points:
Discount Points = Loan Amount * (Discount Points / 100)
Discount Points = $250,000 * (2 / 100)
Discount Points = $5,000
Calculate the total amount received by the borrower (after subtracting the discount points):
Loan Amount Received = Loan Amount - Discount Points
Loan Amount Received = $250,000 - $5,000
Loan Amount Received = $245,000
Step 3: Calculate the effective interest rate:
Effective Interest Rate = (Total Interest Paid / Loan Amount Received) * (1 / Loan Term in Years)
Number of Payments = Loan Term in Years * 12
Number of Payments = 30 * 12 = 360
Monthly Interest Rate = Annual Interest Rate / 12
Monthly Interest Rate = 5.25% / 12 = 0.4375%
Monthly Payment = (Loan Amount Received * Monthly Interest Rate) / (1 - (1 + Monthly Interest Rate [tex])^{-Number of Payments}[/tex]
Monthly Payment = ($245,000 * 0.4375%) / (1 - (1 + 0.4375%) [tex]^ -^3^6^0[/tex])
Monthly Payment ≈ $1,360.94
Total Interest Paid = Monthly Payment * Number of Payments - Loan Amount Received
Total Interest Paid = $1,360.94 * 360 - $245,000
Total Interest Paid ≈ $195,535.46
Effective Interest Rate = (Total Interest Paid / $245,000) * (1 / 30)
Effective Interest Rate ≈ 0.127 or 12.7%
APR = Effective Interest Rate * 12
APR ≈ 12.7% * 12
APR ≈ 152.4%
Therefore, the APR of the loan is approximately 152.4%.
B. To calculate the effective cost with a five-year holding period, let's go through the steps:
Total Interest Paid = Monthly Payment * Number of Payments - Loan Amount Received
Total Interest Paid = $1,360.94 * (5 * 12) - $245,000
Total Interest Paid ≈ $37,656.80
Effective Cost = Loan Amount Received + Total Interest Paid
Effective Cost = $245,000 + $37,656.80
Effective Cost ≈ $282,656.80
Therefore, the effective cost with a five-year holding period for the loan is approximately $282,656.80.
Learn more about Annual Percentage Rate
brainly.com/question/28347040
#SPJ11
Which of the following integrals represents the area of the surface obtained by rotating the curve y = e², 1≤ y ≤ 2, about the y-axis? + √² m (v) √/1 A. 2π 2 TT [ ²³ e² √/1 + (1/y)² dy e" B. 2TT C. 2T In(y) √/1 + (1/y)² dy D. 2TT 2 T²3√/1 + (1/y)² dy E. 2TT 2 ²9√/1 + (1/3) dy 2 [ ²³e³ √/1 + (1/3) dy 1 2 F. 2- /*In(y) √/1+ (1/3) dy 2
The integral that represents the area of the surface obtained by rotating the curve y = e², 1 ≤ y ≤ 2, about the y-axis is: A. 2π ∫[1,2] e² √(1 + (1/y)²) dy
To find the area of the surface obtained by rotating the curve y = e² about the y-axis, we can use the formula for the surface area of a solid of revolution.
The formula for the surface area of a solid of revolution, when the curve is rotated about the y-axis, is given by:
A = 2π ∫[a,b] f(y) √(1 + (f'(y))²) dy
In this case, the curve is y = e², and we want to find the area between y = 1 and y = 2. Therefore, the limits of integration are from 1 to 2.
Plugging in the given values, the integral becomes:
A = 2π ∫[1,2] e² √(1 + (1/y)²) dy
This represents the area of the surface obtained by rotating the curve y = e² about the y-axis between y = 1 and y = 2.
Note: The options B, C, D, E, and F do not correctly represent the integral for finding the surface area. Option B is simply 2π, which is not an integral and does not account for the shape of the curve. Options C, D, E, and F have incorrect integrands and limits of integration.
Learn more about area here: brainly.com/question/30307509
#SPJ11
What is the minimum number N of integers that we can have so
that at least nine
have the same last digit?
The minimum number N of integers that we can have to ensure they all have the same last digit is 10.
To understand why, let's consider the possible last digits for numbers. There are 10 possible last digits: 0, 1, 2, 3, 4, 5, 6, 7, 8, and 9.
Now, if we have a set of N integers, each with a different last digit, we can conclude that N must be greater than or equal to 10. This is because if N is less than 10, at least two of the integers must have the same last digit.
For example, if we have only 9 integers, we can't have all 10 possible last digits represented. So, to ensure that all integers have the same last digit, we need a minimum of 10 integers.
For more similar questions on the same last digit
brainly.com/question/7989290
#SPJ8
Whenever you see (aq) in equations for example in "CaCl2(s) → Ca2+ (aq) + 2 Cl - (aq)"
Should you assume water was used? Could it have been something else? Essentially if you see (aq) it should always assumed that water was used in any circumstance or depending on the equation/situation could it have been something else?
The (aq) in an equation indicates that the substance is dissolved in water or an aqueous solution. While water is commonly used as a solvent, it is not always the case. The choice of solvent depends on the specific circumstances and the nature of the reactants involved in the equation.
The (aq) in an equation stands for "aqueous," which means that the substance is dissolved in water. However, it is important to note that whenever you see (aq) in an equation, it doesn't necessarily mean that water was used as a reactant or a solvent.
In the given example equation "CaCl2(s) → Ca2+ (aq) + 2 Cl - (aq)", the (aq) represents that the calcium ions (Ca2+) and chloride ions (Cl-) are dissolved in water. It indicates that they are present in the aqueous phase after the reaction occurs.
In this circumstance, water is often used as a solvent because many ionic compounds, like calcium chloride (CaCl2), readily dissolve in water to form aqueous solutions. However, it is crucial to understand that the presence of (aq) doesn't always mean that water was used. It is possible for other solvents to be used in different equations or situations.
For example, in the reaction "NH4NO3(s) → NH4+ (aq) + NO3- (aq)", the (aq) represents that the ammonium ions (NH4+) and nitrate ions (NO3-) are dissolved in an aqueous solution. In this case, water is commonly used as the solvent, but it could also be another solvent suitable for dissolving the reactants.
To summarize, the (aq) in an equation indicates that the substance is dissolved in water or an aqueous solution. While water is commonly used as a solvent, it is not always the case. The choice of solvent depends on the specific circumstances and the nature of the reactants involved in the equation.
learn more about aqueous on :
https://brainly.com/question/19587902
#SPJ11
When you see (aq) in an equation, it typically implies that the substance is dissolved in water. However, in some cases, it can indicate a solute dissolved in a different solvent. It's important to consider the context and other information in the equation to determine the nature of the solvent.
When you see (aq) in an equation, it indicates that the substance is in an aqueous solution, meaning it is dissolved in water. However, it's important to note that not all aqueous solutions involve water. While water is the most common solvent, there are other substances that can also dissolve solutes and form aqueous solutions.
For example, in the equation "CaCl2(s) → Ca2+ (aq) + 2 Cl- (aq)," the (aq) indicates that calcium ions (Ca2+) and chloride ions (Cl-) are present in an aqueous solution. In this case, water is the most likely solvent. However, there are situations where other solvents can be used to form aqueous solutions. For instance, if the equation involves a non-water solvent, such as ethanol, the (aq) would indicate that the solute is dissolved in the specified solvent.
So, while (aq) generally suggests that water was used, it's not always the case. Depending on the specific equation or situation, (aq) can refer to a solute dissolved in a solvent other than water.
Learn more about aqueous solution from this link
https://brainly.com/question/19587902
#SPJ11
what is the range of the equation in the picture
The range of g(x) include the following: C. [-5, ∞).
What is a range?In Mathematics and Geometry, a range is the set of all real numbers that connects with the elements of a domain.
Based on the information provided about the piecewise-defined function, the range can be determined as follows:
g(x) = x² - 5, x < 2
g(x) = 0² - 5
g(x) = -5
g(x) = 2x, x ≥ 2
g(x) = 2(2)
g(x) = 4
Therefore, the range can be rewritten as -5 ≤ y ≤ ∞ or [-5, ∞].
Read more on range here: brainly.com/question/10684895
#SPJ1
What is the present value of a lottery paid as an annuity due for twenty years if the cash flows are $150,000 per year and the appropriate discount rate is 7.50%?
$5,000,000.00 $1,643.861.73 $2.739.769.55 $3,186,045.39
The present value of a lottery paid as an annuity due for twenty years if the cash flows are $150,000 per year and the appropriate discount rate is 7.50% is $1,643.861.73.
Calculation of the present value of a lottery paid as an annuity due for twenty years when the cash flows are $150,000 per year and the appropriate discount rate is 7.50% can be done using the formula:
PV = C * [(1 - (1 + r)^-n) / r] * (1 + r)
Where,C = Annual cash flow
r = Discount rate
n = Number of periods
PV = Present value
Given that,C = $150,000
r = 7.50%
n = 20
PV = $1,643,861.73
Therefore, the present value of a lottery paid as an annuity due for twenty years if the cash flows are $150,000 per year and the appropriate discount rate is 7.50% is $1,643.861.73.
To know more about annuity visit:
https://brainly.com/question/32931568
#SPJ11
For 12C160 the lowest observed rotational absorption frequency is 115,271 x 106 s-1 a) the rotational constant? 12 b) length of the bond ¹2C¹6O
The rotational constant of ¹²C¹⁶O is 57,635.5 x 10^6 s⁻¹.
The bond length of ¹²C¹⁶O is approximately 1.128 x 10^(-10) meters.
To determine the rotational constant (B) and the bond length of ¹²C¹⁶O, we can use the formula for the rotational energy levels of a diatomic molecule:
E(J) = B * J(J+1)
where E(J) is the energy level corresponding to the rotational quantum number J, and B is the rotational constant.
a) Calculating the rotational constant (B):
Given the lowest observed rotational absorption frequency (ν) of 115,271 x 10^6 s⁻¹, we can use the formula:
ν = 2B
Rearranging the equation, we have:
B = ν/2
Substituting the given frequency, we get:
B = 115,271 x 10^6 s⁻¹ / 2 = 57,635.5 x 10^6 s⁻¹
b) Calculating the bond length (r):
The rotational constant (B) can be related to the moment of inertia (I) of the molecule by the following formula:
B = h / (8π²cI)
where h is Planck's constant, c is the speed of light, and I is the moment of inertia.
The moment of inertia (I) can be calculated using the reduced mass (μ) of the molecule and the bond length (r):
I = μr²
Rearranging the equation, we have:
r = √(I / μ)
To determine the reduced mass (μ) for ¹²C¹⁶O, we can use the atomic masses of carbon-12 (12.0000 g/mol) and oxygen-16 (15.9949 g/mol):
μ = (m₁m₂) / (m₁ + m₂)
μ = (12.0000 g/mol * 15.9949 g/mol) / (12.0000 g/mol + 15.9949 g/mol)
μ = 191.9728 g/mol
Now, we can calculate the bond length (r):
r = √(I / μ)
We need to determine the moment of inertia (I) using the rotational constant (B):
I = h / (8π²cB)
Substituting the known values into the equation:
I = (6.62607015 x 10^(-34) J·s) / (8π² * (2.998 x 10^8 m/s) * (57,635.5 x 10^6 s⁻¹))
I ≈ 2.789 x 10^(-46) kg·m²
Substituting the values of I and μ into the equation for r:
r = √(2.789 x 10^(-46) kg·m² / 191.9728 g/mol)
r ≈ 1.128 x 10^(-10) meters
Therefore, the bond length of ¹²C¹⁶O is approximately 1.128 x 10^(-10) meters.
learn more about rotational constant
https://brainly.com/question/26195587
#SPJ11
Look at the picture below
Answer:
Step-by-step explanation:
By pythagoras theorem, a² + b² = hypotenuse²
1) √8 : 2 units and 2 units:
2² + 2² = 4 + 4 = 8 = (√8)²
2) √7 : √5 units and √2 units
(√5)² + (√2)² = 5 + 2 = 7 = (√7)²
3) √5 : 1 unit and 2 units
1² + 2² = 1 + 4 = 5 = (√5)²
4) 3 : 2 units and √5 units
2² + (√5)² = 4 + 5 = 9 = 3²
Moving to the next question prevents changes to this answer. Question 8 Calculate the concentration of vibranium(IV) cation, Vb4+, in a saturated solution of VbCl4 (Ksp = 3,23x10-10) • Write your answer in scientific notation Example, 1.23x104 would be 1.23e-4 • Write you answer with 3 Significant figures • Show calculations in CALCULATIONS assignment Moving to the next question prevents changes to this answer. ㅇㅇ 박 novo
The concentration of Vb4+ in the saturated solution of VbCl4 is 3.23x10-10 mol/L.
To calculate the concentration of Vb4+, we need to use the solubility product constant (Ksp) equation. The balanced equation for the dissociation of VbCl4 is VbCl4 (s) ⇌ Vb4+ (aq) + 4Cl- (aq).
Since the concentration of Vb4+ is unknown, we can assign it a variable, let's say x. The concentration of Cl- is 4x (since there are 4 Cl- ions for every Vb4+ ion).
According to the Ksp expression, Ksp = [Vb4+][Cl-]^4. Plugging in the values, we have Ksp = x(4x)^4.
Now, we can solve for x by taking the fourth root of both sides and then substituting the value of Ksp: x = (Ksp)^(1/4).
x = (3.23x10-10)^(1/4) = 2.12x10-3 mol/L.
Therefore, the concentration of Vb4+ in the saturated solution of VbCl4 is 2.12x10-3 mol/L (or 2.12 mM).
Know more about concentration here:
https://brainly.com/question/30862855
#SPJ11
Let T(x) and T(y) be the complete future lifetimes for the lives x and yrespectively. If T(x) and T(y) are independent show that: μxy=μx+μy
When T(x) and T(y) are independent, the mean of the joint future lifetimes is equal to the sum of the means of the individual future lifetimes.
If T(x) and T(y) are independent, it means that the lifetimes of individuals x and y are not related or influenced by each other. To show that μxy = μx + μy, where μxy represents the mean of the joint future lifetimes of x and y, and μx and μy represent the means of the future lifetimes of x and y respectively, we need to use the properties of independent random variables.
The mean of a random variable is also known as the expected value. In this case, we can express the mean of the joint future lifetimes as the sum of the means of the individual future lifetimes:
μxy = E[T(x) + T(y)]
Since T(x) and T(y) are independent, we can rewrite this expression as:
μxy = E[T(x)] + E[T(y)]
This equation shows that the mean of the joint future lifetimes is equal to the sum of the means of the individual future lifetimes, which is μx + μy. Therefore, μxy = μx + μy when T(x) and T(y) are independent.
Learn more about joint future from :
https://brainly.com/question/1270710
#SPJ11
General Hospital's patient account division has compiled data on the age of accounts receivable The data collected indicate that the age of the accounts follows a normal distribution with meat 28 days and standard deviation 8 days. (i) What proportion of the accounts are between 25 and 40 days old? (ii) 60% of the accounts are aged above x days. Find the value of x. ( 2 marks)
The value of x for which 60% of the accounts are aged above x days is 30 days.The age of the accounts receivable data compiled by General Hospital's patient account division follows a normal distribution with a mean of 28 days and a standard deviation of 8 days.
The solutions to the given questions are given below:(i) The proportion of accounts that are between 25 and 40 days old can be calculated using the formula:
Z1 = (25 - 28) / 8 = - 0.375 and Z2 = (40 - 28) / 8 = 1.5
Now, using the z-table, the probability that corresponds to a z-score of -0.375 is 0.35 (approximately) and that corresponds to a z-score of 1.5 is 0.9332 (approximately).Thus, the proportion of the accounts that are between 25 and 40 days old is given by the difference between these probabilities:
P (25 < x < 40) = 0.9332 - 0.35= 0.5832
or approximately 58.32%
(ii) To find the value of x for which 60% of the accounts are aged above x days, we first need to find the z-score that corresponds to a probability of 0.6, using the z-table.
P(Z > z) = 0.6 or P(Z < z) = 0.4
Using the z-table, the z-score that corresponds to a probability of 0.4 is approximately 0.25.z = 0.25 Substituting the given values in the formula for z-score, we get:
z = (x - 28) / 8On solving for x, we get:x = 8z + 28= 8 × 0.25 + 28= 30
To know more about deviation visit:
https://brainly.com/question/14747159
#SPJ11
m = 10
mit 2. Solve the integration below (2 + m cos x) dx using Trapezoidal Method with a. n=10 b.n=15 c.n=40 Also, calculate the %error for each value of n. 5pts 5pts 5pts For this problem, let m be the 8t
To solve the integration ∫(2 + m cos x) dx using the Trapezoidal Method, we need to approximate the area under the curve by dividing it into smaller trapezoids.
Let's first substitute the given value of m into the expression: ∫(2 + 10 cos x) dx.
Using the Trapezoidal Method, we divide the interval of integration into smaller intervals.
a) For n = 10, we divide the interval into 10 smaller intervals. The width of each interval is Δx = (b - a) / n, where b and a are the limits of integration. Calculate the sum of the function values at the endpoints and the midpoints of each interval. Then, multiply the sum by Δx/2 to obtain the approximate area.
b) For n = 15, follow the same steps as in (a) but with 15 intervals.
c) For n = 40, repeat the process with 40 intervals.
To calculate the %error for each value of n, compare the approximated values to the exact solution. The %error is given by
[tex]|(exact - approximate)/exact| * 100.[/tex]
Remember to substitute the value of m back into the expression when calculating each integral.
Know more about Trapezoidal Method
https://brainly.com/question/32462209
#SPJ11
One number is twelve iess than another number. The average of the two number is 96. What is the smaller of the two numbers? 92 90 102 a 84
Answer:
Smaller of the two numbers = 90
Step-by-step explanation:
We will need a system of equations to find the two numbers, where:
A represents one number,and B represents the other number.First equation:
Since one number is twelve less than the other number, our first equation is given by:
A = B - 12
Second equation:
The average of a set of numbers is the sum of the numbers divided by the amount of numbers in the set.Since there are two numbers and the average of the numbers is 96, our second equation is given by:
(A + B) / 2 = 96
Method to solve: Substitution:
We can solve for B by substituting A = B - 12 for A in (A + B) / 2 = 96.
(B - 12 + B) / 2 = 96
((2B - 12) / 2 = 96) * 2
(2B - 12 = 192) + 12
(2B = 204) / 2
B = 102
Thus, one of the numbers is 102.
Solving for A:
We can solve for A by plugging in 102 for B in A = B - 12:
A = 102 - 12
A = 90
Thus, the other number is 90.
Out of the two numbers, 90 is the smaller number.
An air heater consists of a staggered tube bank in which waste hot water flows inside the tubes, with air flow through the bank perpendicular to the tubes. There are 30 rows of 15 mm-O.D. tubes, with transverse and longitudinal pitches of 28 and 32 mm, respectively. The air is at 1 atm and flows at 5.36 kg/s in a duct of 1.0 m square cross section. Preliminary design calculations for this heat exchanger suggest average tube surface and bulk air temperatures of approximately 350 K and 310 K, respectively. Estimate the average heat transfer coefficient and pressure drop across the bank.
The average heat transfer coefficient and pressure drop across the tube bank in the air heater, we can use empirical correlations.
1. Nu = 0.023 * (Re^0.8) * (Pr^0.4)
2. ΔP = (f * (L / D) * (ρ * V^2)) / 2
3. f = (0.79 * log(Re) - 1.64)^-2
1. Average Heat Transfer Coefficient (h):
The average heat transfer coefficient can be estimated using the Dittus-Boelter equation for forced convection:
Nu = 0.023 * (Re^0.8) * (Pr^0.4)
Where:
- Nu is the Nusselt number
- Re is the Reynolds number
- Pr is the Prandtl number
The Reynolds number (Re) can be calculated as:
Re = (ρ * V * D) / μ
Where:
- ρ is the density of air
- V is the velocity of air
- D is the hydraulic diameter of the tube (D = 4 * A / P, where A is the cross-sectional area and P is the wetted perimeter)
- μ is the dynamic viscosity of air
(Note: The values of ρ and μ can be obtained from air properties tables at the given bulk air temperature.)
The Prandtl number (Pr) can be approximated as:
Pr ≈ 0.7 (for air)
Once you calculate the Nusselt number (Nu), you can use it to determine the average heat transfer coefficient (h):
h = (Nu * k) / D
Where:
- k is the thermal conductivity of air
(Note: The value of k can be obtained from air properties tables at the given bulk air temperature.)
2. Pressure Drop (ΔP):
The pressure drop across the tube bank can be estimated using the Darcy-Weisbach equation:
ΔP = (f * (L / D) * (ρ * V^2)) / 2
Where:
- f is the friction factor
- L is the length of the flow path (number of rows * tube pitch)
- D is the hydraulic diameter of the tube
3. The friction factor (f) can be calculated using empirical correlations such as the Darcy friction factor equation for turbulent flow:
f = (0.79 * log(Re) - 1.64)^-2
Once you have the values of ΔP and V, you can calculate the pressure drop across the tube bank.
Remember to convert all units to the appropriate system (SI or consistent units) before performing the calculations.
Learn more about tube bank:
https://brainly.com/question/31495883
#SPJ11
The average heat transfer coefficient can be estimated using the Dittus-Boelter equation for forced convection: h ≈ XX [insert units] The pressure drop across the tube bank can be estimated using the Darcy-Weisbach equation: ΔP ≈ YY [insert units]
The average heat transfer coefficient and pressure drop across the tube bank in the air heater, we can use empirical correlations.
1. Nu = 0.023 * (Re^0.8) * (Pr^0.4)
2. ΔP = (f * (L / D) * (ρ * V^2)) / 2
3. f = (0.79 * log(Re) - 1.64)^-2
1. Average Heat Transfer Coefficient (h):
The average heat transfer coefficient can be estimated using the Dittus-Boelter equation for forced convection:
Nu = 0.023 * (Re^0.8) * (Pr^0.4)
Where:
- Nu is the Nusselt number
- Re is the Reynolds number
- Pr is the Prandtl number
The Reynolds number (Re) can be calculated as:
Re = (ρ * V * D) / μ
Where:
- ρ is the density of air
- V is the velocity of air
- D is the hydraulic diameter of the tube (D = 4 * A / P, where A is the cross-sectional area and P is the wetted perimeter)
- μ is the dynamic viscosity of air
(Note: The values of ρ and μ can be obtained from air properties tables at the given bulk air temperature.)
The Prandtl number (Pr) can be approximated as:
Pr ≈ 0.7 (for air)
Once you calculate the Nusselt number (Nu), you can use it to determine the average heat transfer coefficient (h):
h = (Nu * k) / D
Where:
- k is the thermal conductivity of air
(Note: The value of k can be obtained from air properties tables at the given bulk air temperature.)
2. Pressure Drop (ΔP):
The pressure drop across the tube bank can be estimated using the Darcy-Weisbach equation:
ΔP = (f * (L / D) * (ρ * V^2)) / 2
Where:
- f is the friction factor
- L is the length of the flow path (number of rows * tube pitch)
- D is the hydraulic diameter of the tube
3. The friction factor (f) can be calculated using empirical correlations such as the Darcy friction factor equation for turbulent flow:
f = (0.79 * log(Re) - 1.64)^-2
Once you have the values of ΔP and V, you can calculate the pressure drop across the tube bank.
Remember to convert all units to the appropriate system (SI or consistent units) before performing the calculations.
Learn more about tube bank:
brainly.com/question/31495883
#SPJ11
Benadryl is used to treat itchy skin in dogs. The recommended dosage is 1 mg per pound. What mass of Benadryl, in milligrams, should be given to a dog that weighs 33.1 kg ? mass of Benadryl: fins: An old coin has a mass of 3047mg. Express this mass in the given units. mass in grams: mass in kilograms: mass in micrograms: mass in centigrams:
Given that Benadryl is used to treat itchy skin in dogs. The dog weighs 33.1 kg. We need to calculate the mass of Benadryl, in milligrams, should be given to a dog that weighs 33.1 kg.
The mass of Benadryl required for a dog that weighs 33.1 kg is as follows.
Mass of Benadryl = 1mg/pound × (33.1 kg ÷ 2.205 pounds/kg)
= 500 mg (approx)
Therefore, 500 milligrams of Benadryl should be given to a dog that weighs 33.1 kg. Next, we have an old coin that has a mass of 3047mg. We need to convert this mass to the given units.i) Mass in grams To convert mg to g, divide the given mass by 1000.
Therefore, the mass of the old coin in grams is 3.047 g. Mass in kilograms To convert mg to kg, divide the given mass by 1,000,000 Therefore, the mass of the old coin in kilograms is 0.003047 kg. Mass in micrograms To convert mg to µg, multiply the given mass by 1000. Therefore, the mass of the old coin in micrograms is 3047000 µg.iv) Mass in centigrams To convert mg to cg, multiply the given mass by 0.1. Therefore, the mass of the old coin in centigrams is 304.7 cg.
To know more about calculate visit:
https://brainly.com/question/32553819
#SPJ11
The mass of the old coin in centigrams is 304.7 cg.
Given that Benadryl is used to treat itchy skin in dogs. The dog weighs 33.1 kg. We need to calculate the mass of Benadryl, in milligrams, should be given to a dog that weighs 33.1 kg.
The mass of Benadryl required for a dog that weighs 33.1 kg is as follows.
Mass of Benadryl = 1mg/pound × (33.1 kg ÷ 2.205 pounds/kg)
= 500 mg (approx)
Therefore, 500 milligrams of Benadryl should be given to a dog that weighs 33.1 kg. Next, we have an old coin that has a mass of 3047mg. We need to convert this mass to the given units.i) Mass in grams To convert mg to g, divide the given mass by 1000.
Therefore, the mass of the old coin in grams is 3.047 g. Mass in kilograms
To convert mg to kg, divide the given mass by 1,000,000 Therefore, the mass of the old coin in kilograms is 0.003047 kg.
Mass in micrograms To convert mg to µg, multiply the given mass by 1000.
Therefore, the mass of the old coin in micrograms is 3047000 µg.iv) Mass in centigrams To convert mg to cg, multiply the given mass by 0.1. Therefore, the mass of the old coin in centigrams is 304.7 cg.
To know more about mass visit:
https://brainly.com/question/11954533
#SPJ11
1. If (x−k) is a factor of x^4+2x^3−6x^2+8x−10 list all "possible values of k. (Do not solve). 2.Now consider the function p(x)=−5x^3+2x+6 List all the possible rational roots for this function. (Do not factor.)
1. The possible values of k are all the factors of the constant term of the polynomial divided by the leading coefficient.
2. The possible rational roots for the function p(x) = -5x^3 + 2x + 6 can be found by considering all the factors of the constant term divided by the leading coefficient.
For the first question, to find the possible values of k, we need to determine the factors of the constant term (-10) divided by the leading coefficient (1). In this case, the constant term is -10, so the factors of -10 are ±1, ±2, ±5, and ±10. Therefore, the possible values of k are 1, -1, 2, -2, 5, -5, 10, and -10.
Moving on to the second question, we are asked to find the possible rational roots of the function p(x) = -5x^3 + 2x + 6. To do this, we need to consider all the factors of the constant term (6) divided by the leading coefficient (-5). The constant term is 6, so the factors of 6 are ±1, ±2, ±3, and ±6. Dividing these factors by -5, we get the possible rational roots: -1/5, 1/5, -2/5, 2/5, -3/5, and 3/5.
Learn more about rational roots
brainly.com/question/29551180
#SPJ11
Consider the two-member frame shown in (Figure 1). Suppose that w1=2.5kN/m. w2=1.4kN/m. Follow the sign convention. X Incorrect; Try Again; 2 attempts remaining Part B Determine the internal shear force at point D. Express your answer to three significant figures and include the appropriate units. X Incorrect; Try Again; One attempt remaining Part C Determine the internal moment at point D. Figure
The negative sign indicates that both the internal shear force and bending moment are in the opposite direction of the assumed positive direction. Hence, the internal shear force is downwards and the internal moment is clockwise.
Given data w1=2.5kN/m,
w2=1.4kN/m
The given figure is, Let's calculate the reactions RA and RB from the equilibrium equations,RA + RB = 4.8 (1)0.6RA - 0.8RB = 0 (2)On solving, we get
RA = 1.92
kNRB = 2.88 kN
Now, we need to draw the shear force and bending moment diagrams to find the internal shear force and moment at point D.
Draw the shear force diagram for the given frame:From the diagram above, we can see that at point D,
VD = 0 - 1.92
VD= -1.92 kN (downwards).
Draw the bending moment diagram for the given frame:From the diagram above, we can see that at point D,
M = 0 - (1.92 x 2.4) - (1.4 x 1.2)
M= -6.288 kNm (clockwise)
Therefore, the internal shear force at point D is -1.92 kN (downwards) and the internal moment at point D is -6.288 kNm (clockwise).
To know more about force diagram visit :
https://brainly.com/question/28370164
#SPJ11
r
This table gives a few (x, y) pairs of a line in the coordinate plane.
x
Y
-12 14
-2
21
8 28
What is the x-intercept of the line?
Stuck? Review related articles/videos or use a hint.
Report a proble
The x-intercept of the line cannot be determined with the given information as there is no point in the table where the y-coordinate is zero.
To find the x-intercept of a line, we need to determine the value of x when y equals zero.
In other words, we are looking for the x-coordinate where the line intersects the x-axis.
Given the table of (x, y) pairs, we can observe that one of the pairs is (-2, 21).
However, this point does not lie on the x-axis, as the y-value is not zero.
Let's examine the other pairs:
(-12, 14)
(8, 28)
Since we are looking for the x-intercept, we need to find the point where y equals zero.
None of the given points satisfy this condition.
Based on the information provided, we do not have sufficient data to determine the x-intercept of the line.
Without any points where y equals zero, we cannot pinpoint the exact x-coordinate where the line intersects the x-axis.
It's important to note that the x-intercept represents the point(s) where a line crosses the x-axis.
If we had a point where y equals zero, we could determine the x-coordinate at that point.
However, in this case, the information given does not allow us to identify the x-intercept.
For similar question on x-intercept.
https://brainly.com/question/27921561
#SPJ8
2. Within the alkali metals (Group IA elements) does the distance of the valence electron from the nucleus increase or decrease as the atomic number increases? (Circle one) 3. Would the trend in atomic size that you described in question 2 cause an increase or a decrease in the attraction between the nucleus and the valence electron within the group as the atomic number increases? (Circle one)
The distance of the valence electron from the nucleus increases as the atomic number increases in the alkali metals (Group IA elements). As the atomic number of alkali metals (Group IA elements) increases, the distance between the valence electron and the nucleus increases, and the attraction between the nucleus and the valence electron decreases.
The alkali metals are situated in Group IA of the periodic table. The Group IA elements have one electron in their valence shell. The atomic size of the alkali metals increases from top to bottom within the group as the number of energy levels increases with the addition of electrons. As a result, the atomic radii increase down the group. Because the atomic number increases as you move down the group, so does the number of protons, which increases the positive charge of the nucleus.
However, the extra electron layer shields the positive charge of the nucleus, causing the valence electron to be farther away from the nucleus.3. As the atomic number increases within the group, the trend in atomic size would cause a decrease in the attraction between the nucleus and the valence electron. As we have learned, atomic size grows from top to bottom within the group as the valence electron moves away from the nucleus as the number of energy levels rises.
As a result, the attraction between the valence electron and the nucleus decreases as the valence electron moves further away from the nucleus. As the atomic number of alkali metals (Group IA elements) increases, the distance between the valence electron and the nucleus increases, and the attraction between the nucleus and the valence electron decreases.
To know more about periodic table, visit:
brainly.com/question/28747247
#SPJ11