20) Calculate the average rate of change of f(x) = −x² + 3x - 6 on the interval [1, 3].

The ratio between the perimeter of triangle ABC and the perimeter of triangle XYZ is given as follows:

1/3.

The perimeter of a triangle is the total length of its three sides. To find the perimeter of a triangle, you need to add up the lengths of all three sides.

The ratio between the side lengths of triangle ABC and triangle XYZ is given as follows:

5/15 = 1/3.

The perimeter of a triangle is measured in units, as area the side lengths, hence they have the same ratio, and thus the ratio between the perimeter of triangle ABC and the perimeter of triangle XYZ is given as follows:

1/3.

More can be learned about the perimeter of a triangle at https://brainly.com/question/24382052

#SPJ1

The corresponding point on the graph is (9, 21). This point is within the normal respiratory rate region, which is defined by the system of linear inequalities. Therefore, model breakdown has not occurred.

The given problem involves the normal respiratory rates of children aged 3 to 15 years. The respiratory rate, measured in breaths per minute, is represented as a function of age using a system of linear inequalities. The graph depicts a normal respiratory rate region that models the respiratory rate ranges shown in the table. The problem requires us to identify a specific point on the graph that corresponds to a respiratory rate of 21 breaths per minute for a 9-year-old child. The ordered pair (9, 21) represents the corresponding point on the graph.

Further, we need to determine if this point lies within the normal respiratory rate region or if model breakdown has occurred. The system of linear inequalities defines the normal respiratory rate region, and we can determine if the point (9, 21) satisfies these inequalities. In this case, the point (9, 21) lies within the normal respiratory rate region and satisfies the system of linear inequalities. Therefore, model breakdown has not occurred, and the given model is an appropriate approximation of the normal respiratory rate region for children aged 3 to 15.

To learn more about inequalities please click on below link        

https://brainly.com/question/20383699

#SPJ1

The measurement of the side EF in ΔDEF is 13 units.

Tο determine the area οf a triangle, use the fοrmula area = 1/2 * base * height. Determine the height οf the triangle frοm a base side. Then enter the base and height measurements intο the fοrmula.

Because the twο in the figure are similar, we can set up an equatiοn and sοlve fοr the unknοwn value οf x using the prοpοrtiοnality οf cοrrespοnding sides:

As ΔDEF ≅ ΔJHI

Then EF ≅ IH

3x - 2 = x + 8

3x - x = 8 + 2

2x = 10

x = 10/5

x = 5

EF = x + 8

= 5 + 8

= 13

Thus, The measurement of the side EF in ΔDEF is 13 units.

To know more about Triangle visit:

brainly.com/question/15835181

#SPJ1

The probability that John's drive to work will take between 36 and 40 minutes is 0.3413.

Probability is the measure of how likely an event is to occur. It is expressed as a number between 0 and 1, where 0 indicates that the event is impossible and 1 indicates that the event is certain to occur. Probability is used in many areas of life, such as gambling, finance, and science. It is also used to make decisions in everyday life, such as estimating the likelihood of rain or the chance of winning a bet.

Using the normal distribution, the probability of John's drive taking between 36 and 40 minutes can be calculated using the standard normal distribution table. The formula for calculating the probability is: P(x<X<y) = P(y) - P(x).

For the given problem, the lower boundary is 36 minutes and the upper boundary is 40 minutes. Using the standard normal distribution table, the probability of John's drive taking between 36 and 40 minutes can be calculated by subtracting the probability of 36 minutes from the probability of 40 minutes. This gives us a probability of 0.3413.

Therefore, the probability that John's drive to work will take between 36 and 40 minutes is 0.3413.

To know more about probability click-
https://brainly.com/question/24756209
#SPJ1

The probability that John's drive to work will take between 36 and 40 minutes is 0.3829.

Probability is the measure of how likely an event is to occur. It is expressed as a number between 0 and 1, where 0 indicates that the event is impossible and 1 indicates that the event is certain to occur. Probability is used in many areas of life, such as gambling, finance, and science. It is also used to make decisions in everyday life, such as estimating the likelihood of rain or the chance of winning a bet.

The probability that John's drive to work will take between 36 and 40 minutes can be calculated using a normal distribution table. The mean of the distribution is µ = 38 minutes, and the standard deviation is σ = 5 minutes.

To calculate the probability, we need to convert the given range (36 minutes to 40 minutes) into standard normal scores. This is done by subtracting the mean (µ = 38 minutes) from the lower bound (36 minutes) and then dividing by the standard deviation (σ = 5 minutes). The result is a standard normal score of -0.4. The same calculation is carried out for the upper bound (40 minutes) and the result is a standard normal score of 0.4.

Using a normal distribution table, we can then determine the probability that John's drive to work will take between 36 and 40 minutes. This probability is equal to the area under the normal curve between the two standard normal scores of -0.4 and 0.4. The result is a probability of 0.3829.

Therefore, the probability that John's drive to work will take between 36 and 40 minutes is 0.3829.

To know more about probability click-
brainly.com/question/24756209
#SPJ1

Answer: the ratio of males who would buy the drink to females who would buy the drink is approximately 0.6560.

Step-by-step explanation:

Let's assume that there are 100 people in the focus group. Then, the number of males in the focus group is 47 and the number of females is 53.

Out of 47 males, 40% said they would buy the fruit drink, which is 0.4 x 47 = 18.8 males (rounded to the nearest whole number). Out of 53 females, 54% said they would buy the fruit drink, which is 0.54 x 53 = 28.62 females (rounded to the nearest whole number).

The ratio of males who would buy the drink to females who would buy the drink is:

18.8/28.62 = 0.6560 (rounded to the nearest ten-thousandth)

Therefore, the ratio of males who would buy the drink to females who would buy the drink is approximately 0.6560.

Answer:

137.4%

Step-by-step explanation:

Answer:

x is first angle

y is second angle

and z is third angle

Step-by-step explanation:

This question is solved by a system of equations. We have that:x is the first angle.y is the second angle.z is the third angle.Doing this, we get that:The first angle measures 30º.The second angle measures 67º.The third angle measures 83º.The sum of the measures of the angles of a triangle is 180. This means that The sum of the measures of the second and third angles is five times the measure of the first angle.This means that:From this, the first angle can be found:The measure of the first angle is of 30º.The third angle is 16 more than the second.This means that:Since We get that the second angle is:The second angle measures 67º.For the third angle:The third angle measures 83º.

Answer:

copy paste it on gool then you will find the same thing but it has it done

Step-by-step explanation:

Let the width of the rectangle be "X". Then the length of the rectangle will be (X-9).

Formula to find the area of a rectangle is given by-

[tex] \small \underline{ \boxed{ \sf{ \pmb{Area_{(rectangle)} = Length\times Width }}}}\\[/tex]

On substituting the values-

[tex] \:\:\:\:\:\:\longrightarrow \sf {Area_{(rectangle)} = X \times \bigg(X-9\bigg)}\\[/tex]

[tex] \:\:\:\:\:\:\longrightarrow \sf {90 = X^2 -9X}\\[/tex]

[tex] \:\:\:\:\:\:\longrightarrow \sf {X^2-9X =90}\\[/tex]

[tex] \:\:\:\:\:\:\longrightarrow \sf {X^2-9X -90=0}\\[/tex]

[tex] \:\:\:\:\:\:\longrightarrow \sf {X^2-15X+6X -90=0}\\[/tex]

[tex] \:\:\:\:\:\:\longrightarrow \sf {X\bigg(X-15\bigg) +6\times \bigg(X-15\bigg)=0}\\[/tex]

[tex] \:\:\:\:\:\:\longrightarrow \sf {\bigg(X-15\bigg) \times \bigg(X+6\bigg) =0}\\[/tex]

[tex] \:\:\:\:\:\:\longrightarrow \boxed{ \tt{ \pmb{ \red{X = 15\: Or,\: -6}}}}\\[/tex]

Since,width cannot be (Negative) , so the width will be 15cm.And the length will be (X-9)= (15-9)=6cm.

The area of Jade's rectangular wall is equal to 11⅓ yd² expressed as a mixed fraction

Given the formula for calculating area of rectangle as A = bh

b = 4¼ yd

h = 2⅔

so we can calculate the area of the rectangular wall as follows:

4¼ yd × 2⅔ yd

expressing the values of b and h as improper fractions;

17/4 yd × 8/3 yd

by simplification;

34/3 yd²

34/3 expressed as a mixed number is 11⅓.

Therefore, the area of Jade's rectangular wall is equal to 11⅓ yd² expressed as a mixed fraction.

Know more about rectangular area here:https://brainly.com/question/25292087

#SPJ1

Answer:

Orlando and Nancy will be at an elevation of -110 when they are at the same elevation.

Step-by-step explanation:

We can set up an equation to find the time it takes for Orlando and Nancy to be at the same elevation

We will use the variable T to represent the time in minutes

Orlando's elevation : -60 + 8t

Nancy's elevation : -35 + 12t

We will solve for t to see at what time the elevations were equal

-60 + 8t = -35 + 12t

-60 + 35 = 12t - 8t

-25 = 4t

4t = -25

t = -6.25

This means that both will be at the same elevation 6.25 minutes before Orlando goes down

To find the elevation they will be at that time, we will plug -6.25 into either expression.

-60 + 8t = -60 + 8(-6.25) = -110

Orlando and Nancy will be at an elevation of -110 when they are at the same elevation.

Answer:

Step-by-step explanation:

To find the inventory turnover for Roselli's Machine Manufacturing Co, we need to use the formula:

Inventory turnover = Cost of goods sold / Average inventory

First, we need to find the cost of goods sold (COGS):

COGS = Sales - Gross profit

COGS = R120 000 - R50 000

COGS = R70 000

Next, we need to find the average inventory. We can use the quick ratio formula to find the current assets:

Quick ratio = (Current assets - Inventory) / Current liabilities

Rearranging the formula to solve for inventory, we get:

Inventory = Current assets - (Quick ratio x Current liabilities)

Plugging in the values we know, we get:

1.75 = (Current assets - Inventory) / R25 000

Current assets - Inventory = 1.75 x R25 000

Current assets - Inventory = R43 750

Inventory = Current assets - R43 750

Since the current ratio is 2.5, we know that:

Current assets / Current liabilities = 2.5

Solving for current assets, we get:

Current assets = 2.5 x R25 000

Current assets = R62 500

Substituting the values we found for inventory and COGS into the inventory turnover formula, we get:

Inventory turnover = COGS / Average inventory

Inventory turnover = R70 000 / [(R62 500 - R43 750) / 2]

Inventory turnover = R70 000 / (R18 750 / 2)

Inventory turnover = R70 000 / R9 375

Inventory turnover = 7.47

Therefore, the inventory turnover for Roselli's Machine Manufacturing Co is 7.47.

the pressure at a depth of 66 ft is 197,580 Pa, and the volume of the tank at this depth is 0.000505 L.

To find the pressure at a depth of 66 ft in a liquid, we can use the formula:

pressure = density x gravity x depth

Assuming the liquid in the tank is water, the density is 1000 kg/m³, and gravity is 9.81 m/s².

First, we need to convert 66 ft to meters:

66 ft x 0.3048 m/ft = 20.1168 m

Then, we can find the pressure at this depth:

pressure = 1000 kg/m³ x 9.81 m/s² x 20.1168 m = 197,580 Pa

To find the volume of the tank at this depth, we can use Boyle's Law, which states that the pressure and volume of a gas are inversely proportional at a constant temperature:

P₁V₁ = P₂V₂

where P₁ and V₁ are the initial pressure and volume (1 atm and 10 L, respectively), and P₂ and V₂ are the final pressure and volume.

We can rearrange this equation to solve for V₂:

V₂ = (P₁ x V₁) / P₂

Substituting the values, we get:

V₂ = (1 atm x 10 L) / (197,580 Pa / 1 atm) = 0.000505 L

To know more about Pressure, click here,

https://brainly.com/question/29258039

#SPJ1

Given:-

To find:-

Answer:-

Here since the given triangle is a right angled triangle, we may use the trigonometric ratios . We can see that perpendicular and base are involved in this question whose measures are "x" and "√10" respectively with respect to 60° angle. So here we may use the ratio of tangent as , in any right angled triangle,

[tex]\implies\tan\theta =\dfrac{p}{b} \\[/tex]

and here p = x , and b = √10 . So on substituting the respective values, we have;

[tex]\implies \tan\theta = \dfrac{x}{\sqrt{10}} \\[/tex]

Also the angle here is 60° , so that;

[tex]\implies\tan60^o =\dfrac{x}{\sqrt10} \\[/tex]

The value tan60° is √3 , so we have;

[tex]\implies \sqrt3 =\dfrac{x}{\sqrt10}\\[/tex]

[tex]\implies x =\sqrt{10}\cdot \sqrt{3}\\[/tex]

[tex]\implies x =\sqrt{10\cdot 3} \\[/tex]

[tex]\implies x =\sqrt{30} \\[/tex]

The value of √30 is approximately 5.48 , so that;

[tex]\implies \underline{\underline{\red{\quad x = 5.48\quad }}} \\[/tex]

Therefore the value of x is approximately 5.48 .

Answer:

The length of side x in simplest radical form is [tex]\sqrt{30}[/tex].

Step-by-step explanation:

From inspection of the given right triangle, we can see that the interior angles are 30°, 60° and 90°. Therefore, this triangle is a 30-60-90 triangle.

A 30-60-90 triangle is a special right triangle where the measures of its sides are in the ratio  1 : √3 : 2.  Therefore, the formula for the ratio of the sides is b: b√3 : 2b where:

We have been given the side opposite the 30° angle, so:

[tex]\implies b=\sqrt{10}[/tex]

The side labelled "x" is the side opposite the 60° angle, so:

[tex]\implies x=b\sqrt{3}[/tex]

Substitute the found value of b into the equation for x:

[tex]\implies x=\sqrt{10}\sqrt{3}[/tex]

[tex]\textsf{Apply the radical rule:} \quad \sqrt{a}\sqrt{b}=\sqrt{ab}[/tex]

[tex]\implies x=\sqrt{10 \cdot3}[/tex]

[tex]\implies x=\sqrt{30}[/tex]

Therefore, the length of side x in simplest radical form is [tex]\sqrt{30}[/tex].

[tex]\hrulefill[/tex]

We can also calculate the length of side x using the tangent trigonometric ratio:

[tex]\boxed{\tan \theta=\sf \dfrac{O}{A}}[/tex]

where:

From inspection of the given right triangle:

Substitute these values into the formula:

[tex]\implies \tan 30^{\circ}=\dfrac{\sqrt{10}}{x}[/tex]

[tex]\implies \dfrac{\sqrt{3}}{3}=\dfrac{\sqrt{10}}{x}[/tex]

[tex]\implies x\sqrt{3}=3\sqrt{10}[/tex]

[tex]\implies x=\dfrac{3\sqrt{10}}{\sqrt{3}}[/tex]

Rationalise the denominator by multiplying the numerator and denominator by √3:

[tex]\implies x=\dfrac{3\sqrt{10}}{\sqrt{3}}\cdot \dfrac{\sqrt{3}}{\sqrt{3}}[/tex]

[tex]\implies x=\dfrac{3\sqrt{10}\sqrt{3}}{3}[/tex]

[tex]\implies x=\sqrt{10}\sqrt{3}[/tex]

[tex]\implies x=\sqrt{10\cdot3}[/tex]

[tex]\implies x=\sqrt{30}[/tex]

Therefore, the length of side x in simplest radical form is [tex]\sqrt{30}[/tex].

Answer:

if r is 7 then the answer is -5

if r is 7 then the answer is -5Step-by-step explanation:

if r is 7 then the answer is -5Step-by-step explanation:r-7=-5 because r is =to 7 so if you subtract 12 from 7 the answer you will get is -5

Drawing a square  is NOT a use of the perpendicular bisector.

What does perpendicular bisector mean?

A line that bisects another line segment into two equal-sized segments by crossing it perpendicularly might be said to be a perpendicular bisector. The midpoint of a line segment is traversed by a perpendicular bisector. A ruler and a compass are needed to build it. The line segment that is being divided is bisected at an angle of 90° on both sides.

What use serve perpendicular bisectors?

A line that cuts through the junction of two adjacent line segments at a right angle is known as a perpendicular bisector. With this in mind, we may state that a perpendicular bisector always splits a line segment in its middle. The word "bisect" itself refers to an even or uniform division.

Learn more about perpendicular bisector

brainly.com/question/24753075

#SPJ1

We want to write it in slope-intercept form:

y = mx + (b' = -12m - 2).

The slope of parallel lines is the same. The slopes of perpendicular lines are opposite reciprocals. To put it another way, if m=ab, then m=ba. To find the equation of a line, first determine the slope using the given information.

We can use the fact that parallel lines have the same slope to find the equation of a line that is parallel to a given line and passes through a given point.

Assume that the given line has the equation y = mx + b, where m represents the slope and b represents the y-intercept.

The slope of the line we are looking for is m because it is parallel to the given line. Because we don't know what the y-intercept of this line is, let's call it b'.

We now have two pieces of information regarding the new line:

It has the same slope as the given line (m).

It runs through the point (12,-2).

We can use this data to calculate the equation of the new line:

To begin, we can use the point-slope form of a line equation:

y - y1 = m(x - x1) (x - x1)

(x1, y1) denotes the point (12,-2) and m denotes the slope of the given line.

Substituting known values:

y - (-2) = m(x - 12) (x - 12)

Simplifying:

y + 2 = mx - 12m

We must now calculate the value of b' that makes this equation true for any point on the line. Because b' is the line's y-intercept, we can set x = 0 and solve for y:

y + 2 = m(0) - 12m

y = -12m - 2

As a result, the equation of the line parallel to the given line and passing through the point (12,-2) is:

y = mx - 12m - 2

Alternatively, we can write it in slope-intercept form:

y = mx + (b' = -12m - 2).

To know more about equation of parallel visit:

brainly.com/question/29774095

#SPJ1

Where m is the distance from A to P and n is the distance from P to B.

Length is a measure of distance or size. It is the measurement of the longest dimension of an object, such as a line, segment, or plane. It is commonly used to measure the physical size of objects, as well as the space between them. Length can be measured in many different units, such as meters, feet, or inches. Length is also used to measure the amount of time it takes for something to occur, such as the length of a movie or a song.
Therefore, if the coordinates of A are (x1, y1) and the coordinates of B are (x2, y2), the x- and y- coordinates of point P would be:

x= [2/3(x2 -x1) +x1
y = [2/3](y2 - y1) +y1

This equation can be used to calculate the coordinates of any point P on a directed line segment from A to B such that P is a fraction of the length of the line segment from A to B. By setting the fraction equal to 2/3, we can calculate the coordinates of point P that is 2/3 the length of the line segment from A to B. This can be useful in a variety of applications, such as computer graphics, game design, and engineering. For example, this equation could be used to calculate the coordinates of a point on a line segment that is an exact distance from the two endpoints, or to calculate the coordinates of a point that is a certain percentage of the distance between the two endpoints.

To know more about length click-
https://brainly.com/question/25292087
#SPJ1

The coordinates of point P such that it is 2/3 the length of the line segment from A to B are (4, -2). Therefore, the correct option is d-(3,-2).

Length is a measure of distance or size. It is the measurement of the longest dimension of an object, such as a line, segment, or plane. It is commonly used to measure the physical size of objects, as well as the space between them. Length can be measured in many different units, such as meters, feet, or inches.

Given the coordinates of the points A, B and P, we can calculate the x- and y- coordinates of point P such that it is 2/3 the length of the line segment from A to B.
To do this, we need to use the following formula: x = [m/m+n](x2 -x1) +x1, y = [m/m+n](y2 - y1) +y1, where m is 2/3, n is 1/3, x1 and y1 are the x- and y-coordinates of point A, and x2 and y2 are the x- and y-coordinates of point B.
In this case, m = 2/3, n = 1/3, x1 = 2, y1 = -1, x2 = 4, y2 = -3.
Therefore, plugging these values into the formula we get:
x = [2/3](4 -2) +2 = 4
y = [2/3](-3 - (-1)) + (-1) = -2
Therefore, the coordinates of point P such that it is 2/3 the length of the line segment from A to B are (4, -2). Therefore, the correct option is d-(3,-2).

To know more about length click-
brainly.com/question/25292087
#SPJ1

Answer:

Step-by-step explanation:

$8,500 -7.0%= $7,905

$8,500 - $7,905 = $595

The sum of x and 2 is equal to x + 2.

Value in math is the numerical representation of a quantity or expression. It can also be defined as an amount or a numerical representation of a quantity that is assigned to a variable or a constant in a mathematical expression. Value can be expressed in various forms, such as decimal, fraction, and scientific notation. Value is also used to calculate the result of an equation or a problem. Value is a fundamental concept in mathematics, and it is used to measure and compare different quantities.

This equation can be used to calculate the sum of any two numbers, x and 2. For example, if x is equal to 5, then the sum of x and 2 is equal to 5 + 2, which is equal to 7. Similarly, if x is equal to 10, then the sum of x and 2 is equal to 10 + 2, which is equal to 12. Therefore, the sum of x and 2 depends on the value of x.

To know more about value click-
https://brainly.com/question/843074
#SPJ1

Answer:

64.58

Step-by-step explanation:

1 meter is 3.28084 so 3 meters is 9.84252 because you multiply it by 3 or add them to each other 3 times. 2 meters is 6.56168 because you multiply it by 2 or add them to each other. now that you have 6.56168 and 9.84252 multiply them with each other and you get 64.5834666336 but it was said to round to nearest hundredth so since the 3 in front of the 8 is not a 5 and above the answer is 64.58 and not 64.89

a) The expected (mean) number of shots that Zlatan Ibrahimović must make to score a goal is 3.11.

b) The standard deviation of the distribution is 2.46.

The expected number or mean (μ) of a distribution is computed as sum resulting from the multiplication of each value of the random variable by its probability and adding the products.

The formula for the mean is given as E(x) = ∑x P(x).

On the other hand, to compute the standard deviation (σ) of a probability distribution, we find each deviation from its expected value, square it, multiply it by its probability, add the products, and take the square root.

No. of shots    Probability    Expected        Squared      Squared Deviation

                       of scoring    No. of shots     Deviation     x Probability

0                         0.02               0                   9.6721            0.193442

1                          0.13                0.13               8.8804           1.154452

2                         0.34               0.68              5.9049          2.007666

3                         0.32               0.96              4.6225          1.4792

4                         0.16                0.64              6.1009          0.976144

5                         0.02               0.1                9.0601            0.181202

6                         0.01               0.6                6.3001            0.063001

The expected (mean)

 number of shots =                3.11                                     6.055107

Standard Deviation = Square root of 6.055107 = 2.46

Learn more about the expected mean and standard deviation at https://brainly.com/question/22247668.

#SPJ1

Answer:

Step-by-step explanation:

The area A of a rectangle is given by the formula:

A = length × width

In this case, the length is 2x - 4 units and the width is x + 1 units. So the function that models the area of the rectangle is:

A(x) = (2x - 4)(x + 1)

Expanding this expression, we get:

A(x) = 2x^2 - 2x - 4x + 4

A(x) = 2x^2 - 6x + 4

To find the area when x = 3, we can substitute x = 3 into the function:

A(3) = 2(3)^2 - 6(3) + 4

A(3) = 18 - 18 + 4

A(3) = 4

Therefore, when x = 3, the area of the rectangle is 4 square units.

Step-by-step explanation:

the perimeter of a rectangle is

2×length + 2×width

in our case

length = width + 3

and

2×length + 2×width = 30

using the first equation in the second :

2×(width + 3) + 2×width = 30

width + 3 + width = 15

2×width + 3 = 15

2×width = 12

width = 12/2 = 6 ft

length = width + 3 = 6 + 3 = 9 ft

Answer:

x=66 and y=63

Step-by-step explanation:

The middle triangle is isosceles

57+57+x=180

114+x=180

x=66

Left triangle is equilateral (all angles =60)

60+57+?=180

117+?=180

?=63

Right triangle is isosceles

?=y

y=63

The total charge for 782 units of call is 2364 naira.

What is a total charge?

Total Charges refers to all payments made by the Customer and all amounts due under the Contract for products and services that the Council has actually provided, regardless of whether the Customer has received an invoice.

We can use the formula:

total charge = fixed charge + charge per unit x number of units

a) For 80 units of call:

total charge = 800 + 2 x 80

total charge = 800 + 160

total charge = 960 naira

Therefore, the total charge for 80 units of call is 960 naira.

b) For 150 units of call:

total charge = 800 + 2 x 150

total charge = 800 + 300

total charge = 1100 naira

Therefore, the total charge for 150 units of call is 1100 naira.

c) For 782 units of call:

total charge = 800 + 2 x 782

total charge = 800 + 1564

total charge = 2364 naira

Therefore, the total charge for 782 units of call is 2364 naira.

To know more about total charge visit,

https://brainly.com/question/18102056

#SPJ1

By using the Pythagorean theorem we know that the given triangle is not a right triangle.

The Pythagorean theorem, sometimes known as Pythagoras' theorem, is a basic relationship between a right triangle's three sides in Euclidean geometry.

According to this statement, the areas of the squares on the other two sides add up to the size of the square whose side is the hypotenuse.

Pythagorean triples consist of the three positive numbers a, b, and c, where a2+b2 = c2.

The symbols for these triples are (a,b,c). Here, a represents the right-angled triangle's hypotenuse, b its base, and c its perpendicular.

The smallest and most well-known triplets are (3,4,5).

So, we have the values already,

Now, calculate as follows:

3² + 4² = 6²

9 + 16 = 36

25 ≠ 36

Hence, the given triangle is not a right triangle.

Therefore, by using the Pythagorean theorem we know that the given triangle is not a right triangle.

Know more about the Pythagorean theorem here:

https://brainly.com/question/343682

#SPJ1

The correct answer is the third option: (28 - 2) x 180 / 28.

An -sided polygon with regular sides that are all the same length and symmetrically arranged around a common centre is known as a regular polygon (i.e., the polygon is both equiangular and equilateral).

Every side of a regular polygon with 28 sides is the same length, and every interior angle is the same size.

The formula: gives the sum of the internal angles of a polygon with n sides.

Interior angle total equals (n - 2) x 180 degrees.

Each interior angle of a regular polygon has the same measure, thus we can calculate each interior angle's size by dividing the total of its internal angles by the number of sides. For a regular polygon with 28 sides, the expression to get each angle's measure is as follows:

(28 - 2) x 180 / 28

Simplifying the phrase:

(26 x 180) / 28

For a regular polygon with 28 sides, the shortened expression that may be used to determine each angle measure is:

4680/28

Which is further condensed to:

105*(4/7)

Hence, the appropriate phrase is:

(28 - 2) x 180 / 28 = 4680/28 = 105*(4/7)

As a result, the third option—(28 - 2) x 180 / 28—is the proper response.

To know more about Regular Polygon visit:

https://brainly.com/question/14401104

#SPJ1

Using the two equations, we can determine that the possible widths of the river are 75 m and 90 m.

We can use the properties of triangles to determine the possible widths of the river. Using the triangle △BCA, we can calculate the width of the river using the law of cosines. We know that the angle at C is 90° and the length of side AB is the width of the river. We can calculate the length of side BC using the equation: [tex]BC^2 = AB^2 + AC^2[/tex] - 2(AB)(AC)cos(90°). Similarly, we can use △BDA to calculate the width of the river. We know that the angle at D is also 90° and the length of side AD is the width of the river. We can calculate the length of side BD using the equation: [tex]BD^2 = AD^2 + AB^2[/tex] - 2(AD)(AB)cos(90°). Using the two equations, we can determine that the possible widths of the river are 75 m and 90 m.

the complete question is :

Points C, A, and D are located along the edge of a river and point B is on the opposite edge. The distance between A and D is 40 meters. The distance between C and B is 30 meters. The angles at A and D are both 90 degrees. Use △BCA and △BDA to determine which of the following are possible widths of the river.

a) 60 meters

b) 35 meters

c) 45 meters

d) 50 meters

Learn more about equation here

https://brainly.com/question/29657992

#SPJ1