2. Outer planets have these characteristics:
A. Long orbits, made up of gas, have many moons
B. Long orbits, made up of gas, have few moons
C. Short orbits, made up of gas, have many moons
D. Long orbits, have a rocky crust, have many moons

The wave pulses always travel in the same direction. Each pulse differs significantly in terms of amplitude. Va = vb = vc as a result.

Pulses come in a wide variety of sizes and forms and are just dried seeds from legumes. The four most popular pulses—beans, chickpeas, lentils, and peas—and some of its variants will be described, illustrated, and given common names in this book.

The edible seed of a legume plant is known as a pulse. Peas, lentils, and beans are examples of pulses. As an illustration, a pea pod is a legume, while the pea within is a pulse.

The fastest and slowest waves should be calculated. The three scenarios in the illustration each illustrate a different amplitude of the wave with the same string.

Consequently, va = vb = vc.

Learn more about pulses visit: brainly.com/question/3521932

#SPJ4

Gestalt principles refer to a set of laws in psychology that describe how people perceive visual information. The four principles you mentioned are:

Proximity: Objects that are close to each other are perceived as being related to each other.

Similarity: Objects that are similar in appearance are perceived as being related to each other.

Continuity: People tend to perceive lines and shapes as continuing in the same direction, even if they are interrupted.

Closure: People tend to perceive incomplete shapes as complete, such as seeing a full circle when presented with a set of dots arranged in a circular pattern.

Gestalt theory reinforces the fact the whole of anything is greater than its parts. That is, the attributes of the whole are not deducible from analysis of the parts in isolation. The word Gestalt is utilized in modern German to imply the way a thing has been “placed,” or “put together.” There is no exact equivalent in English.

These principles help us understand how our brain organizes and interprets visual information, and are often used in design to create clear and effective visual layouts.

learn more about Gestalt: https://brainly.com/question/8166281

#SPJ1

Galaxy: The distance was calculated in 2004 using the Cepheid variable method to be 2.51 0.13 million light-years (770 40 kpc). In the Andromeda Galaxy, an eclipsing binary star was found in 2005.

The universe, Earth, the solar system, the Milky Way galaxy, the local group, and the local supercluster.

Astronomers discovered a truly enormous galaxy earlier this year. Alcyoneus is a massive radio galaxy that is around 3 billion light-years away and extends 5 megaparsecs into space. Its length, 16.3 million light-years, makes it the longest structure of known galactic origin.

Our Sun and the Earth are travelling at a speed of about 43,000 miles per hour (70,000 km/hr) roughly in the direction of the brilliant star Vega in the constellation Lyra relative to the local standard of rest.

To learn more about galaxy visit:

brainly.com/question/2905713

#SPJ4

Answer:

0.90 seconds

Explanation:

Given Info:

Object of mass ⇒ 1.2 kg

Velocity of 2.0m/s when it is acted on by a force of 4.0 N

Velocity of the object Increased to 5.0 m/s

Question:

For what period of time does the force act on the object?

Solve:

We first need to know the formula:

F = ma  Or F = m(v-u)/t

F = force

m = mass of an object

a = acceleration

v = Final Velocity

u = Initial Velocity

a = Acceleration

t = Time Taken

Knowing that;

Force = 4.0 N

Mass of an object = 1.2 kg

Final velocity = 5.0m/s

Initial velocity = 2.0m/s

Time taken = [t]

Now lets plug it in the formula:

F = m(v-u)/t

4.0 = 1.2(5-2)/t

t = 0.90 seconds.

Hence, period of time at which force is acted on the object is 0.90 sec.

RevyBreeze

Answer:

On Edg 2021, the answer was "B = The moon's orbital period and distance from Earth"

Explanation:

I hope this is correct for you, if it isn't I am very sorry. Good luck! :)

Newton's principles of motion and the universal law of gravitation can be used to derive Kepler's third law. Make the centripetal force equal to the force of gravity. The following expression, which may also be written as P2=42a3GM, can be obtained by inserting an expression for the planet's velocity: GMr=4r2P2. Thus, option B is correct.

Newton demonstrated that the force that causes something to fall toward the ground, like an apple, is the same force that causes the moon to orbit the Earth. The Sun, as well as any other star and its satellites, are affected by this universal force.

Newtonian physics and Kepler's laws serve as the foundation for planetary motion and orbital laws. Because these fundamental rules govern everything in the cosmos, they also govern how planets and artificial satellites move.

Therefore, If two things experience the same acceleration when the same force is applied to them, then they have the same inertial mass. Newton's second law makes use of the same mass.

Learn more about Kepler's laws here:

https://brainly.com/question/1608361

#SPJ2

Answer:

2NH3 --> N2 + 3H2 decomposition

If the series circuit that powers your holiday lights were to be severed in the middle. The lights would all stop functioning. Only one light would stop working if the lights were linked in parallel circuit.

A series circuit is a straightforward circuit that enables electrons to go between one or more resistors. A resistor is anything that drains energy from a cell (battery). The resistor in a series circuit is typically a lightbulb. A series circuit is one in which the entire current flows through each element. A series circuit is a straightforward circuit that enables electrons to go between one or more resistors.

Learn more about series circuit  here

https://brainly.com/question/11409042

#SPJ4

Mechanical energy is used to start the Ferris wheel, providing the initial rotation and motion to the wheel.

The motion of the wheel then causes the lights along the seats to be powered, allowing them to light up as the wheel turns. The wheel is then able to generate kinetic energy as it moves, which it then uses to continue turning.

As the wheel turns, it transfers its energy from mechanical to kinetic, and this energy is used to keep the wheel moving from start to finish. Kinetic energy is also used to power the centrifugal force which keeps the riders in their seats as the wheel turns, allowing them to enjoy the ride.

Learn more about energy:

https://brainly.com/question/25959744

#SPJ4

Answer: 64 m is the maxium distance the ball can travel

The magnitude of the gravitational field of the planet depends on its mass and distance from the object being affected by it.

What is Gravitational field?

Gravitational field is a region of space where a mass or object experiences a force of gravity. It is caused by the presence of a massive object, such as a planet or star, which exerts a gravitational pull on other objects within its vicinity. The strength of the gravitational field is determined by the mass of the object and its distance from other objects.

The gravitational field of the planet at Point P can be calculated by using the equation,

g = G*M/r2

where G is the gravitational constant (6.67 x 10-11 Nm2/kg2), M is the mass of the planet (4 x 1026 kg), and r is the distance from the center of the planet to Point P (53,000 km).

Plugging in the values,

g = (6.67 x 10-11 Nm2/kg2) x (4 x 1026 kg) / (53,000 km)2

g = (6.67 x 10-11 Nm2/kg2) x (4 x 1026 kg) / (2.8409 x 1012 m2)

g = (6.67 x 10-11 Nm2/kg2) x (14.1636 x 1015 kg)

g = 9.5 x 10-5 N/kg

Therefore, the magnitude of the gravitational field of the planet at Point P is 9.50 x 10-5 N/kg.

To know more about gravitational field,

https://brainly.com/question/1281551

#SPJ4

The energy of the molecules in the ground increases in the given case when the temperature increases.

Convection and conduction are two ways that the Earth's heat is released.

Conduction takes place when the transferring of heat takes place from something hot to something cold.

On the other hand, convection takes place when the transferring of heat takes place by the movement of hot gases or liquids like water, air, or magma to a cooler region.  

Near the surface of the ground, the convection of heat water results in the hot springs and geysers to shoot up into the air through a hole in the ground.

To know more about temperature:

https://brainly.com/question/18271013

#SPJ4

Answer:

nitrogen

Explanation:

because I also had this in exam and I was correct

Answer:

A chemical reaction expresses a chemical change. For example, one chemical property of hydrogen is that it will react with oxygen to make water. We can write that as follows:

hydrogen reacts with oxygen to make water

We can represent this chemical change more succinctly as

hydrogen + oxygen → water

And I can carry my nickels far more easily than you can your bucket of pen-nies. I would prefer to keep every pen-ny. A 40 inch circle would contain about 2507 pen-nies. About 493 nickels would be in a 20 inch circle.

To know more about Diameter here

https://brainly.com/question/23220731

#SPJ4

Answer:

The frequency of Red colour is minimum.

Explanation:

VIBGYOR

violet,Indigo,Blue, Green, yellow, Orange,Red

Violet to Red the wavelength increases and Frequency decreases.

By using the formulae, λ = h/mv, The De Broglie wavelength of the muon is calculated to be 4.13 × 10^10 m, as according to the given data in the question.

The shortest measured time is 100 attoseconds. A quadrillionth of a minute is a femtosecond. One quadrillionth of a minute is a picosecond. One quadrillionth of a second is a nanosecond.

Particles are smaller than just a nanometer. Depending on the element, an atom is between 0.1 and 0.3 nm in size. Atoms on the a surface in a SEM image.

To know more about Particles visit:

brainly.com/question/1685421

#SPJ4

It's crucial to inspect the brake drums as part of your walk-around examination before setting off on a journey. If any brake drum has a crack that is more than half the breadth of the friction region.

Overheating and undercooling of the brake pedal during operation might result in cracked drums.

Drums with cracks need to be changed right away. Blue ground -High temperatures, braking imbalance, abrupt stops, dragging brakes, or glazed brake pads can all result in blue drums. If no cracks have appeared, blue drums can still be utilized.

To know more about brake drums visit:

brainly.com/question/20895055

#SPJ4

the 3rd option is the correct answer

(. ^ ᴗ ^.)

Answer:

0.667 m

Explanation:

Applying,

v = λf................ Equation 1

Where v = velocity of sound, λ = wave length, f = frequency

make λ the subject of the equation

λ = v/f.............. Equation 2

From the question,

Given: v = 343 m/s, f = 514 hertz

Substitute these values into equation 2

λ = 343/514

λ = 0.667 m

Hence the wavelength of the sound wave is 0.667 m

Answer:

a soft foam material because soft materials absorb sound better

In a transformer, energy is carried from the primary coil to the secondary coil by The magnetic field in the iron core.

What is transformer?

A Transformer is an electrical device used to increase or decrease the voltage provided to an electrical circuit. It is made up of two or more coils of wire wound around a common core. The coils are typically referred to as the primary and secondary winding. Electricity flowing in the primary winding creates a magnetic field, which in turn induces a voltage in the secondary winding. The ratio of primary to secondary winding determines the output voltage. Transformers are used extensively in the electricity distribution network, enabling the safe and efficient transmission of electricity over long distances.

To learn more about transformer

https://brainly.com/question/1312500

#SPJ4

To start and stop an item in motion, according to Newton's First Law of Motion, requires a force.

Newton's first law encapsulates the idea that an object's velocity only changes in response to a force. Unless acted upon by a net external force, Newton's first law states that an object at rest will remain at rest and an object in motion will continue to move at a constant speed.

Unless acted upon by a net external force, Newton's first law states that an object at rest will remain at rest and an object in motion will continue to move at a constant speed.

To know more about Newton's Law of motion visit:-

https://brainly.com/question/29775827

#SPJ4

Sea stars, brittle stars, as well as feather stars are a few examples of echinoderms. Despite their apparent differences, echinoderms share two key identifying traits that make them all identifiable.

Echinoderms are effective scavengers of decomposing material on the seafloor and feed on a range of microscopic organisms, which helps control their population. Sea urchins can destroy tropical sea-grass beds when they are present in great numbers, harming the creatures that live there astrophysics

Because of their spiny skin, Echinodermata are so termed (from the Greek "echinos" for "spiny" and "dermo's" for "skin"). There are around 7,000 described extant species in this phylum. Only marine species can be classified as Echinodermata.

To know more about echinoderms visit:

https://brainly.com/question/10298388

#SPJ4

Answer:

सं देश भर भर में नौ महिना अघिदेखि महिना अघिदेखि नै जातीय आधारमा प्रान्त पुगें र नेपाली जनताको लागि फरक छ तर त्यो पनि पाँचै वर्षमा धरासायी भयो पाँचै वर्षमा धरासायी भयो भने हेर्न त्यो पनि हो र स्वार्थी हुन्छ भन्थे यो मेरो पहिलो मृत्यु भएको हो। छ। यो म भने त्यो प्रेम कति

Harrison is incorrect because particles can force each other to vibrate more easily in elastic materials where particles are closer together. So, option A.

Vibration is a periodic back-and-forth motion of the particles in an elastic body or medium.

Here,

Vibrations occurs when practically any physical system is moved out of its equilibrium condition and is left to react to forces that work to bring it back into equilibrium.

A periodic shift in time is referred to as a vibration. A wave is a regular oscillation in both space and time. The waves propagate from one point to another in a medium.

Most waves travel through different media, and this affects how fast they move.

In general, waves go through solids the quickest and gases the slowest. The reason for this is that while particles in a gas are farthest to one another, those in a solid are closer to one another.

Hence,

Harrison is incorrect because particles can force each other to vibrate more easily in elastic materials where particles are closer together. So, option A.

To learn more about vibration, click:

https://brainly.com/question/11148922

#SPJ2

If three subintervals of equal length are used to do midpoint Riemann sum approximation of ∫f(x)dx from 3 to 6, then width of each subinterval is  1.

To find the midpoint Riemann sum, you first need to divide the interval of integration (from 3 to 6) into three subintervals of equal length. You can choose subintervals of equal length manually by dividing the interval of integration into smaller parts. If we let the width of each subinterval be x, then the length of the interval is 6-3 = 3 and the length of each subinterval, x is 3/3 = 1.

Then, you need to find the midpoint of each subinterval by adding the left and right endpoint of each subinterval and dividing by 2.

For example, the first subinterval is from 3 to 4, so the midpoint is (3+4)/2 = 3.5

the second subinterval is from 4 to 5, so the midpoint is (4+5)/2 = 4.5

and the third subinterval is from 5 to 6, so the midpoint is (5+6)/2 = 5.5

To approximate the area under the curve of f(x) for each subinterval, you can use the value of f(x) at the midpoint of each subinterval and multiply it by the width of the subinterval.

--The question is incomplete, answering to the question below--

"Let f be the function graphed below. If three subintervals of equal length are used, draw rectangles whose area represents a midpoint Riemann sum approximation of ∫f(x)dx from 3 to 6. Width of each subinterval is ____."

To know more on midpoint Riemann sum approximation

https://brainly.com/question/15313559

#SPJ4

The second charge is 0.0002c in size. For a negative charge of -0. 0005 C, a second charge that is 10 metres away experiences an attracting force of 9.0 N.

In science, the issue of magnitude is undoubtedly of utmost significance. Magnitude typically refers to a size or a distance. We can relate magnitude to the movement by comparing the size and motion speed of the thing. A force in physics is an effect that has the power to alter an object's motion. A force can cause an object with mass to change its velocity, or accelerate (for example, moving from a condition of rest).

q2 = 9*(10)^2/(9*10^9*0.0005)

q2 = 0.0002C

Learn more about force here

https://brainly.com/question/13191643

#SPJ4

A wave crest is the tallest point in the wave with the greatest displacement value. The junction of the 3-meter and 2-meter waves produces a 1 metre amplitude.

What exactly is amplitude ?

The amplitude of a wave is the measurement of the wave from its still position to its crest or trough. It is measured in metres.

When the wave is crossed, the elevation is 3 metres and the depression is 2 metres, resulting in an amplitude that causes destructive interference. Because 3 m is above the baseline and 2 m is below it, the resultant amplitude is 3 - 2 = 1 m.

As a consequence, the resultant amplitude is one metre.

To learn more about amplitude follow the given link: brainly.com/question/13814350

#SPJ4

The complex impedance of the 100 mH inductance when a voltage vL(t) = 10cos(2000πt) is applied to it is: j200Ω.

What is inductance?

Inductance is a property of an electrical component that describes the ability of the component to store energy in a magnetic field when electric current passes through it.

Inductance is measured in units of henrys (H). When current flows through a component with inductance, it creates a magnetic field around the component that resists changes to the current. This resistance to changes in current is called inductive reactance and is measured in units of ohms.

The complex impedance of an inductor is given by Z = jωL, where ω is the angular frequency and L is the inductance.
Therefore, the complex impedance of the 100 mH inductance when a voltage vL(t) = 10cos(2000πt) is applied to it is:
Z = j(2000π) (100 x 10-3) = j(2π) (100 x 10-3) = j200Ω

To learn about more inductance

https://brainly.com/question/7138348

#SPJ4

The piston's position, velocity, and acceleration at t = 1.15 s are :

Position: 3.45 m

Velocity: 3 m/s

Acceleration: 0 m/s^2

To calculate the piston's position, velocity, and acceleration at t = 1.15 s, we need to know the angular position, velocity, and acceleration of the wheel.

The angular position of the wheel at t = 1.15 s is given by

θ = ωt + [tex]A_{0}[/tex]

where ω is the angular frequency, t is the time, and [tex]A_{0}[/tex] is the initial angular position.

Since the angular frequency is given as 12 rad/s and the initial angular position is 0, the angular position of the wheel at t = 1.15 s is

θ = 12 x 1.15 = 13.8 radians

The piston's position is given by

r = Rθ

where R is the radius of the wheel.

Substituting the value of R and θ,

r = 0.25 x 13.8 = 3.45 m

The velocity of the piston is given by

v = r' = Rθ' = Rω

Substituting the values

v = Rω = 0.25 x 12 = 3 m/s

Acceleration of the piston is given by

a = v' = Rθ'' = Rω' = R(ω^2)θ

As the angular frequency is constant, the angular acceleration is 0 so the linear acceleration is also 0.

Note: Linear acceleration is not equal to the derivative of linear velocity, it is equal to the derivative of velocity with respect to time, which is zero in this case.

Read more about linear and angular kinematics :

https://brainly.com/question/12977552

#SPJ4