Answer:
b is your answer
Explanation:
Please answer. I will be picking the brainiest answer as well!
After watching the 2nd video, select the correct results to fill in the chart below:
what am I doing wrong
KI - Ionic compound, KCl -Ionic compound,
C₆H₁₂O₆ - Covalent compound, C₆H₄Cl₂ - Covalent compound,
KNO₃ - Ionic compound, C₆H₅COOH - Covalent compound
CH₃COOH - Covalent compound, Paraffin wax - Covalent compound
HCl - Covalent compound
What are ionic and covalent compounds?Ionic compounds are formed from the interaction between cation ions and anions. A cation of an atom can be described as an electropositive ion and can donate valence electrons. Similarly, anions of an atom are electronegative ions and can accept electrons.
In an ionic compound, there is a complete transfer of electrons in the formation of an ionic bond, therefore, there exists an electrostatic force of attraction between the ions that forms a strong bond.
In a covalent compound, there is the mutual sharing of electrons in the covalent bonds. The shared electrons are hard to give away as nuclei of two atoms together share the electrons and create a bond stronger.
Learn more about the ionic and covalent compound, here:
brainly.com/question/12144907
#SPJ1
Meiosis is the cell divison that occurs in non reproductive cells
True
False
Explain what it means for materials to move down their concentration gradient and up their concentration gradient.
Moving down the concentration gradient means that materials move from an area of high concentration of the material to an area of low concentration of the material.
What is concentration?In chemistry, concentration is the amount of a substance in a given space. Another way to describe concentration is the proportion of the solute to a solvent or entire solution. In general, mass/unit volume is used to express concentration. Instead of using volume, concentration can be stated as a mass per unit. Although concentration is typically used to describe chemical solutions, it may be computed for any mixture.
This can be seen in osmosis, where water moves from a higher concentration of solute to a lower concentration of solute.
To learn more about concentration
https://brainly.com/question/26255204
#SPJ4
An inland area has little water or plant life.
What would the climate of this place likely be?
The inland area has a Continental climate.
Inland climates are typically more severe. Summers might be quite hot, and winters could be very frigid. Rainfall can be scarce.
In inland area the water bodies take long time to heat up and cool down, so they absorb all the heat during the spring and summer when the sun is at its greatest before slowly losing it throughout the fall and winter when the temperature starts to drop.
On the other hand, it warms up and cools down far more quickly on land, that's why the inland are more cooler.
Inland absorbs and releases heat energy more quickly than water, inland places typically experience higher temperature variations from day to night and from season to season, so that inland is hotter area also.
To know more about, Energy click here:
brainly.com/question/1932868
#SPJ4
Dry ice is solid carbon dioxide that is used in the transport of food and medicine. dry ice becomes a gas at –78.5°c without becoming a liquid first. what change of state is being described?
The surface temperature of a block of solid carbon dioxide (dry ice) is -78.5 degrees Celsius (-109.8 degrees F). Once it reaches this temperature, carbon dioxide completely bypasses the liquid state and transforms into a gas. One pound of dry ice produces 250 liters of carbon dioxide gas!
Carbon dioxide in the form of dry ice is employed. Sublimation is the process by which CO2 transforms from a solid to a gas without first undergoing a liquid phase, and it takes place at pressures lower than 5.13 atm and temperatures higher than 56.4 °C (216.8 K; 69.5 °F) (the triple point).
When a substance changes immediately from a solid to a gas without melting beforehand. The carbon dioxide is still present; it simply passes.
Learn more about dry ice
brainly.com/question/13972158
#SPJ4
Answer:
Sublimation
Explanation:
C
Photosynthesis Notes
1. Give the Greek root word meaning for photoautotroph.
2. What was von Helmont testing with his willow tree experiment? What was the result?
3. Define the law of conservation of mass.
4.
Describe the experiment used by Joseph Priestly to discover oxygen.
5. List the primary constituents of air.
a.
b.
C.
d.
e.
6. What did Jan Ingenhousz discover about plants?
7. Based on the work of Nicolas de Saussure, what are the two primary sources of mass for
plants?
8. Define photosynthesis-
9. Define potential energy-
Photoautotroph has been derived from the combination of three words, photo -meaning "light", autos- meaning "self", and troph meaning "nutrition".
Land plants and photosynthetic algae are both photoautotrophs. These species contain pigments that can capture light, like chlorophyll. Origin of the word: photo- (light) + auto (self) + troph (nourishment). Autotrophs known as photoautotrophs generate complex chemical substances like proteins, lipids, and carbohydrates by absorbing light. Photosynthesis is the name given to this light-mediated process.
An energy-rich carbohydrate like glucose is produced by plants using carbon dioxide, inorganic salts, and water during a process called photosynthesis. As a byproduct, oxygen is also produced, other than glucose. Land plants and photosynthetic algae are both photoautotrophs. These species contain pigments that can capture light, like chlorophyll.
To know more about autotrophs, refer to the following link:
https://brainly.com/question/28623341
#SPJ4
Pure oxygen boils at -183 ℃ and freezes at -219 ℃. What state will the oxygen be in if the temperature is brought to within 35 K of absolute zero?
Answer:
Solid.
Explanation:
Hello there!
In this case, according to the given description of the freezing and boiling point of oxygen, it turns out possible for us to figure out the phase of oxygen at 35 K by just subtracting 273:
[tex]35-273=-238\°C[/tex]
In such a way, since this temperature is lower than its freezing point of -219 °C, we infer that such sample will be solid.
Regards!
anybody know the answer for these
KI - Ionic compound, KCl - Ionic compound,
C₆H₁₂O₆ - Covalent compound, KNO₃ - Ionic compound,
C₆H₄Cl₂ - Covalent compound, C₆H₅COOH - Covalent compound
CH₃COOH - Covalent compound, Parafin wax - Covalent
HCl - Covalent compound
What are ionic and covalent compounds?Ionic compounds can be classified as compounds formed between cation ions and an anion. A cation can be described as an electropositive ion and has the tendency to donate valence electrons. Similarly, anions are electronegative ions and have a tendency to accept electrons.
In an ionic compound, an ionic bond contains the complete transfer of electrons, therefore, there exists an electrostatic force of attraction that forms a strong bond.
In a covalent compound, the covalent bond exhibits the mutual sharing of electrons. Shared pairs of electrons are hard to give away as nuclei of two chemical elements together share the electrons and produce a bond stronger.
Learn more about the ionic and covalent compound, here:
brainly.com/question/12144907
#SPJ1
How many grams is 0.5 moles?
0.5 moles of carbon weigh 6.0055 grams.
One of the chemical elements is carbon. The letter C stands for carbon, and the letter g stands for grams. As a result, 0.5 moles of carbon per gram is equivalent to 0.5 moles of carbon per gram, 0.5 moles of carbon per gram, and 0.5 moles of C per gram.
Carbon has a 12.011 atomic mass. Thus, one mole of carbon has a mass of 12.011 grams (12.011 g/mol). We multiply 0.5 moles of carbon by 12.011 to get grams, and vice versa.
no. of Grams = Moles of Carbon x 12.011
=0.5 × 12.011 = 6.0055
0.5 moles of carbon equal 6.0055 grams.
To learn more about moles click here
https://brainly.com/question/15356425
#SPJ4
The complete question is
How many grams is 0.5 moles of carbon
How long will it take Caroline to travel 45 miles if she is traveling 37mph (miles per hour)?
In the given question,It will take Caroline 1.2 hours to travel 45 miles if she is traveling 37 mph (miles per hour).
As we know the velocity formula:
v = d/t
Where
V is velocity, d is distance and t is time.
as given in the question
distance = 45 miles
velocity = 37 mph
To find time t,
put the values in the formula:
t = d/v
t = 45/37
t = 1.2 hours
It will take Caroline 1.2 hours to travel 45 miles if she is traveling 37 mph (miles per hour).
If you need to learn more about similar questions, click here
https://brainly.com/question/29243041?referrer=searchResults
#SPJ4
Determine the number of atoms of each element in the following: 3CO3
Into how many peaks would you expect the 1H NMR signals of the indicated protons to be split? (Assume all coupling constants are equal. )
The 1H NMR signals of the indicated protons would be split into three peaks.
What are Protons?
Protons are subatomic particles that are present in the nucleus of an atom. They have a positive electric charge and are one of the three main components of an atom, along with electrons and neutrons. Protons are the heaviest of the three particles and make up a large portion of an atom's mass. The number of protons in an atom is known as its atomic number and is what determines an element's chemical behavior and properties.
The split happens because each proton is coupled to two other protons, and each proton is affected by the other two, resulting in a triplet.
To know more about protons,
https://brainly.com/question/1805828
#SPJ4
When a new substance is formed, what kind of change has taken place? *
Physical Change
Chemical Change
O Phase Change
O None of the above
Answer:
Chemical Change
Explanation:
Physical change and phase change are both changes in the matter's state. Such as solid, gas and liquid. Not what it's made of. So when a new substance is formed, it' a chemical change.
Study the reactions.
C2H2 (g)+2H2 (g)→C2H6 (g)ΔH=−75 kcal
C2H4 (g)+H2 (g)→C2H6 (g)ΔH=−33 kcal
C2H2 (g)+H2 (g)→C2H4 (g)ΔH= ?
How can the enthalpy of Reaction III be calculated correctly?
A) by first multiplying the enthalpy of Reaction 2 by two and then finding the sum of the enthalpy of Reaction 1 and the enthalpy of Reaction 2
B) by first reversing Reaction 2 and then adding the enthalpy of Reaction 1 and the enthalpy of Reaction 2
C) by adding the enthalpy of Reaction 1 and the enthalpy of Reaction 2
D) by subtracting the enthalpy of Reaction 1 from the enthalpy of Reaction 2
Answer:
B) by first reversing Reaction 2 and then adding the enthalpy of Reaction 1 and the enthalpy of Reaction 2
Explanation:
C2H2 (g)+2H2 (g)→C2H6 (g) ΔH=−75 kcal
C2H4 (g)+H2 (g)→C2H6 (g) ΔH=−33 kcal
C2H2 (g)+H2 (g)→C2H4 (g) ΔH= ?
First step - Reverse reaction 2.
C2H6 (g) → C2H4 (g) + H2 (g) ΔH= 33 kcal
Second step - Add reaction 1 and the reversed reaction 2. This gives us:
C2H2 (g) + 2H2 (g) + C2H6 (g) → C2H6 (g) + C2H4 (g) + H2 (g)
Simplifying gives:
C2H2 (g)+H2 (g)→C2H4 (g)
The correct option is:
B) by first reversing Reaction 2 and then adding the enthalpy of Reaction 1 and the enthalpy of Reaction 2
Can a molecular formula ever be the same as an empirical formula? Explain your answer
Answer:
yes
Explanation:
The molecular formula for a compound can be the same as or a multiple of the compound's empirical formula. Molecular formulas are compact and easy to communicate; however, they lack the information about bonding and atomic arrangement that is provided in a structural formula.
acidity: rank 4-nitrophenol, 3-nitrophenol, and 4-nitro-4-methylcyclohexanol in order of acidity
Nitrophenols should be in the following order: para - > ortho - > meta -. There is one additional resonance structure in ortho- and para-nitrophenol.
The stability of the conjugate base dictates the acidity of nitrophenols (or any acid, for that matter). By examining the resonance structures, it is possible to assess the relative stability of m- and p-nitrophenols.Therefore, ortho- and para-nitrophenol are both more acidic than meta-nitrophenol as a result of resonance effects.Sort the following substances in ascending order of acidity: One is ortho-nitrophenol. Paranitrophenol 2. Para-methylphenol 3. 4 Nitrocyclohexanol An intermediary in the creation of paracetamol is 4-nitrophenol. It is then acetylated with acetic anhydride after being reduced to 4-aminophenol.
learn more about Nitrophenol Refer:brainly.com/question/20458462
#SPJ4
Use the drop-down menus to identify the names of the structures in the table to the right.
Answer:
If this is for the "functional groups" question:
1. aldehyde
2. ketone
3. ester
4. carboxylic acid
Explanation:
Got them all right on edge.
The drop-down menus to identify the names of the structures in the table to the right
1. Aldehyde
2. Ketone
3. Ester
4. Carboxylic acid
What is functional group example?A functional group in organic chemistry is a pool of atoms within molecules which bind jointly to react in predicted ways.
Examples of functional groups contain the group hydroxyl, ketone, amine, and ether.
Thus, these are the drop down menus.
To learn more about functional group click here:
https://brainly.com/question/15892481
#SPJ2
How many grams of O₂ are required to react completely with 14.6 g of Na to form sodium oxide, Na₂O?
The balanced chemical reaction is :
[tex]O_2 + 4Na \ -> \ 2Na_2O[/tex]
Number of moles of Na, [tex]n = \dfrac{14.6}{23} = 0.635 \ mol[/tex] .
Now, from balance chemical reaction we can see that 1 mole of oxygen reacts with 4 moles of sodium.
So, number of moles of oxygen are :
[tex]n = \dfrac{0.635}{4}\ mole[/tex]
So, amount of oxygen required is :
[tex]m = \dfrac{0.635 \times 32}{4}\ gm\\\\m = 5.08 \ gm[/tex]
Therefore, 5.08 gram of oxygen will react with 14.6 gram of sodium.
CF4 + Br2 CBr4 + F2
Mole Ratio?
How many moles of F2 can you make from 57 g of CF4?
How many grams of Br2 do you have if you made 250 g of CBr4?
How many moles of F2 can you make from 4.8 mol of CF4?
Answer:
Answers are in the explanation
Explanation:
Based on the reaction:
CF₄ + 2Br₂ → CBr₄ + 2F₂
The mole ratio of CF₄ is:
CF₄:Br₂ = 1:2
CF₄:CBr₄ = 1:1
CF₄:F₂ = 1:2
Moles F2:
Molar mass CF₄: 88.0g/mol
57.0g * (1mol / 88.0g) = 0.6477 moles CF₄ * (2mol F₂ / 1mol CBr₄) =
1.30 moles F₂Mass Br2:
Molar mass CBr₄: 331.63g/mol
250.0g * (1mol / 331.63g) = 0.7539 moles CBr₄ * (2mol Br₂ / 1mol CF₄) =
1.51 moles Br₂ * (159.808g / mol) =
241g Br2Moles F2:
4.8 moles CF₄ * (2mol F₂ / 1mol CF₄) =
9.6 moles F₂
does calcium oxide reacts with carbon monoxide
Yes, calcium oxide (CaO) reacts with carbon monoxide (CO) to form calcium carbonate (CaCO3) and oxygen gas (O2). The reaction can be represented by the following equation:
CaO + CO -> CaCO3 + O2
This reaction is an example of a chemical change, as it results in the formation of a new substance with different chemical properties. The reaction is also exothermic, meaning that it releases heat.
Calcium oxide is a white solid that is used in a variety of applications, including cement production and the purification of flue gases. Carbon monoxide is a colorless, odorless gas that is toxic to humans when inhaled. It is produced as a byproduct of the incomplete combustion of fossil fuels.
Hope This Helps You!
A student filled a dialysis tube with 97% water solution and sealed the ends. The tube and its contents had a mass of 55 grams. The student placed the tube in a solution, and the mass of the tube and its contents increased to 60 grams. Into which solution was the dialysis tube placed
The dialysis tube was placed in a solution with a higher concentration of solutes than the 97% water solution inside the tube.
What is solution?Solution is a way of resolving a problem or addressing an issue. It often involves identifying the underlying cause of the issue and then coming up with a plan that can be implemented to address the problem. Solutions may involve simple steps, such as changing a behavior, or they may involve more complicated processes that require multiple steps, such as creating new policies or procedures. Solutions should be designed to be effective, sustainable, and measurable.
To learn more about Solution
https://brainly.com/question/25326161
#SPJ4
Question 3
Which of the following is true of solar energy?
1. A technique for generating electricity using solar energy has not been developed.
2. The Sun's rays strike the Earth continuously; therefore storing electricity generated by solar cells is not necessary.
3. Producing electricity using solar cells is expensive.
4. The quantity of solar energy available to produce electricity is not affected by location on Earth's surface.
The quantity of solar energy available to produce electricity is not affected by location on Earth's surface. This statement is true about solar energy.
What is solar energy ?
Solar energy uses the sun's rays to create heat, light, and electricity. It is a renewable energy source. Heat may be employed in industrial activities like manufacturing whereas light can be immediately transformed into energy..
Solar energy may be converted directly into electrical power. A nonmechanical device called a photovoltaic cell is often constructed of silicon alloys. Photons, or solar energy particles, make up sunlight.
Due to the employment of particular grade silicon and silver during production, solar cells have a high cost of production. Solar cells don't have any moving components, so they may be readily installed in distant locations, but once installed, they don't require any care.
Thus, option D is correct.
To learn more about solar energy follow the link below;
https://brainly.com/question/9704099
#SPJ2
The addition of electron shells results in _______ shielding of electrons from the nucleus.
Answer:
I believe the answer is "increasing"
Answer:
the shielding of electrons.
Explanation:
The nucleus pulls electrons to itself due to the net positive charge on it.As more electronic shell is added, the effect of the pull weakens outward.The inner shell experiences the nuclear pull more than the outer shell electrons.
If 2.1 moles of NaCl is dissolved in a solution with a total volume of 7.3 liters, what is the molarity of the solution? Round to two decimals.
Answer:
The molarity of the solution is 0.29 [tex]\frac{moles}{liter}[/tex]
Explanation:
Molarity, or molar concentration, is a measure of the concentration of a solute in a solution, be it some molecular, ionic or atomic species. It is defined as the number of moles of solute that are dissolved in a given volume.
Molarity is calculated as the quotient between the number of moles of solutes and the volume of the solution:
[tex]Molarity=\frac{number of moles of solute}{volume}[/tex]
Molarity is expressed in units [tex]\frac{moles}{liter}[/tex].
In this case:
number of moles of solute= 2.1 molesvolume= 7.3 litersReplacing:
[tex]Molarity=\frac{2.1 moles}{7.3 liters}[/tex]
Molarity= 0.29 [tex]\frac{moles}{liter}[/tex]
The molarity of the solution is 0.29 [tex]\frac{moles}{liter}[/tex]
Answer:
M = 0.29 M
Explanation:
We are given;
Number of moles of NaCl; n = 2.1 moles
Total volume of solution; V = 7.3 L
Formula for molarity is;
M = n/L
Thus;
M = 2.1/7.3
M = 0.2878 M
Approximating to 2 decimal places gives;
M = 0.29 M
how many carbon atoms are in 2.12 mol of propane. how many hydrogen atoms are in 2.12 mol of propane
There are 5,944 carbon atoms in 2.12 moles of propane, and 15,528 hydrogen atoms in 2.12 moles of propane.
What is carbon?
Carbon is an element that occurs in nature and is essential for life. It is the fourth most abundant element in the universe and is present in all living organisms. Carbon exists in many different forms, including graphite, diamond, amorphous carbon, and fullerenes. Carbon is a key component of organic molecules, which are the building blocks of life. Carbon also plays an important role in the global carbon cycle.
To learn more about carbon
https://brainly.com/question/26150306
#SPJ4
The following questions refer to the hypothetical reaction A + B products. The kinetics data given can be analyzed to answer the questions. [A]0 [B]0 Rate of decrease (mol/L) (mol/L) of [A] (M/s) 5.0 5.0 X 10.0 5.0 2X 5.0 10.0 2X Time (s) [B] (mol/L) 10.0 100 20.0 100 30.0 100 62. The rate law for the reaction is Rate = k[A]x[B]y. What are the values of x and y? A) x = 0 y = 1 B) x = 1 y = 0 C) x = 1 y = 1 D) x = 2 y = 1 E) x = 1 y = 2
To determine the rate law for the reaction A + B -> products, we need to examine how the rate of the reaction changes as the concentrations of A and B change. From the given data, we can see that when the concentration of A is doubled, the rate of the reaction also doubles. Similarly, when the concentration of B is doubled, the rate of the reaction also doubles. This indicates that the rate of the reaction is directly proportional to the concentrations of both A and B.
Based on this information, the rate law for the reaction can be expressed as Rate = k[A]*[B], where k is the rate constant. The exponents x and y in the rate law represent the order of the reaction with respect to A and B, respectively. Since the rate of the reaction is directly proportional to the concentrations of both A and B, the exponents x and y would both be equal to 1.
Therefore, the values of x and y are C) x = 1 and y = 1.
How many moles are there in 9.115 grams of HCI?
I do not know, i just need points :/
Which is an example of a fission reaction? Check all that apply.
Superscript 3 subscript 1 upper H plus superscript 3 subscript 1 upper H right arrow superscript 4 subscript 2 upper H e plus 2 superscript 1 subscript 0 n.
Superscript 239 subscript 94 upper P u plus superscript 1 subscript 0 n right arrow superscript 144 subscript 58 upper C e plus superscript 94 subscript 36 upper K r plus 2 superscript 1 subscript 0 n.
Superscript 241 subscript 95 upper A m plus superscript 1 subscript 0 n right arrow superscript 144 subscript 57 upper L a plus superscript 95 subscript 38 upper S r plus 3 superscript 1 subscript 0 n.
Superscript 13 subscript 6 upper C plus superscript 1 subscript 1 upper h right arrow superscript 14 subscript 7 upper N.
Answer:
the answer is b and c.
Explanation:
got it right on edge 2021
An example of a fission reaction is as follows:
²³⁹Pu₉₄ + n¹₀⇒¹⁴⁴Ce₅₈ + ⁹⁴Kr₃₆ + ¹n₀
²⁴¹Am₉₅ + ¹n₀ ⇒ ¹⁴⁴La₅₇ + ⁹⁵Sr₃₈ + ¹n₀
What is a fission reaction?A fission reaction is a type of nuclear reaction in which the nucleus of an atom is split into two or more smaller nuclei, along with the release of a large amount of energy and several neutrons. This process occurs when the nucleus of an atom absorbs a neutron and becomes unstable, causing it to split apart.
Fission reactions can occur naturally, as in the decay of certain radioactive isotopes, or can be induced by bombarding a nucleus with high-energy particles.
Fission is also the process used in nuclear power plants to generate electricity, where the heat produced by the fission reaction is used to produce steam that drives turbines.
Thus, options B and C are correct.
To learn more about the fission reaction, follow the link:
https://brainly.com/question/6572079
#SPJ3
QUIZ 5: CHAPTER REVIEW The nuclear product of radioactive decay is called the daughter nuclide. True False
The nuclear product of radioactive decay is called the daughter nuclide.
True
What is radioactive?Radioactivity is a phenomenon in which particles such as alpha, beta and gamma rays are emitted from unstable atomic nuclei. This is due to the fact that the nucleus is unstable and requires a rearrangement of its protons and neutrons. Radioactive isotopes can be found in nature, or they can be artificially created. Radioactivity has many useful applications, such as medical imaging, cancer treatments, smoke detectors, and nuclear energy. It also has some potential dangers, such as radiation exposure and the risk of nuclear disasters.
To learn more about radioactive
https://brainly.com/question/25750315
#SPJ4