*15 points* will give brainliest

Yazmin is collecting data for her environmental science class. She catalogued all the trees in an acre of the nature preserve. She found 8 oak trees, 4 pecan tree, 2 crepe myrtle trees, and 2 magnolia trees. If the nature preserve covers 280 acres, how many pecan trees are likely to be in the park?​

Answer:

Step-by-step explanation:

The smallest possible multiple of 13 dollars greater than 500 dollars would be 507 which is 13*39 (i assume you mean whole numbers when you say positive numbers, if not the other answer would be 13*38.461)

Therefore, By using the formula actual distance = (Map distance) x (Scale ratio) the actual distance of 20 cm on the map of 1:32000 is 0.000625 km or 625 meters.

A ratio scale is a numerical scale with a genuine zero and uniform distances between adjacent points. The Kelvin scale is an illustration of a ratio scale. The actual zero point exists on a Kelvin scale.

Two locations that are close to one another are said to be adjacent points.

A scale of 1:32000 means that one unit of measurement on the map represents 32000 units of the same measurement in the real world.

To calculate the actual distance of 20 cm on the map,

We know,

Actual distance = (Map distance) x (Scale ratio)

Actual distance = (20 cm) x (1/32000)

Actual distance= 20/32000

Actual distance = 0.000625 km or 625 meters.

To know more about the scale of a map visit: https://brainly.com/question/29495583

#SPJ1

One way to solve a system of 3 equations with 3 variables is to use Gaussian elimination or Gauss-Jordan elimination method.

Gaussian elimination method:

The steps for Gaussian elimination are as follows:

Gauss-Jordan elimination method is similar to Gaussian elimination, however in the final step, it converts the matrix into a Reduced Row Echelon Form (RREF) which leads to more easily solving the system of equations.

Learn more about Gauss-Jordan elimination method here:

https://brainly.com/question/12090959

#SPJ4

Answer:

scale factor = 3

Step-by-step explanation:

since the origin is the centre of dilatation then the scale factor is the ratio of corresponding coordinates, image to original.

given D (12, - 4 ) and D' (36, - 12 ) , then

scale factor = [tex]\frac{36}{12}[/tex] = [tex]\frac{-12}{-4}[/tex] = 3

Answer:

yea yea

Step-by-step explanation:

Answer:

288

Step-by-step explanation:

8x12x3

The minimum value of the given quadratic equation is 31/8. Solved using graph method to find a minimum value that is c - b^2/4a.

By graphing the equation and locating the minimum point on the graph, you may visually determine the minimum value. The graph's vertex will have the lowest y-value. When you have a graphing calculator that can perform the majority of the work for you, this is very simple.

A graph makes it simple to determine the minimum value of a quadratic equation. One can use the graph to identify the minimum point of the quadratic equation and to find the minimum value in a visual way. If the quadratic equation is written as [tex]y= ax^2 + b*x + c[/tex]one can follow the equation that says the minimum value is min = c- (b^2/4a) to obtain the minimum value of the quadratic equation.

Given Quadratic equation is y = 2x^2 + 3x + 5

a = 2 , b =3 ,c = 5.

Minimum value  = c - (b^2/4a)

= 5 - 9/8

=31/8.

To know more about the minimum value of quadratic here:

https://brainly.com/question/24973269

#SPJ4

Answer:

11=z put the slash line in the equal sign

hope this helps

have a good day :)

Step-by-step explanation:

If the sum of three numbers is 50, it forms a linear equation that is x + y + z = 50. By solving this equation we can get the value of x, y and z.

The Equation is a mathematical statement with an 'equal to' symbol between two expressions that have equal values. There are different types of equations like linear, quadratic, cubic, etc. There are numerous ways in which one may define an equation. In its simplest form in algebra, the definition of an equation is a mathematical statement that shows that two mathematical expressions are equal. The most basic and simple algebraic equations consist of one or more variables in math.

The sum of three number is 50 the first number is twice the second number the third number is half the first number.

x + y + z = 50

x = 2y

z = x / 2

Here we form a linear equation. A linear equation may have more than one variable. A linear equation is an equation in which the highest power of the variable is always 1. It is also known as a one-degree equation. By solving this linear equation we can get the value of x, y and z.

To know more about Linear equation please visit:

https://brainly.com/question/12788590

#SPJ4

Answer:

Step-by-step explanation:

i think you should use the graph it will help you to get your answer and see what’s the slope

Equivalence Relation is a type of Relation that satisfies the property of Reflexive , Symmetric and Transitive , and an example of such relation is [tex][(1, 1), (1, 3), (2, 2), (2, 4), (3, 1), (3, 3), (4, 2), (4, 4)][/tex] .

What is an Equivalence Relation ?

A relation R on a set A is can be called as an equivalence relation if and only if the relation is reflexive, symmetric and transitive.

It is a relationship on the set which is represented by symbol “∼”.

(i) Reflexive: A relation is termed as reflexive, if [tex](a, a) \in R[/tex], for every [tex]a \in A[/tex].

(ii) Symmetric: A relation is termed as symmetric, if [tex](a, b) \in R[/tex] , then [tex](b, a) \in R[/tex] .

(iii) Transitive: A relation is termed as transitive if [tex](a, b) \in R[/tex] and [tex](b, c) \in R[/tex], then [tex](a, c) \in R[/tex] .

An Example of Equivalence Relation is [tex][(1, 1), (1, 3), (2, 2), (2, 4), (3, 1), (3, 3), (4, 2), (4, 4)][/tex] because ;

(i) [tex][ (1, 1),(2, 2), (3, 3), (4, 4) ] \in R[/tex] , So , R is Reflexive .

(ii) [tex](2,4) \in R[/tex] and [tex](4,2)\in R[/tex] , Thus ,  relation given by R is Symmetric .

(iii) [tex](3,1) \in R[/tex] and [tex](1,3) \in R[/tex] ⇒ [tex](3,3) \in R[/tex] , So R is Transitive .

Therefore , the Relation given by R is Equivalence Relation .

The given question is incomplete , the complete question is

What is Equivalence Relation and its Example ?

Learn more about Relation here

https://brainly.com/question/14307463

#SPJ4

Answer:

d. interquartile range

Step-by-step explanation:

the iqr measures the first, second, and third quartile, and the median.

Answer:

1.

Step-by-step explanation:

We are trying to find out what is equal to 2(10x+4y)

2(10x+4y)

because 2 times 10x is 20x,  4y times 2 is 8y!

Answer:

Part A

2 hours 10 minutes

Part B;

Please find attached a number line created with MS Visio

Part C

The completed explanation is given as follows

The second showing starts at 7:35 p.m. The movie lasts 2 hours 10 minutes so it ends 9:45 p.m. So the second sowing be over by 9:45 p.m

Step-by-step explanation:

Part A

The given parameters are;

The time the first showing starts, t₁ = 4:35 p.m.

The time the first showing starts, t₂ = 7:15 p.m.

The time interval between shows, [tex]t_{interval}[/tex] = 1/2 hours = 30 minutes

Let 'x' represent the video in minutes, we have;

x = 7:15 - 4:35 - 30 = 2 hours 40 minutes - 30 minutes = 2 hours 10 minutes

The length of the video = 2 hours 10 minutes

Part B;

Using the number line, we have;

1) Plotting the points for the starting and  points for the two showing points which are 4:35 pm. and 7:15 p.m.

2) Plot the point 30 minutes before the start of the second movie which is 6:45 p.m and find the time difference between the start of the first showing and the point 6:45 p.m. which gives the length of the movie which is 2 hours and 10 minutes

3) Given that the second showing starts 20 minutes late, the second showing will start at 7:15 p.m. + 20 min = 7:35 p.m.

4) The second showing ends at 7:35 p.m. + 2 hours 10 minutes = 9:45 p.m.

Therefore, the second showing will be over 9:35 p.m.

Part C

The second showing starts at 7:35 p.m. The movie lasts 2 hours 10 minutes so it ends 9:45 p.m. So the second sowing be over by 9:45 p.m.

The answers to each part of the question are mentioned above.

        y = a(x – h)² + k    or     x = a(y – k)² +h.

        where - (h, k) denotes the vertex.

Given is the equation of a parabola as -

(x - 1)² = y + 2​

We can write the equation as -

y = (x - 1)² - 2

        [tex]$y=\frac{1}{4 \left(f - k\right)} \left(x - h\right)^{2} + k[/tex]

        [tex]$y=\frac{1}{4 \left(\frac{-7}{4} - (-2)\right)} \left(x - h\right)^{2} + k[/tex]

        - 2 - (- 7/4) = d - (- 2)

        d = - 9/4

        y = d

        y = -9/4

Therefore, the answers to each part of the question are mentioned above.

To solve more questions on parabolas, visit the link below -

brainly.com/question/7835414

#SPJ1

Answer:

Given:

Cost of doughnut at one shop = £1.40

Unknown:

Difference in the cost of doughnuts at the two shops = ?

To find the difference in the cost of doughnuts at the two shops, we must know the cost of doughnut at the second shop;

 Given that the cost of doughnut at the other shop is 20% more;

      = 1.20 x £1.4

      = £1.68

The difference in the cost of doughnuts  = £1.68 - £1.40 = £0.28

So the answer is £0.28

Answer:

If the donut cost 1.80 at the first shop it will cost 2.07 at the second shop. the difference is 27 cents

1.80×15%=.27

1.80+.27=2.07

Answer:

Table A: f(x) = -4x - (-5)

Table B: f(x) = 4x + ⅖

Table C: f(x) = -4x + (-⅕)

Step-by-step explanation:

See explanation in the attachement below

Answer:

dr. potter provides 54 vaccinations TOTAL (including both measles and polio).

p+m=54

since there are 4 doses of polio and of measles, you have to use a variable to distinguish how many doses were given for measles and polio out of 142 given doses.

4p+2m=142

p+m=54

4p+2m=142

^^system of equation

p+m=54

4p+2m=142

p=54-m

4p+2m=142

(substitute 54-m to the equation)

4(54-m)+2m=142

m=37

(collect like terms, then substitute the value of m into the first equation)

p=54-37

p=17

(m, p)=(37, 17)

Step-by-step explanation:

i hope this helps, sorry for the wait

If Joseph collects data from 186 students from a medium sized school in Iowa and finds that only 11% students has reported rate of bullying , then the 95% confidence interval is option (b) [tex](10.353, 11.647)[/tex] .

the students who report bullying  in middle sized school is ⇒ [tex]15[/tex] percent ;

the standard deviation is given as ⇒ 4.5% = 0.045 .

the sample size is ⇒ 186 students ;

the sample proportion is ⇒ 11% = 0.11 .

we know that the for the 95 percent confidence interval the value of z score is 1.96   .

The formula to calculate the upper and lower limit of 95 percent confidence interval is :

= [tex]( Sample Proportion \pm \frac{Zscore \times Standard Deviation}{\sqrt{Population Size} })[/tex]

So , the lower limit of the interval will be calculated as :

= [tex]( 0.11 - \frac{1.96 \times 0.045}{\sqrt{186} })[/tex]

On simplifying ,

we get

= [tex]0.1035[/tex] = [tex]10.35\%[/tex] ;

So , the upper limit of the interval will be calculated as :

= [tex]( 0.11 + \frac{1.96 \times 0.045}{\sqrt{186} })[/tex]

On simplifying ,

we get ;

= [tex]0.1165[/tex] = [tex]11.65 \%[/tex]

Therefore , the required interval is [tex](10.353, 11.647)[/tex].

The given question is incomplete , the complete question is

According to a "how to stop bullying" Web site, 15% of students report experiencing bullying one to three times within the most recent month. Let's assume the standard deviation is 4.5% of students. Joseph collects data from 186 students at a medium-sized school in Iowa and finds that only 11% reported this rate of bullying. What is his 95% confidence interval ?

(a) (8.75, 13.25)

(b) (10.353, 11.647)

(c) (10.5, 19.5)

(d) (6.5, 15.5)

Learn more about Confidence Interval here

https://brainly.com/question/15871705

#SPJ4

Answer:

See below.

Step-by-step explanation:

[tex]\frac{dy}{dx}+\frac{y}{x^2}=\frac{1}{x^2}\\\\\frac{dy}{dx}=\frac{1}{x^2}-\frac{y}{x^2}\\\\\frac{dy}{dx}=\frac{1-y}{x^2}[/tex]

The first step could be more complicated if the fractions didn't already have a common denominator.

Answer:

144 ounces.

Step-by-step explanation:

Since 1 pound=16 ounces, we will multiply 9 times 16.

9x16=144

Therefore, the answer is 144 ounces.

Answer:

I'm pretty sure the answer is J

The ratio tells us how often one number is contained in another. In the class, there are six girls for every five boys. D is the right answer.

A ratio is an ordered pair of numbers a and b, expressed as a / b, where b is not equal to 0. A percentage is an equation in which two ratios are made equal to one another. For instance, you could express the ratio as 1: 3 if there is 1 guy and 3 girls (for every one boy there are 3 girls) One-fourth are boys and three-fourths are girls.

The ratio tells us how often one number is contained in another.

Considering that 96 of the 176 junior students are female. Consequently, the class's gender distribution is,

96 girls are present.

80 boys out of 176, or 96 boys.

Currently, the junior class's gender distribution is as follows:

Girls to Boys in Ratio

96 girls and 80 boys.

Divide the numerator and denominator by 16 to simplify.

Boys/Girls: 6 to 5.

Therefore, the answer is option d) 6:5.

To learn more about ratio refer to:

https://brainly.com/question/2914376

#SPJ4

Answer:

40%

Step-by-step explanation:

Answer:

50%

Step-by-step explanation:

it's half

Answer:

5,000 is half of 10,000

Step-by-step explanation:

5,000 x 2 = 10,000

10,000 divided by 2 = 5,000

5,000 plus 5,000 = 10,000

Answer:

g(- 6) = 11

Step-by-step explanation:

substitute x = - 6 into g(x) , that is

g(- 6) = - (- 6) + 5 = 6 + 5 = 11

Answer:

11

Step-by-step explanation:

g(x) = -x + 5

Let x = -6

g(-6) = -(-6) + 5

         =6+5

         =11

The number that can be used to complete the area model is 210 and it can be used with numbers that are dragged are 100,100,10 bearing in mind that numbers may be used more than once

We already know that we have 14 colored tiles and that each of the area models is represented by 15 colored kits

The number of colored tiles in 15 kits is 210.

To find the total number of kits to use to complete the area model, you can multiply the number of tiles per kit (14) by the number of kits (15):

14 x 15 = 210

Learn more about multiplication here: https://brainly.com/question/10873737

#SPJ4

Answer:

-3 (x - 4) (x - 1)

Step-by-step explanation:

Check the picture below.

Answer:

c. x=9 or x=-9

Step-by-step explanation:

i hope this helps :)

Answer: C

Begin by dividing 4 on both sides to get [tex]x^{2}[/tex]=81. When a term is squared, that basically means you need to square root the equation. This would equal [tex]\sqrt{x^{2}[/tex]=[tex]\sqrt{81}[/tex]. Square rooting cancels out the x^2, leaving it as x=[tex]\sqrt{81}[/tex]. This also refers to 9,-9. (Keep in mind that when you're square rooting a number, you should always consider both positive and negative.)