Answer:
Explanation:
The reaction is violent but safe, provided the procedure is followed exactly. ... Chemicals. Magnesium powder (HIGHLY FLAMMABLE), 0.25 g (note 4); Copper(II) oxide powder ... top must NOT be hot when the magnesium powder/copper oxide mix is added. ... After one or two minutes (be patient) a vigorous reaction occurs.
How is a beta particle formed?
Answer:
forms when a neutron changes into a proton and a high-energy electron .
hope this helps <3
How many moles are there in 8.94*10^24 atoms P?
Answer:
14.85 molesExplanation:
To find the number of moles in a substance given it's number of entities we use the formula
[tex]n = \frac{N}{L} \\[/tex]
where n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
From the question we have
[tex]n = \frac{8.94 \times {10}^{24} }{6.02 \times {10}^{23} } \\ = 14.850498[/tex]
We have the final answer as
14.85 molesHope this helps you
I will brainless who can answer this all pleaseeeeej
at the end of the isomerization reaction, what chemical is used to quench the residual bromine?
Answer:
They are constitutional isomers and diastereomers.
Someone help me with this pls
Answer:
D
Explanation:
Lamps
Helpp meeee the picture is above.
Answer:
a) 2.7 g cm³
b) 10.2 g
Explanation:
a) Density = Mass/Volume
= 21.6/8.00
= 2.7 g cm³
b) Mass = Volume × Density
= 2.55 × 4.0
= 10.2 g
Max Plank created the idea of quanta4 or quantum energy. This is?
Answer:
A theory of physics in which energy exists only in discrete quantities, called quanta. It was originated in 1900 by the German physicist Max Karl Ernst Ludwig Planck (1858–1947), who suggested that electromagnetic radiation is quantized, i.e. it can be emitted or absorbed only in tiny packets, not continuously.
Explanation:
why does the reaction of anthracene with maleic anhydride needs to be kept away from water?
Answer:
Water separates the two reactants into two layers, stopping the reaction.
Explanation:
Maleic anhydride can and will react with water.
The reaction between maleic anhydride and anthracene is a Diels Alder reaction. This type of reaction is a cycloaddition reaction.
What is Diels Alder reaction?The Diels Alder reaction is a member of a class of reactions called cycloadditions. This reaction involves three pi bonds, two from the diene and one from the dienophile in a concerted reaction to give a six-membered ring.
Since this reaction involves four pi electrons in the diene and two pi electrons from the dienophile, it is sometimes referred to as a 4+2 cycloaddition.
The presence of electron donating groups on the diene and the electron withdrawing groups on the dienophile favors normal Diels Alder reactions. The reaction involves the formation of new σ bonds which are energetically more stable than π bonds.
Anthracene can react with water, breaking the center ring. Maleic anhydride can react with water, opening its ring. The reactants get seperated into two layers by water and thereby stops the reaction.
To know more about Diels Alder reaction, visit;
https://brainly.com/question/29972519
#SPJ6
Elements have different properties because they are made up of different types of
atoms.
Right a 5 sentence paragraph explaining this!!!
Answer:
,
Explanation:
Answer:
An atom is the smallest partical in the universe that makes up everything you see around you. Every chemical element is also made up of atoms. Since atoms are what give each element their defining characteristics, each element can be composed of multiple atoms but you must have all of the same type of atoms combined in order for it to be considered an element. For example the element gold can only contain gold atoms. If you mix the atoms of one element with the atoms of another your substance has then been changed from an element to a compound.
Explanation:
The volume of a bottle is 500cm. what is the volume of the bottle in millimeters
Answer:
5000mm
Explanation:
10mm makes 1 cm
so if we compare them:
10mm-->1cm
x -->500cm
now cross multiply:
1x-->5000
divide both sides by 1 for x to be alone
therefore we get x=5000
how do the melting points of enantiomers compare to each other? how do the melting points of diastereomers compare to each other?
Melting points of enantiomers will not compare to each other as they have same M.P. and Diastereoisomers are compared on the basis of melting point.
What are steroisomers?Stereoisomers are those isomers which are having the same molecular formula but different spatial arrangemet of atoms within the molecule.
Enantiomers: Enantiomers are pair of two stereoisomers which are having mirror image of each other, but are not superiposable. They have the same melting point so we can not compare enantiomers on the basis of their melting point.Diastereoisomers: Diastereoisomers are pair of those stereoisomers which are not having mirror image of each other, but are superimposable.They have different physical and chemical properties, so it can be compared on the basis of melting point.Hence, only diastereoisomers are compared on the basis of melting point.
To know more about stereoisomers, visit the below link:
https://brainly.com/question/7063755
What is the last step in the scientific method?
Answer:
D. Communication of results
Answer:
b.
conclusion
because it gives the overall information about the experiment
what is the difference between essential and nonessential amino acids
Answer:
Simply put, essential amino acids are amino acids that cannot be made by the body. These amino acids must come from a person's diet, as the human body lacks the metabolic pathways required to synthesize these amino acids. ... Nonessential amino acids do not need to come from the diet.
Explanation:
hope it helps you
How do the coefficients in a balanced equation compare quantities of two
substances?
A. The coefficient of the reactant tells how many product molecules
will form,
B. The ratio of the coefficients equals the ratio of the masses of the
substances,
C. The sum of the coefficients of the reactants equals the sum of the
products,
D. The ratio of the substances' coefficients equals the ratio of their
numbers of moles,
Answer:
D. The ratio of the substances coefficients equals the ratio of their numbers of moles.
What is the density of an object having a volume of 8 ml and a mass of 22 grams?
Answer:
0.32gcm3 . I miss the old Kanye, straight from the 'Go Kanye
Chop up the soul Kanye, set on his goals Kanye
I hate the new Kanye, the bad mood Kanye
The always rude Kanye, spaz in the news Kanye
I miss the sweet Kanye, chop up the beats Kanye
I gotta to say at that time I'd like to meet Kanye
See I invented Kanye, it wasn't any Kanyes
And now I look and look around and there's so many Kanyes
I used to love Kanye, I used to love Kanye
I even had the pink polo, I thought I was Kanye
What if Kanye made a song about Kanye
Called "I Miss The Old Kanye, " man that would be so Kanye
That's all it was Kanye, we still love Kanye
And I love you like Kanye loves Kanye
Explanation:
Answer:
2.75
Explanation:
D= [tex]\frac{mass}{volume}[/tex]
[tex]\frac{22}{8}[/tex]= 2.75
Hope this helps!
in which direction on the periodic table does metallic character increase?
Answer:
Metallic character increases down each Group of the Table as the outer electrons are further from the nucleus and require less energy for their removal. (a) metallic character decreases from left to right in each Period.
Explanation:
The metallic character increases down each Group on the periodic table.
The metallic character decreases from left to right in each Period.
What is periodic table ?The chemical elements represents in tabular form.The elements in periodic table arranged on the basis of increasing atomic masses.The interactive periodic table showing name, atomic number, atomic mass, boiling point, melting points , state of matter etc.What is metal and its metallic character?The elements having strong tendency to loss their electrons is called metals.The metals have characteristics of ductile, malleability, The metallic character refers to reactivity of metals.learn about metallic character,
https://brainly.com/question/16940676
#SPJ2
Salt from evaporated seawater has been formed from
O a. artifical means
O b. solution
O c. volcanoes
O d. magma
Answer:
a
Explanation:
its formed from sodium and sodium metal is produced by electrolysis of dry molten sodium chloride.
1. What are the 5 characteristics a substance must have in order to be a mineral
Answer:
A mineral has to be naturally occurring, inorganic, solid, have a crystal structure, and have a definite chemical composition.
Explanation:
who wanna ft on snap? I'm a guy btw
hahahaha your a guy
Explanation:
brainliest me please
um I don't know just thanks :(
Answer:
i think it would be answer D
Explanation:
what is the acceleration due to gravity of the moon
Is this statement true or false?
The products of a chemical reaction have the same properties as the reactants.
true
false
Answer:
The answer is B. False
Explanation:
A mixture that you eat with at least 6 compounds in it
Answer:
Coloured candies?
Explanation:
Do you have more human cells or
bacteria cells in your body?
7th grade Sem 1
13.2.6 Quiz: Chemistry of Life
Question 3 of 5
Which substance used during photosynthesis does a plant take in from the
soll?
A. Water
O
B. Sugars
C. Proteins
D. Oxygen
SUBMIT
Answer: Water
Explanation: During photosynthesis, plants take in carbon dioxide (CO2) and water (H2O) from the air and soil
PLS HELP ASAP!
How many years?
The radioactive isotope carbon-14 is used for radiocarbon dating. The half-life of carbon-14 is 5.73×103 years.
A wooden artifact in a museum has a 14C to 12C ratio that is 0.745 times that found in living organisms. Estimate the age of the artifact.
use graph
Answer:
about 5 years i think
Explanation:
I've tried all the methods i know
it's about 5 years
hope it helps
The age of the artifact is equal to 2.5 × 10³ years when the half-life of carbon- 14 is 5.73 × 10³ years.
What is the half-life period?The half-life of a radioactive element is defined as the time that is required to decrease the original quantity of a radioactive isotope to half after decay.
The half-life of a radioactive isotope is the feature of the element and does not depend upon the actual amount of the radioactive isotope.
Given, the ratio of the initial and left amount of ¹⁴C is :
N = 0.745 N₀
The half-life period of the ¹⁴C isotope = 5.73 × 10³ years
The rate constant of the decay of radioisotope can be calculated from the below-mentioned formula:
[tex]\displaystyle k=\frac{0.693}{t_{1/2}}[/tex]
[tex]\displaystyle k=\frac{0.693}{5.73 \times 10^3}[/tex]
k = 0.123 × 10⁻³ yr⁻¹
The age of the artifact can be calculated as:
[tex]\displaystyle t =\frac{2.303}{k} log\frac{N_0}{N}[/tex]
[tex]\displaystyle t =\frac{2.303}{0.123\times 10^{-3}} log\frac{N_0}{0.735 N_0}[/tex]
t = 2.5 × 10³ years
Learn more about the half-life period, here:
brainly.com/question/14521252
#SPJ2
what is the purpose of the dts other auths and pre audits screen?
Answer:
It allows the traveler to justify questionable expense items.
hope that helped <3
Magnesium is in Group 3. Strontium is in group 5. Which element do you predict will be less reactive in water?
Answer:
Strontium
Explanation:
strontium will be less reactive because reactivity decreases down the group
A compound is a hydrate when it
When you use a simple machine to do work, ________.
A
distance increases and force decreases
B
distance and force both increase
C
distance and force both decrease
D
distance decreases and force increases
Answer:
distance decreases and force increases
Explanation:
Simple machine means less power Hence it will require more force.Hence distance will decrease with respect to force and force will decreaseWhen we use a simple machine to do work, the distance decreases, the force increases. Hence, option D is correct. Because, these parameters are in inverse proportion.
What is force?Force is an external agent acting on a body to change its motion. There are various kinds of force such as frictional force, magnetic force, gravitational force etc.
Work done is the effectiveness of the machine to use the force to make the maximum displacement. Work done is the product of force and distance.
W = F.ds
As per this relation, the force acting on large distance makes greater work done. However,
F = W/ds.
Hence, as the distance increases, the force is decreasing. Therefore, option D is correct.
Find more on work done:
https://brainly.com/question/13662169
#SPJ3