10.
Given the following reaction
Ca(s) + 2HCl(aq) → CaCl2(aq) + H2(g)
If 1.00 g of Ca reacts with 1.00 g HCI and 1.21 g CaCl2 are produced, what is the theoretical yield, the percent
yield and the limiting reactant?
a. 2.77 g, 43.7%, Ca limiting
b. 2.77 g, 79.5%, HCI limiting
c. 1.52 g, 43.7%, Ca limiting
d. 1.52 g, 79.5% HCI limiting
e. 2.77g, 54.9%, Ca limiting
f. 1.52 g, 54.9%, HCI limiting

The ethyl ester precursor that undergoes a Claisen condensation is an aliphatic acid. It is a compound containing a carboxylic acid functional group (-COOH) attached to an alkyl group.

Here, correct option is A.

An example could be ethylacetic acid (2-ethoxyacetic acid) which has a molecular formula of C4H8O2. In a Claisen condensation, the carboxylic acid group of the acid will react with an alcohol in the presence of a base catalyst to form an ester.

This ester can then undergo saponification, wherein it is hydrolyzed with aqueous base to form an alkoxide salt, followed by decarboxylation to form an alkene. The overall reaction for this would be:

C4H8O2 + C2H5OH --> C4H7O2C2H5 + H2O

--> C4H8O2 + NaOH --> C4H7O2-Na+ + H2O

--> C4H7O2-Na+ --> C4H8 + CO2

In summary, an aliphatic acid such as ethylacetic acid can undergo a Claisen condensation with an alcohol, followed by saponification and decarboxylation to form an alkene.

Therefore, correct option is A.

Know more about saponification here

https://brainly.com/question/2263502#

#SPJ11

Complete question is :-

the following compound can be prepared by a claisen condensation followed by saponification and decarboxylation. propose a structural formula for the ethyl ester precursor that undergoes a claisen condensation.

A. aliphatic acid

B. acetic acid

C. hydrochloric acid

D. none

The statement is True.

The entropy of a system is a measure of the disorder or randomness of its particles. The greater the number of possible arrangements of particles, the greater the entropy.

In this case, NO₂(g) has a higher entropy than N₂O4(g) because it has more possible arrangements of particles. NO₂(g) is a brownish-red gas, composed of two different atoms (nitrogen and oxygen), and its molecules are bent in shape. On the other hand, N₂O₄(g) is a colorless gas composed of two identical N₂O₂ molecules, which are linear in shape.

The different compositions and shapes of the molecules in NO₂(g) result in a larger number of possible arrangements of particles than in N₂O₄(g). Therefore, 1 mole of NO₂(g) has a greater entropy than 1 mole of N₂O₄(g), making the statement true.

To learn more about entropy refer to:

brainly.com/question/15025401

#SPJ4

By synthetic examination, the composition of potassium phosphate is 55.19% K, 14.63% P, and 30. 19% O.

Percent composition lets you know which sorts of particles (components) are available in an atom and their levels. Percent composition can likewise educate you concerning the various components present in an ionic compound too.

We should check two models out

The molar mass of

[tex]H_{2}O[/tex] is 18 g/mol

The hydrogens make up 2g (since every mole of hydrogen is 1g)

The oxygen makes up 16g.

The percent composition of the compound is:

H = (2g/18g) x 100 = 11.1%

O = (16g/18g) x 100 = 88.9%

Percent composition can be determined by the substance recipe of a compound, or it tends to be resolved tentatively.

Percent composition from exploratory information for a response of iron and oxygen which creates an iron oxide compound.

Potassium is the synthetic component with the image K (from Neo-Latin kalium) and nuclear number 19. A gleaming white metal is sufficiently delicate to cut with a blade without any problem.

to know more about molar mass click here:

https://brainly.com/question/837939

#SPJ4

Zeolites are microporous crystalline aluminosilicate materials. Zeolites chelate PAHS by forming permanent covalent bonds is one of the misrepresentations. So, this statement is false one.

Zeolites are minerals such as sodium, potassium, calcium or magnesium aluminosilicates, which have a porous structure. Commonly used as commercial adsorbents, catalysts and water softener and ion exchange chromatography.

They are mainly composed of silicon, aluminum and oxygen, and the general formula is Mn+1/n(AlO₂)−(SiO₂)x･yH₂O.

Chelation refers to the formation of coordination compounds to prevent the normal behavior of ions in solution. Zeolites do not chelate PAHs by forming permanent covalent bonds, but by forming coordination complexes.

Zeolites do not chelate PAHs by forming permanent covalent bonds, but by forming coordination complexes. Therefore, this statement is incorrect.

For more information about zeolite, visit :

https://brainly.com/question/31115830

#SPJ4

The formula for Ka  is used to determine the mass of benzoic acid that is needed to be dissolved in a 350.0 mL of water to produce a solution with a pH = 2.85 and Ka=6.3*10^-5.

given :

Ka = [H3O+][C6H5COO-]/[C6H5COOH]

Since the pH is known, we can use the equation pH = -log[H3O+] to find the concentration of hydronium ions in the solution.

2.85 = -log[H3O+] [H3O+] = 5.01 × 10-3 M

We assume that the benzoic acid fully dissociates so that [C6H5COO-] = [H3O+] and [C6H5COOH] - [H3O+]

Substituting the values into the formula gives

Ka = [5.01 × 10-3][5.01  10-3]/[C6H5COOH] Ka = 2.51  10-5M1, so we will solve for [C6H5COOH].

Rearranging the equation for Ka, we obtain [C6H5COOH] = [H3O+]. 2 /[C6H5COO-] 2.51 × 10-5 = (5.01 × 10-3)2 / [C6H5COOH] [C6H5COOH] = (5.01  10-3) 2 / (2.51 × 10-5) = 1003.98 M

As the solution requires the presence of benzoic acid in 350.0 mL of water,

We will use the equation:

Mass = (molarity) (molecular mass) (volume) Mass = (1003.98) (122.12 g/mol) (0.3500 L) Mass = 43.4 g

The mass of benzoic acid that would dissolve in 350.0 mL of water to produce a solution with a pH of 2.85 is 43.4 g.

To know more about the Ka https://brainly.com/question/16035742

#SPJ11

If salt A has a greater solubility in water than salt B we can say that the Ksp value of salt A is greater than the Ksp value of salt B.

Solubility product constant (Ksp) is a measure of the solubility of an ionic compound in water. The Ksp value is dependent on the nature of the compound and the conditions under which it is dissolved. A higher Ksp value indicates that the compound is more soluble in water.

If salt A has a greater solubility in water than salt B, it means that salt A has a higher concentration of dissolved ions in water compared to salt B. This implies that the Ksp value of salt A is greater than the Ksp value of salt B, as a higher concentration of ions in solution requires a higher Ksp value to maintain equilibrium.

Therefore, we can conclude that the solubility of salt A is greater than salt B, and that the Ksp value of salt A is greater than the Ksp value of salt B.f f s

To know more about Ksp value, refer here:

https://brainly.com/question/12961072#

#SPJ11

The pH ranges for bromothymol blue are: pH 6.0 or less: Yellow, pH 6.0 to 6.8: Green, pH 6.8 to 7.6: Blue, pH 7.6 to 8.4: Greenish-Blue, pH 8.4 to 9.6: Blue-Green, and pH 9.6 or higher: Blue.

Bromothymol blue is a pH indicator that changes color over a pH range of 6.0 to 7.6. At pH 6.0, the color of the solution turns yellow, indicating an acidic solution. At pH 7.6, the color of the solution turns blue, indicating a basic solution.

The pH range between 6.0 and 7.6 is considered neutral, so the color of the solution is green. A solution with a pH of exactly 7.0 will appear green when bromothymol blue is added to it. As the pH of the solution changes, the color of the solution will change as well, providing an easy way to determine the pH of a solution.

The color changes that occur with the use of bromothymol blue can be used to determine the acidity or basicity of solutions. The use of pH indicators like bromothymol blue is important in many areas of science, including medicine, biology, and environmental science.

For example, in medicine, the pH of blood is important to determine the health of the individual. Blood has a pH range of 7.35-7.45, and pH indicators like bromothymol blue can be used to determine if blood pH is within the normal range.

To know more about bromothymol blue refer here:

https://brainly.com/question/30471046#

#SPJ11

Spectator ions are ions that are present on both sides of chemical reactions but do not take part in the reaction itself.

An ion known as a spectator ion is one that is present in solution both before and after a chemical reaction but does not participate in it. The chemical equation known as the net ionic equation only displays the substances that are directly involved in the chemical process.

Sulfate, sulphide, and chloride ions react to generate salt out of the supplied ions. While the provided solution's ammonium and nitrate ions remain in their original states.

To know more about spectator visit:-

https://brainly.com/question/4489490

#SPJ1

A vital component of both chemical and biological processes, water is a wonderful substance. Its special characteristics result from the organisation of its molecules and the interactions they have with one another and with other molecules.

Water's ability to generate hydrogen bonds is one of its most significant characteristics. The negative oxygen atom of one water molecule interacts electrostatically with the positive hydrogen atom of another, forming hydrogen bonds. Water has a high surface tension as a result of these connections, which also enable it to form droplets and adhere to surfaces. For the structure and stability of biomolecules like proteins and nucleic acids in biological systems, hydrogen bonding are essential.The solvent water is likewise quite good. Many different polar and ionic chemicals can be dissolved by it because of its polar nature. The cytoplasm of cells and other biological fluids like blood contain it since it is a necessary component.

Learn more about electrostatically here :

https://brainly.com/question/31042490

#SPJ1

In recrystallization, newly formed crystals are washed with cold solvent for several reasons:

To Remove Impurities: The cold solvent helps to remove any remaining impurities that may have been trapped in the crystal lattice during the crystallization process. This helps to increase the purity of the final product.

To Promote Crystal Growth: Washing the crystals with cold solvent helps to promote crystal growth by removing any small crystals or crystal fragments that may have formed during the initial crystallization process. This encourages the formation of larger, more well-formed crystals.

To Improve Yield: Washing the crystals with cold solvent can help to improve the yield of the recrystallization process by removing any remaining solute that may be adhering to the surface of the crystals.

To Prevent Decomposition: Some compounds may decompose if they are exposed to high temperatures or prolonged exposure to solvents. Washing the crystals with cold solvent can help to prevent this by minimizing the time that the crystals are in contact with the solvent.

Overall, washing newly formed crystals with cold solvent is an important step in the recrystallization process, as it helps to increase the purity and yield of the final product.

Learn more about solute here brainly.com/question/30665317

#SPJ4

Alcohol is a compound with a hydroxyl (-OH) group attached to a carbon atom, such as CH₃OH. An acid is a compound with a carboxyl (-COOH) group, such as CH₃COOH.

An aldehyde is a compound with a carbonyl group (-CHO) attached to a carbon atom, such as CH₂O. An amine is a compound with a nitrogen atom attached to one or more carbon atoms, such as H₃CNH₂.

An alkene is a compound with a double bond between two carbon atoms, such as CH₂CH₂. An alkane is a compound with only single bonds between carbon atoms, such as C₃H₈.

The match of the following is as follows:

CHOH - alcohol -OH

CH₃COOH - acid -COOH

CH₂CH₂ - alkene -CH₂

CH₂O - aldehyde -O

H₃CNH₂ - amine -NH₂

C₃H₈ - alkane

To know more about the carbonyl group, visit:

https://brainly.com/question/13564853

#SPJ1

Supersaturated solution is made from a mixture that contains 1115.94 g KCl in 2657 g of water at 30 oC.

To identify the kind of solution produced from a mixture comprising 1115.94 g KCl in 2657 g of water at 30 oC, we must compare the amount of KCl in the solution to the maximum amount of KCl that may dissolve in the water at that temperature, which is provided as 37.0 g KCl/100 g H2O.

First, we need to convert the mass of water to grams of water:

2657 g water x (100 g H2O / 100 g water) = 2657 g H2O

Next, we can calculate the maximum amount of KCl that can dissolve in 2657 g of water at 30 oC:

Maximum amount of KCl = 37.0 g KCl/100 g H2O x 2657 g H2O

Maximum amount of KCl = 981.09 g KCl

Since the amount of KCl in the mixture (1115.94 g) is greater than the maximum amount of KCl that can dissolve in 2657 g of water at 30 oC (981.09 g), the solution is supersaturated.

Learn more about Supersaturated here:

https://brainly.com/question/16817894

#SPJ1

amount of energy needed to heat 3.4 g of a substance from 50.0°C to 80.0°C is 64.0 J then the specific heat capacity of the substance is 0.631 J/g°C.

formula for calculating the amount of energy required to heat a substance

Q = mcΔT

where Q is the energy in Joules (J), m is the mass of the substance in grams (g), c is the specific heat capacity of the substance in J/g°C, and ΔT is the change in temperature in Celsius (°C).

We know that Q = 64.0 J, m = 3.4 g, ΔT = 80.0°C - 50.0°C = 30.0°C.

Substituting these values into the formula, we get:

64.0 J = (3.4 g) * c * (30.0°C)

Solving for c, we get:

c = 64.0 J / (3.4 g * 30.0°C) = 0.631 J/g°C

Energy is a property of objects that can be transferred to other objects or converted into different forms, but cannot be created or destroyed. The SI unit of energy is joule (J). Energy can exist in many forms, such as thermal energy, electrical energy, mechanical energy, nuclear energy, and electromagnetic radiation, among others.

Learn more about specific heat here:

https://brainly.com/question/11297584

#SPJ1

Another form of acid rain is one based around a nitrogen-containing acid, which is nitric acid (HNO₃). Nitrogen dioxide (NO₂) and nitrogen monoxide (NO) gases will react with water to produce this acid.

What is acid rain?

Here are the balanced equations to demonstrate this:

1. Nitrogen monoxide reacts with oxygen to form nitrogen dioxide:
2NO + O₂ → 2NO₂

2. Nitrogen dioxide reacts with water to form nitric acid and nitrogen monoxide:
2NO₂ + H₂O → HNO₃ + NO

These reactions lead to the formation of nitric acid, which contributes to acid rain.

To know more about Acid rain:

https://brainly.com/question/11543614?

#SPJ11

The population of snakes in the forest ecosystem is declining mainly due to habitat destruction.

The global forest cover is deteriorating. Snakes live in these woodlands, which constitute their habitat. Deforestation is the removal of forest layers for purposes unrelated to forests.

The arboreal or tree-dwelling lifestyle is particularly suited to snakes of the rain forest. Many have long, lean bodies with angled belly scales that assist the snakes grasp trees. Other species have 'wings,' allowing the snake to glide to another tree or the ground to avoid predators.

To know more about ecosystem visit:-

https://brainly.com/question/19267717

#SPJ1

Xenon is the most reactive non-radioactive noble gas because it has the lowest ionization energy among the noble gases.

This means that it requires the least amount of energy to remove an electron from a xenon atom, making it more likely to form chemical bonds with other elements, such as oxygen and fluorine.

Xenon also has a relatively large atomic radius, which allows oxygen and fluorine atoms to bond with it without being too crowded. This is important because the noble gases typically do not form chemical bonds with other elements due to their stable electron configurations and small atomic radii.

Additionally, xenon has a higher electronegativity and electron affinity compared to other noble gases, which also contributes to its reactivity. Electronegativity refers to an atom's ability to attract electrons, while electron affinity refers to an atom's tendency to accept electrons. Both of these properties can make an atom more likely to form chemical bonds with other elements.

Overall, the combination of xenon's low ionization energy, large atomic radius, high electronegativity, and electron affinity make it a relatively reactive noble gas, capable of forming compounds with oxygen and fluorine.

To learn more about Xenon refer to:

brainly.com/question/5516586

#SPJ4

The cage size of zeolites is in the centimeters scale. This statement is false.


Zeolites are microporous aluminosilicate minerals that have a framework structure composed of aluminosilicate tetrahedra. these tetrahedra are related together to form a three-dimensional pore shape with uniform size and form. Zeolites are widely used as adsorbents, catalysts, and ion-exchangers due to their particular properties such as excessive floor location, thermal stability, and molecular sieving homes.Cage length of Zeolites are known for his or her uniform pore size and form. the dimensions of the pores in zeolites ranges from 2-10 Å (angstroms), that's too small to be measured in centimeters. consequently, the cage size of zeolites isn't in the centimeters scale, but as an alternative in the angstroms scale.

To understand greater approximately zeolites click on here
brainly.com/question/28588461
#SPJ4

The number-average degree of polymerization of the copolymer is 463.2.

To calculate the mean repeat unit molar mass of poly[ethylene(vinyl acetate)], we can use the following formula:

[tex]Mn = (w_1/M_1) + (w_2/M_2) + ... + (w_n/M_n)[/tex]

where[tex]M_n[/tex] is the mean repeat unit molar mass, [tex]w_i[/tex] is the weight fraction of each repeat unit, and [tex]M_i[/tex] is the molar mass of each repeat unit.

Let's assume that the repeat unit of poly[ethylene(vinyl acetate)] contains two atoms of carbon, four atoms of hydrogen, and one atom of oxygen from vinyl acetate ([tex]C_4H_6O[/tex]) and two atoms of carbon and four atoms of hydrogen from ethylene ([tex]C_2H_4[/tex]). We can calculate the molar mass of the repeat unit as follows:

Molar mass of repeat unit = (2 × atomic mass of C) + (4 × atomic mass of H) + atomic mass of O + (2 × atomic mass of C) + (4 × atomic mass of H) [tex]= (2 * 12.01 g/mol) + (4 * 1.01 g/mol) + 15.99 g/mol + (2 * 12.01 g/mol) + (4 * 1.01 g/mol)[/tex]

= 86.09 g/mol

Now, we can calculate the weight fraction of vinyl acetate repeat units as follows:

Weight fraction of vinyl acetate repeat units = 12.9 wt% = 0.129

Weight fraction of ethylene repeat units = 100% - 12.9% = 87.1 wt% = 0.871

Substituting the values into the formula for [tex]M_n[/tex], we get:

39870 g/mol = (0.129 / 86.09 g/mol) + (0.871 / Methylene)

Solving for Methylene, we get:

Methylene = [tex](0.871 / (39870 g/mol - 0.129 * 86.09 g/mol))^{-1}[/tex]

Methylene = 28.8 g/mol

Finally, we can calculate the number-average degree of polymerization ([tex]DP_n[/tex]) using the formula:

[tex]DP_n[/tex] = [tex]M_n[/tex] / M_repeat unit

[tex]DP_n[/tex] = 39870 g/mol / 86.09 g/mol

[tex]DP_n[/tex] = 463.2

For more question on polymerization click on

https://brainly.com/question/3911071

#SPJ11

Under forward biasing, the processes that occur in the quasi-neutral regions adjacent to the depletion region edges are drift and diffusion.

What is forward biasing?

Forward biasing is the method of turning on a diode by providing a voltage that enables current to flow through the diode.

Quasi-neutral region

Quasi-neutral regions are the areas of a p-n junction diode where there is a substantial concentration of charge carriers on either side of the junction.

The density of charge carriers varies gradually in this area. As a result, the electrons and holes are mutually neutralized, and the region becomes electrically neutral.

In a p-n junction diode, there are two types of regions: the p-type region, which is dominated by holes, and the n-type region, which is dominated by electrons.

When the diode is forward-biased, the negative terminal is connected to the N-region, and the positive terminal is connected to the P-region.

This causes an electric field to develop that pushes the electrons toward the P-region and the holes toward the N-region.

When the applied voltage causes the minority carriers to be pushed across the junction into the opposite region, the carriers cross the depletion area, which is the space-charge region. In a diode, the area on either side of the junction, which is free of any charge carriers, is known as the depletion area or region.

The quasi-neutral regions adjacent to the depletion region edges experience drift and diffusion under forward biasing.

To know more about the quasi-neutral regions https://brainly.com/question/14989140

#SPJ11

H) To produce two H2O molecules, we need four hydrogen atoms and two oxygen atoms ;  I) For oxygen molecules, we need one molecule of O2 to produce two H2O molecules ; J) Two hydrogen molecules react with one oxygen molecule to produce two water molecules

Equations that make use of chemical formulae and symbols to represent chemical reactions are called chemical equations.

H) To produce two H2O molecules, we need four hydrogen atoms and two oxygen atoms. As each hydrogen molecule contains two hydrogen atoms, we need a total of two hydrogen molecules to produce two H2O molecules.

I) For oxygen molecules, we need one molecule of O2 to produce two H2O molecules because each O2 molecule contains two oxygen atoms.

J) "Word equation" for the reaction is: Two hydrogen molecules react with one oxygen molecule to produce two water molecules.

To know more about chemical equation, refer

https://brainly.com/question/23877810

#SPJ1

Electrons distribution in shells:

First shell - 2 electrons

Second shell - 8 electrons

Third shell - 18 electrons

Fourth (valence shell) - 3 electrons

Explanation:

The group number of an element can be found by finding its number of valence shell electrons.

According to the electrons distribution in shells, the valence shell has 3 electrons

Hence element M will be in the third group of the periodic table

Hope this helps

please mark brainliest :)

The volume of extract to dilute to 10.00 ml, given that the actual amount of cereal weighed for the above experiment was 2.5671 g of cereal and using the extraction procedure from the lab manual, to determine the appropriate dilution of the extract to yield 10.00 ml of a solution at 25.0 ppb is: 19.16 ml.

A laboratory manual is a book containing instructions and exercises that aid in the completion of laboratory experiments. It is a guide that assists students and researchers in performing experiments, in particular, science experiments.

Let's break down the problem statement:

The actual amount of cereal weighed for the above experiment was 2.5671 g of cereal.Using the extraction procedure from the lab manual, determine the appropriate dilution of the extract to yield 10.00 ml of a solution at 25.0 ppb.To determine the volume of extract to dilute to 10.00 ml:

First, let's calculate the concentration of the extract in ppb units; we are given the following concentration of 25.0 ppb.C = 25 ppbNow, the formula for ppb units is shown below;

Ppb = (mg/L) / (1,000 L/g)

We have: 25 ppb = (mg/L) / (1,000 L/g)mg/L = 25 x 1,000 x 1 g = 25 μg/L.

Using the volume formula for concentration, shown below;

C1V1 = C2V2

Where:

Now, let's substitute the values into the formula: C1V1 = C2V2.

We have;

V1 = C2V2 / C1= (25 x 10.00) / 25= 10.00 ml

So, we dilute the extract with 10.00 ml of solvent to prepare a 25.0 ppb solution of cereal.To determine the volume of extract needed, we subtract the volume of solvent used from the volume we want, which is 10.00 ml.

Therefore;

The volume of extract to dilute to 10.00 ml is 10.00 ml - 0.84 ml = 9.16 ml.

Learn more about laboratory manual: https://brainly.com/question/30362922

#SPJ11

Conduction is the mechanism through which heat is transferred between materials that are in close proximity to one another. Typically, it happens in solids. While frying veggies in a skillet, as an illustration of conduct.

When neighbouring atoms or molecules meet, heat energy is delivered by conduction. Conduction occurs more readily in solids and liquids than in gases because of the closer spacing of the particles in these two states.

The process by which heat is transmitted from an object's hotter end to its cooler end is known as conduction. The term "thermal conductivity" refers to an object's capacity to transfer heat, and it is represented by the letter k.

To know more about Conduction visit:-

https://brainly.com/question/19025358

#SPJ1

Answer:

(1) 80.64 Liters
(2) [tex]6.29 \times 10^{-4} Liters[/tex]
(3) 2.61 grams
(4) 0.714 g/L
(5) 0.19624 kilograms

Explanation:

It's known that:
one mole of any gas at STP (1 atm, 273K ) = 22.4 Liter
number of moles of any gas at STP = [tex]\frac{V}{22.4} = \frac{Particles}{N_A}[/tex]   , Where V is Volume, NA is Avogadro's number, Particles: number of Particles
Volume of gas at STP = Moles × 22.4L

density = [tex]\frac{Molar-Mass}{Volume}[/tex]

(1)
Given That:

3.6 moles of CO2

Then:

Volume = 3.6 × 22.4 = 80.64 Liters

(2)

Moles of O2= [tex]\frac{1.69 \times 10^{19}}{6.022 \times 10^{23}} = 2.81 \times 10^{-5} moles[/tex]

Volume of O2= 22.4 × 2.81 × 10^-5 = [tex]6.29 \times 10^{-4} Liters[/tex]

(3)

Number of moles of He = [tex]\frac{14.6}{22.4} = 0.65 moles[/tex]

mass of He (molar mass = 4 g/mol) = 0.65 × 4 = 2.61 grams

(4)

The molar mass of CH4 = 12 + 4 = 16 g/mol

assuming that we have, at STP, one mole of Methane "CH4"

So, the volume = 22.4 L

Hence, The density = [tex]\frac{16}{22.4} = 0.714 g/L[/tex]

(5)

Number of moles of [tex]C_3H_8[/tex] = [tex]\frac{100}{22.4} = 4.46 moles[/tex]

molar mass of [tex]C_3H_8[/tex] = 3(12) + 8 = 44 g/mol

mass of [tex]C_3H_8[/tex] = 44 × 4.46 = 196.24 grams = 0.19624 kilograms




hope you find this easy to understand....

Have any questions? Write in the comments.

give me brainliest if you found this answer useful

1.958 x 10²⁵ formula units of Cr₃ (PO₄) ² are present in 32.45 mol of Cr₃(PO₄) ².

A mole is a unit used to quantify a substance's quantity. One mole of a substance is the volume of that substance that contains exactly 12 grams of carbon-12's weight in atoms (or other elementary particles like ions, molecules, or atoms).

We need to use Avogadro's number, which is roughly 6.02 x 10²³ particles per mole, to convert from moles to formula units.

We must first figure out how many units of the formula there are in a mole of Cr₃ (PO₄) ². One Cr³⁺ ion and two PO₄³⁻ ions make up the formula unit for Cr₃ (PO₄) ². As a result, we can get the total number of ions in one unit of the formula as:

1 Cr³+ ion + 2 PO₄⁻³ ions = 3 ions.

Consequently, make up one mole of Cr₃ (PO₄) ²:  6.02 x 10²³ particles /mole = 3 ions / formula unit= 1.806 x 10²⁴ ions/mole.

Using the conversion factor below, we can determine how many formula units are contained in 32.45 moles of Cr₃ (PO₄) ²:

5.875 × 10²⁵ ions = 32.45 moles x 1.806 x 10²⁴ ions/mole.

Because Cr₃ (PO₄) ² has a formula unit of 3 ions, we can calculate the number of formula units by dividing the total number of ions by 3.

5.875 x 10²⁵ ions/3 ions/formula unit = 1.958 x 10²⁵ formula units.

Consequently, 1.958 x 10²⁵ formula units of Cr₃ (PO₄) ² are present in 32.45 mol of Cr₃(PO₄) ².

To know more about mole, visit:

brainly.com/question/29724957

#SPJ1

To prepare the spectrophotometer of 2.33 ml of the stock solution to make it the 10.0 ml solution. if it has concentration of the 0.0406, the concentration is 0.0094 M.

The concentration of the solution, C₁= 0.0406 M

The concentration of the solution, C₂= ?

The volume of the solution, V₁ = 2.5 mL

The volume of the solution , V₂= 10.0 mL

The expression is as :

C₁V₁ = C₂V₂

C₂ = C₁V₁ / V₂

Where,

The C₁ = 0.0406 M

The V₁ = 2.33 mL

The C₂ = ?

The V₂ = 10 mL

C₂ = ( 0.0406 × 2.33 ) / 10

C₂ = 0.0094 M

The final concentration is 0.0094 M.

To learn more about concentration here

https://brainly.com/question/15588221

#SPJ4

Two properties of metal is High Electrical Conductivity and Ductility.

What is Electric Current?

High Electrical Conductivity: Metals have a high electrical conductivity, which means that they allow electricity to flow through them with ease. This makes them ideal for use in electric wires, where the current needs to flow smoothly and without interruption.

Ductility: Metals are ductile, which means they can be drawn into thin wires without breaking. This property is important for electric wires, as they need to be thin and flexible enough to be easily installed in homes and buildings.

Electric current refers to the flow of electric charge through a material. It is the rate at which electric charge flows through a conductor, measured in amperes (A). Electric current is typically carried by electrons in metals and ions in electrolytes. When a voltage difference is applied across a conductor, such as a wire, it creates an electric field that drives the movement of electric charges.

Learn more about Electric Current from the given link

https://brainly.com/question/1220936

#SPJ1

A chemist wants to prepare a stock solution of H₂SO₄ so that samples of 20.00mL  the chemist should use 45.0 L of concentrated acid to prepare 5.00 L of the stock solution.

a. To calculate the molarity of the stock solution, we can use the formula:

M₁V₁ = M₂V₂

where M1 is the molarity of the stock solution, V₁ is the volume of the stock solution used to make the final solution, M₂ is the desired final concentration, and V₂ is the final volume of the solution.

In this case, we have:

M₁(20.00 mL) = 0.50 M (100.0 mL + 20.00 mL)

Simplifying and solving for M1, we get:

M₁= 2.00 M

Therefore, the molarity of the stock solution should be 2.00 M.

b. To calculate the volume of concentrated acid needed to prepare 5.00 L of the stock solution, we can use the formula:

V₁= (M₂ x V₂) / M₁

where V1 is the volume of concentrated acid needed, M₂ is the desired molarity of the final solution, V₂ is the final volume of the solution, and M1 is the molarity of the concentrated acid.

In this case, we have:

V1 = (18.0 M x 5.00 L) / 2.00 M

Simplifying, we get:

V1 = 45.0 L

Learn more about solution here:

https://brainly.com/question/30665317

#SJP1

Answer:

The balanced chemical equation for the reaction of aluminum and oxygen to form aluminum oxide is:

4 Al + 3 O2 → 2 Al2O3

According to the stoichiometry of this reaction, 4 moles of aluminum reacts with 3 moles of oxygen to produce 2 moles of aluminum oxide.

Therefore, if 10 moles of aluminum react with enough oxygen, the limiting reactant will be aluminum, and all 10 moles of aluminum will react with 7.5 moles of oxygen to produce:

(10 mol Al) x (2 mol Al2O3 / 4 mol Al) = 5 moles of Al2O3

Therefore, 5 moles of aluminum oxide will be produced.

(Please could you kindly mark my answer as brainliest you could also follow me so that you could easily reach out to me for any other questions)