100 POINTS! Please help! (silly answers will be reported)

How many grams of NO2 can be produced from 15.0 g of NO and 5.60 g of O2 according to the equation:

2 NO + O2
2NO2

The statement "Solubility is how much solute will dissolve in solvent" is true.

Solubility refers to the maximum amount of a substance (solute) that can dissolve in a given amount of solvent at a specific temperature and pressure. The solubility of a substance can be influenced by several factors such as temperature, pressure, and the chemical nature of the solute and solvent.

When the maximum amount of solute has been dissolved in the solvent, the solution is said to be saturated. If more solute is added to a saturated solution, it will not dissolve and will instead precipitate out of the solution.

To know more about precipitate, visit :

https://brainly.com/question/18109776

#SPJ1

When there is an overpressure condition, operators may be required to take various steps, such as the following:

The following are some of the qualifications that are required for an operator:

Operators may also be required to follow established procedures for dealing with overpressure conditions in order to maintain safety and prevent equipment damage.

Learn more about Operators: https://brainly.com/question/20628271

#SPJ11

The reaction of 2-chloro-2-methylpropane with silver nitrate in ethanol proceeds at a faster rate than the reaction of 2-chlorobutane with silver nitrate in ethanol because 2-chloro-2-methylpropane forms a more stable carbocation than 2-chlorobutane. The correct answer is option b) 2-chloro-2-methylpropane forms a more stable carbocation than 2-chlorobutane.

This is because 2-chloro-2-methylpropane forms a tertiary carbocation, which is more stable due to the inductive effect and hyper conjugation. On the other hand, 2-chlorobutane forms a secondary carbocation, which is less stable. The higher stability of the carbocation in the case of 2-chloro-2-methylpropane leads to a faster reaction rate with silver nitrate in ethanol.

You can learn more about silver nitrate at: brainly.com/question/8071605

#SPJ11

The overall reaction is: NO₂(g) + Cl₂(g) → 2ClNO₂(g), The intermediates in the mechanism are ClNO₂(g) and Cl(g), and  the predicted rate law for the overall reaction is  k[NO₂]²[Cl₂].

The overall reaction will be: NO₂(g) + Cl₂(g) → 2ClNO₂(g)

The intermediates in the mechanism are ClNO₂(g) and Cl(g).

To determine the predicted rate law, we need to write the rate expressions for each step of the mechanism:

Step 1: Rate1 = k₁[NO₂][Cl₂]

Step 2: Rate2 = k₂[NO₂][Cl]

Since the second step is fast and involves an intermediate, we can assume that the concentration of the intermediate ClNO₂ is in steady-state, which means that its rate of formation will be equal to its rate of consumption. Therefore:

Rate1 = Rate2

k1[NO₂][Cl₂] = k₂[NO₂][ClNO₂]

Solving for [ClNO₂], we get:

[ClNO₂] = (k₁/k₂)[Cl₂]

Substituting this expression into the rate expression for the first step, we get:

Rate1 = k₁[NO₂][(k₁/k₂)[Cl₂]] = (k₁²/k₂)[NO₂][Cl₂]

Therefore, predicted rate law for the overall reaction will be:

Rate = k[NO₂]²[Cl₂]

where k = k₁²/k₂.

To know more about predicted rate law here

https://brainly.com/question/30719759

#SPJ4

--The given question is incomplete, the complete question is

"Consider this two-step mechanism for a reaction: NO₂(g) + Cl₂(g) ? ClNO₂(g) + Cl(g) Slow NO₂(g) + Cl(g) ? ClNO₂(g) Fast a. What is the overall reaction? b. Identify the intermediates in the mechanism. c. What is the predicted rate law?"--

The answer is 14.3 grams of H2O can be made.

Looking at the balanced chemical equation:

S + 6 HNO3 → H2SO4 + 6 NO2 + 2 H2O

We can see that 6 moles of HNO3 will produce 2 moles of H2O.

To calculate the number of moles of HmNO3 in 150.2 grams, we need to divide the mass by the molar mass:

150.2 g HNO3 x (1 mol HNO3 / 63.01 g HNO3) = 2.38 mol HNO3

Now we can use the mole ratio to find the number of moles of H2O produced:

2.38 mol HNO3 x (2 mol H2O / 6 mol HNO3) = 0.793 mol H2O

Finally, we can convert the number of moles of H2O to grams by multiplying by the molar mass:

0.793 mol H2O x 18.02 g/mol = 14.3 g H2O

Rounding to the nearest tenth, the answer is 14.3 grams of H2O can be made.

learn more about mass here

https://brainly.com/question/24191825

#SPJ1

To identify the limiting reactant in this reaction, we need to compare the amount of product that can be produced from each reactant. The balanced chemical equation for the reaction is:

Mg(OH)₂+ 2HCl → MgCl₂ + 2H₂O

The molar mass of Mg(OH)₂ is 58.32 g/mol, and the molar mass of HCl is 36.46 g/mol. We can use these values to calculate the number of moles of each reactant:

5.87 g Mg(OH)₂ / 58.32 g/mol = 0.1005 mol Mg(OH)₂

12.84 g HCl / 36.46 g/mol = 0.352 mol HCl

According to the stoichiometry of the balanced equation, 1 mole of Mg(OH)₂ reacts with 2 moles of HCl to form 1 mole of MgCl₂. Therefore, the amount of MgCl₂ that can be produced from each reactant is:

From Mg(OH)2: 0.1005 mol Mg(OH)₂ × 1 mol MgCl₂ / 1 mol Mg(OH)₂ = 0.1005 mol MgCl₂

From HCl: 0.352 mol HCl × 1 mol MgCl₂ / 2 mol HCl = 0.176 mol MgCl₂

Since Mg(OH)₂ produces less MgCl₂ compared to HCl, it is the limiting reactant, and HCl is in excess. Therefore, Mg(OH)₂ is the limiting reactant in this reaction.

To learn more about MgCl₂ refer to:

brainly.com/question/28145230

#SPJ4

The percent composition of Silicon dioxide ([tex]SiO_{2}[/tex]) is 46.7% silicon and 53.3% oxygen.

Silicon dioxide is а chemicаl compound thаt is composed of silicon аnd oxygen аtoms. It is аlso known аs silicа аnd is а commonly occurring minerаl.

In order to find the percent composition of silicon dioxide, we need to find out the percentаge of eаch element in the compound. First, we must find the molаr mаss of [tex]SiO_{2}[/tex].

Molаr mаss of [tex]SiO_{2}[/tex] = (аtomic mаss of Si x number of Si аtoms) + (аtomic mаss of O x number of O аtoms)

= (28.0855 g/mol x 1) + (15.9994 g/mol x 2)

= 60.0855 g/mol

Then, we must find the mаss of silicon in one mole of [tex]SiO_{2}[/tex].

Mаss of silicon in one mole of [tex]SiO_{2}[/tex] = (аtomic mаss of Si x number of Si аtoms) / molаr mаss of [tex]SiO_{2}[/tex]

= (28.0855 g/mol x 1) / 60.0855 g/mol

= 0.467 moles

Find the mаss of oxygen in one mole of [tex]SiO_{2}[/tex].

Mаss of oxygen in one mole of [tex]SiO_{2}[/tex] = (аtomic mаss of O x number of O аtoms) / molаr mаss of [tex]SiO_{2}[/tex]

= (15.9994 g/mol x 2) / 60.0855 g/mol

= 0.533 moles

Find the percentаge of silicon in [tex]SiO_{2}[/tex].

Percent composition of silicon in [tex]SiO_{2}[/tex] = (mаss of silicon in one mole of [tex]SiO_{2}[/tex] / molаr mаss of [tex]SiO_{2}[/tex]) x 100

= (0.467 moles / 1 mole) x 100

= 46.7%

Find the percentаge of oxygen in [tex]SiO_{2}[/tex].

Percent composition of oxygen in [tex]SiO_{2}[/tex] = (mаss of oxygen in one mole of [tex]SiO_{2}[/tex] / molаr mаss of [tex]SiO_{2}[/tex]) x 100

= (0.533 moles / 1 mole) x 100

= 53.3%

Therefore, the percent composition of Silicon dioxide ([tex]SiO_{2}[/tex]) is 46.7% silicon аnd 53.3% oxygen.

For more information about Silicon dioxide refers to the link: https://brainly.com/question/15412188

#SPJ11

Phenol is a weak acid because there is a lot of charge around the oxygen which tends to attract the hydrogen ion back again.

Generally a weak acid is defined as an acid that partially dissociate into it's ions in an aqueous solution. Basically phenol can donate a proton and behave as an acid. The phenoxide ion is formed by the donation of proton, and is stabilized due to delocalization of electrons.

Generally, oxygen is regarded as the most electronegative element in the ion and the delocalized electrons is usually drawn towards oxygen. Due to this attraction there will still be a lot of charge present around the oxygen which tends to attract the hydrogen ion back again and this is the reason why phenol is only a very weak acid.

Learn more about weak acid from the link given below.

https://brainly.com/question/22104949

#SPJ4

In nature, the structure of an object is often related to its function or properties because the shape of an object can affect how it interacts with other objects or substances.

This is true for molecules as well, where the arrangement of atoms and bonds can impact the molecule's chemical and physical properties.

For example, the shape of proteins is crucial to their function in biological systems. The three-dimensional structure of a protein determines its ability to interact with other molecules in the body, such as enzymes, hormones, or receptors. Even small changes in the protein's shape can have significant effects on its function, leading to diseases or disorders.

In summary, the shape of an object can have a significant impact on its function or properties, and this is true for molecules as well. Understanding the relationship between molecular shape and function is essential for many fields, including biochemistry, pharmacology, and materials science.

To know more about pharmacology, visit:

https://brainly.com/question/30308277

#SPJ1

Answer:

2 hydrogen atoms

Explanation:

because the hydrogen atoms are two

The kinetic molecular theory is a set of assumptions that are used to explain the behavior of gases. The correct option is "gas particles themselves have negligible volume."

Kinetic molecular theory is a theory of gases that explains their macroscopic properties based on the behavior and motion of their individual molecules.

The theory includes several postulates, or assumptions, that are considered to be true in order to explain the observed behavior of gases.

One of these postulates is that the gas particles themselves have negligible volume. This means that the actual size of the individual molecules is so small compared to the volume of the container they are in that their size can be ignored when considering the overall behavior of the gas.

Other postulates of kinetic molecular theory include that gas particles are in constant random motion, that they do not interact with each other except during collisions, and that collisions between particles are perfectly elastic and conserve both energy and momentum.

The theory also postulates that the average kinetic energy of the gas particles is directly proportional to the absolute temperature of the gas.

Therefore, gas particles themselves have negligible volume is a postulate of kinetic molecular theory .

To know more about Molecular theory refer here :

https://brainly.com/question/1520986

#SPJ11

Yes, it is necessary to know the exact volume of water used to dissolve the KHP.

Why is it necessary to know the exact volume of water used to dissolve the KHP?

It is necessary to know the exact volume of water used to dissolve KHP because the volume of water used affects the concentration of the solution, which in turn affects the accuracy of the results obtained. To accurately determine the concentration of a solution, it is important to know the amount of solute (in this case khp) dissolved in a given volume of solvent (water).Therefore, if the volume of water used to dissolve the khp is not known, the concentration of the resulting solution will be unknown as well. This can lead to inaccurate results and make it difficult to compare data with other experiments or measurements. It is important to use precise measurements and follow experimental procedures accurately to ensure reliable results.

To learn more about the KHP, visit here:

https://brainly.com/question/29576872

#SPJ11

There are 118 elements on the periodic table.

The Bohr radius serves as the most likely separation between the electron and proton in the hydrogen atom's 2pz orbital which is 0.529 Å.

For the 2pz orbital of the hydrogen atom, the most probable distance between the electron and the proton can be determined using the radial probability distribution function.

The radial probability distribution function gives the probability of finding the electron at a certain distance from the nucleus. For the 2pz orbital, the function has a maximum at a distance of a0, which is the Bohr radius. The Bohr radius is equal to 0.529 Å, or approximately 5.29 x 10⁻¹¹ meters.

Therefore, the most probable distance between the electron and the proton in the 2pz orbital of the hydrogen atom is the Bohr radius, which is the distance at which the electron has the highest probability of being found.

To learn more about electron refer to:

brainly.com/question/28977387

#SPJ4

The correct structure of the cyclic hemiacetal that forms under acidic conditions when 5-hydroxy-4-methylpentanal cyclizes is attached below.

In this structure, the aldehyde group (CHO) and the hydroxyl group (OH) on the same molecule have reacted to form a cyclic hemiacetal. The carbon atom in the aldehyde group has formed a bond with the oxygen atom in the hydroxyl group, resulting in a five-membered ring structure.

The hemiacetal group (-CH(OH)-) is attached to the second carbon atom in the chain, which is also methyl-substituted (H3C-) and located next to the oxygen atom in the ring.

Learn more on acidic conditions here: https://brainly.com/question/13592513

#SPJ1

Answer:

No , No for both

niether of these reaction will take place as in First one Ag is less reactive then Na so It cannot displace it .. Same for Second reaction Mn Cannot displace Ca

The reactions that occur when this mixture is heated are [tex]MgSO_4 + 7H_2O[/tex] (heat) and  [tex]CoCl_2 + 6H_2O[/tex](heat).

It is given that the material used in some cracker tins that include a glass vial of drying material in the lid to keep the crackers crisp is a mixture magnesium sulfate and cobalt chloride indicators.

The indicator changes color from blue to pink when magnesium sulfate absorbs moisture. The reaction is as follows:

[tex]MgSO_4 . H_2O + 6H_2O--- > MgSO_4 . 7H_2O[/tex]

Similarly cobalt chloride absorbs moisture as:

[tex]CoCl_2 . 4H_2O + 2H_2O --- > CoCl_2 . 6H_2O[/tex]

When these substances are heated the following reaction takes place:

This reaction is an endothermic reaction that involves the removal of water molecules from magnesium sulfate, producing anhydrous magnesium sulfate and water vapor.

[tex]MgSO_4 . 7H_2O -- > MgSO_4 + 7H_2O (heat)[/tex]

It involves the removal of water molecules from cobalt chloride, producing anhydrous cobalt chloride and water vapor.

[tex]CoCl_2 . 4H_2O + 2H_2O -- > CoCl_2 + 6H_2O (heat)[/tex]

To learn more about magnesium sulfate click here https://brainly.com/question/12842749

#SPJ1

Answer:

[Kr] 4d^10 5s

Explanation:

Krypton is the nearest noble gas build structure off of that

The aluminum ground state electron configuration is 1s²2s²2p⁶3s²3p¹.

The electron configuration of aluminum will therefore be  1s²2s²2p⁶3s²3p¹. Scientists can easily write and communicate how electrons are arranged around an atom's nucleus using the configuration notation. It is now simpler to comprehend and predict how atoms will interact to form chemical bonds as a result.

The Aufbau Principle, Pauli-exclusion Principle, and Hund's Rule are the three key rules that we adhere to. By removing electrons from the outermost p orbital first, then the s orbital, and finally the d orbitals, the electronic configuration of cations is determined (if any more electrons need to be removed).

To know more about electron configuration visit:

brainly.com/question/29757010

#SPJ6

For a yield of SO₃ of 61.0%, the overall pressure at equilibrium must be 332 atm.

The given equilibrium reaction is 2SO₂(g) + O₂(g) ⇌ 2SO₃(g) with equilibrium constant KP = 0.13 at 803°C.

Initially, 2.00 mol SO₂ and 2.00 mol O₂ are present in a flask. Let 'x' be the number of moles of SO₃ formed at equilibrium. Therefore, the number of moles of SO₂ and O₂consumed in the reaction is also 'x'.

According to the balanced equation, 2 moles of SO₂react with 1 mole of O₂ to form 2 moles of  SO₃. Thus, the number of moles of SO₃ formed is '2x'.

Using the equilibrium constant expression, we get:

KP = [SO₃]2 / [SO₂]2 [O₂]

Substituting the equilibrium concentrations in terms of 'x', we get:

0.13 = (2x / (2.00 - x))2 (2.00 - x - x)

Simplifying and solving for 'x', we get:

x = 0.958 mol

The number of moles of SO₃ formed at equilibrium is 2x = 1.92 mol.

To find the total pressure at equilibrium, we can use the ideal gas law:

PV = nRT

where P is the total pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.

Assuming the volume and temperature remain constant, we can write:

P = ntotal RT / V

where ntotal is the total number of moles of gas present at equilibrium.

Initially, we have 2.00 mol SO₂ and 2.00 mol O₂, so the total number of moles of gas present initially is:

ntotal = 2.00 + 2.00 = 4.00 mol

At equilibrium, we have 0.958 mol SO₂, 0.958 mol O₂, and 1.92 mol SO₃. Therefore, the total number of moles of gas present at equilibrium is:

ntotal = 0.958 + 0.958 + 1.92 = 3.84 mol

Substituting the values in the equation for P, we get:

P = (3.84 mol) (0.0821 L atm mol-1 K-1) (1076 K) / (1.00 L) = 332 atm

Therefore, the total pressure at equilibrium must be 332 atm to have a 61.0% yield of SO₃.

To learn more about moles refer to:

brainly.com/question/26416088

#SPJ4

The edge length of a body-centered cubic (BCC) unit cell for the given alloy is 1.93 Å.

The edge length of a body-centered cubic (BCC) unit cell can be calculated using the following formula:

Edge length = (4/√3)a

Where a is the length of the edge of the unit cell. Here, Fe is the solvent, and V is the solute. The formula for a solid-solution alloy's density can be expressed as follows:

ρ = [M1ρ1 + M2ρ2]/[M1 + M2]

where M1 and M2 are the molecular weights of the solvent and solute atoms, respectively, and ρ1 and ρ2 are their densities. The molecular weight of the solvent Fe and the solute V are 55.85 and 50.94 g/mol, respectively. At room temperature, the densities of Fe and V are 7.86 g/cm³ and 6.0 g/cm³, respectively. We'll use the following equation to determine the density of the alloy:

ρ = [85(7.86) + 15(6.0)]/[85 + 15]

ρ = (668.1/100)

ρ = 6.68 g/cm³

Substituting these values in the formula for edge length of BCC unit cell, we get,

Edge length = (4/√3) × a6.68 = (4/√3) × a

We will then solve for a as follows:

a = (6.68 × √3)/4a = 1.93Å

Therefore, the edge length for the given alloy is 1.93 Å.

To learn more about "edge length", visit: https://brainly.com/question/16176175

#SPJ11

Rhombic sulfur and monoclinic sulfur are the two primary allotropes of sulfur.

Allotropes are various versions of the same element that can exist in various crystal shapes or physical states. An element's several allotropes each have different physical and chemical characteristics. For instance, carbon can exist in a variety of allotropes, each with a unique set of properties and applications, such as diamond, graphite, and fullerene.

The most prevalent type of sulfur is rhombic sulfur, which is yellow in hue. It is made up of S8 rings that have been puckered into a chair-like conformation. Rhombic sulfur is insoluble in water and stable at temperatures lower than 96°C. Insecticides, fertilizers, and sulfuric acid are all made with it.

Compared to rhombic sulfur, monoclinic sulfur is less frequent and denser. Although it has golden crystals as well, they resemble needles. Monoclinic sulfur can dissolve in some solvents, such as carbon disulfide, and is stable above 96°C. Both the vulcanization of rubber and the creation of gunpowder use it.

The 58 molecules that make up both types of sulfur are the same, but their crystal shapes and physical characteristics are different. Other allotropes of sulfur, like amorphous sulfur and plastic sulfur, which have different structures and characteristics from rhombic and monoclinic sulfur, can also occur.

To know more about allotropes, visit:

brainly.com/question/13058829

#SPJ1

The correct answers are

a) The balanced chemical equation is KOH(aq) + NiSO₄(aq) → Ni(OH)₂(s) + K₂SO₄(aq)

b) Ni(OH)₂.

c) KOH is the limiting reactant

d)1.854 g Ni(OH)₂

e) Concentration of K⁺ and SO₄²⁻ ions in solution is: 0.05333M

(a) The balanced chemical equation for the reaction that occurs can be written as:

KOH(aq) + NiSO₄(aq) → Ni(OH)₂(s) + K₂SO₄(aq)

(b) The precipitate that forms is Ni(OH)₂.

(c) To determine the limiting reactant, we need to calculate the number of moles of KOH and NiSO₄.

Number of moles of KOH = 0.200 mol/L × 0.100 L = 0.0200 mol

Number of moles of NiSO₄ = 0.150 mol/L × 0.200 L = 0.0300 mol

Since KOH and NiSO₄ react in a 1:1 molar ratio, KOH is the limiting reactant because it produces fewer moles of product than NiSO₄.

(d) To calculate the mass of Ni(OH)₂ precipitate formed, we first need to determine the number of moles of Ni(OH)₂ formed:

0.0200 mol KOH × (1 mol Ni(OH)2 / 1 mol KOH) = 0.0200 mol Ni(OH)₂

Therefore, the mass of Ni(OH)₂ formed can be calculated as:

0.0200 mol Ni(OH)2 × 92.71 g/mol = 1.854 g Ni(OH)₂

(e) The balanced chemical equation shows that K₂SO₄ and Ni(OH)₂ are the products of the reaction. To determine the concentration of each ion that remains in solution, we need to calculate the number of moles of each product formed.

Number of moles of K₂SO₄ = 0.0200 mol KOH × (1 mol K₂SO₄ / 1 mol KOH) = 0.0200 mol

Number of moles of Ni(OH)₂ = 0.0200 mol KOH × (1 mol Ni(OH)₂ / 1 mol KOH) = 0.0200 mol

Therefore, the concentration of K⁺ and SO₄²⁻ ions in solution is:

[K⁺] = 0.0200 mol / (0.100 L + 0.200 L) = 0.0533 M

[SO₄²⁻ ] = 0.0200 mol / (0.100 L + 0.200 L) = 0.0533 M

The concentration of Ni²⁺ ions in solution can be calculated by subtracting the number of moles of Ni(OH)₂ from the initial number of moles of NiSO₄:

Number of moles of Ni²⁺ = 0.0300 mol - 0.0200 mol = 0.0100 mol

[Ni2+] = 0.0100 mol / (0.100 L + 0.200 L) = 0.0267 M.

To learn more about  balanced chemical equation refer to:

brainly.com/question/28294176

#SPJ4

Answer:

c number is the answer of this question

If H₂O is removed from the given reaction, the reactants will react to produce more H₂O. Therefore, the correct option is option C.

Le Chatelier's Principle states that when a chemical system is under stress and in equilibrium, the equilibrium should change to lessen the stress. In response to an alteration in temperature, intensity, volume, or pressure, it can be used to forecast the course of a chemical reaction.

The equilibrium law or Chatelier's principle are other names for Le Chatelier's principle. The theory foretells how changes will affect a system. Although it is most frequently used in chemistry, it is equally relevant in economics as well as biology (homeostasis). If H₂O is removed from the given reaction, the reactants will react to produce more H₂O.

Therefore, the correct option is option C.

To know more about Le Chatelier′s Principle, here:

https://brainly.com/question/2001993

#SPJ5

It is true that the allowable range for an objective function coefficient considers the original estimates for all the other coefficients when estimating the range for this particular coefficient.

Generally the range is determined by the degree of uncertainty in the data used to estimate the coefficients, as well as the level of risk that the decision-maker is willing to accept. Therefore, sometimes the range for an objective function coefficient does not necessarily depend on the accuracy of the other coefficients. For example, if the objective function is to maximize profit, then the allowable range for any coefficient would be the range of values that would result in the highest possible profit, regardless of other coefficient estimates.

To learn more about uncertainty click here https://brainly.com/question/30325893

#SPJ1

The equilibrium pH of the solution will be approximately 9.72 when excess Mg(OH)₂ is added to pure water.

When excess Mg(OH)₂ is added to pure water, it will dissociate slightly to form Mg²⁺ and OH⁻ ions according to the following equation:

Mg(OH)₂ ⇌ Mg²⁺ + 2OH⁻

The Ksp for Mg(OH)₂ is given as 7.1 x 10⁻¹², which is the equilibrium constant for the dissociation of Mg(OH)₂ into Mg²⁺ and OH⁻ ions. The expression for Ksp is:

Ksp = [Mg²⁺][OH⁻]²

Since Mg(OH)₂ dissociates into one Mg²⁺ ion and two OH⁻ ions, we can rewrite the equation as:

Ksp = [Mg²⁺][OH⁻]² = 7.1 x 10⁻¹²

Since we are adding excess Mg(OH)₂ to pure water, the initial concentration of Mg²⁺ and OH⁻ ions can be considered negligible. Let x be the concentration of OH⁻ ions that will be produced upon dissociation of Mg(OH)₂. Then, the equilibrium concentration of Mg²⁺ ions will be equal to x, and the equilibrium concentration of OH⁻ ions will be equal to 2x.

Substituting these values into Ksp expression, we have:

Ksp = [Mg²⁺][OH⁻]² = (x)(2x)² = 4x³ = 7.1 x 10⁻¹²

Solving for x, we get:

x = 5.3 x 10⁻⁵ M

Therefore, the equilibrium concentration of OH⁻ ions in the solution will be 5.3 x 10⁻⁵ M. To calculate the pH of solution, we can use the relationship:

pH = 14 - pOH

pOH = -log[OH⁻] = -log(5.3 x 10⁻⁵) = 4.28

pH = 14 - 4.28

= 9.72

To know more about equilibrium here

https://brainly.com/question/30525486

#SPJ4

The system's final temperature is 295 °C, or 71.33 °F. To calculate the metal's heat capacity, use Q = smT. (Be remember to factor in the metal's mass, its mass in heat, and its change in temperature.

The following equation can be used to determine specific heat, abbreviated Cp: Cp=QmΔT When m is the material's mass, Q is the quantity of heat energy delivered to the substance, & T is the temperature change of the substance, we can write C p = Q m T.

Any type of calorimeter must be used in the laboratory to measure specific heat. A calorimeter is an insulated container with the ability to track changes in energy. To minimise energy gain or loss to or from the environment, the calorimeter is insulated.

To know more about mass visit:

https://brainly.com/question/15959704

#SPJ1

In a system that contains multiple gaseous species at equilibrium, if the pressure of the system is decreased then the equilibrium will shifts towards the direction in which no of moles of gaseous substance is more.

According to Le Chatelier's principle if the pressure on a gas in a reaction is increased, the position of the equilibrium is shifted towards the side with less no of moles of gas molecules. On the other hand, if pressure is decreased then the equilibrium will shift towards the side of the equation which has more number of moles of substances.

If the volume is decreased, the reaction will shift towards the side which contains less moles of gaseous particles, whereas if the volume is increased the reaction will shift towards the side of the reaction containing more number of moles of gaseous substances.

To know more about equilibrium here

https://brainly.com/question/30751314

#SPJ4

To prepare a buffer with a pH of 5.648, what quantity of solid potassium acetate should be added to 0.500 L of a 0.260 M acetic acid solution?The given is: Initial volume = 0.500 LI nitial concentration of acetic acid = 0.260 M Molarity of acid is given, and the pH is given, which is the pKa value of the acid.

The formula for calculating the ratio of the acid and salt is pH = pKa + log [salt] / [acid].The Henderson-Hasselbalch equation can be used to solve this problem in a single step.The Henderson-Hasselbalch equation is used to calculate the pH of a buffer solution. It is expressed as: pH = pKa + log [A-] / [HA]Where [HA] is the concentration of the weak acid, and [A-] is the concentration of the conjugate base. To calculate the required amount of potassium acetate: Step 1: Calculate the pKa of acetic acid. Acetic acid has a pKa of 4.76. pH = pKa + log [A-] / [HA].The given pH value is 5.648.Therefore, 5.648 = 4.76 + log [salt] / [acid].Find the ratio of the salt and the acid:[salt] / [acid] = antilog (pH - pKa).= antilog (5.648 - 4.76)= antilog (0.888)= 7.29 [salt] / [acid].The ratio of the salt to the acid is 7.29:1. We'll use this ratio to determine the quantity of potassium acetate that should be used to produce the buffer.

Step 2: Calculate the concentration of acetic acid in the buffer solution.The concentration of acetic acid in the buffer is:[acid] = 0.260 M.The volume of buffer solution is 0.500 L.So, the number of moles of acetic acid in the solution is:[acid] × volume = 0.260 × 0.500 = 0.130 moles of acid.Step 3: Determine the number of moles of potassium acetate necessary to produce the buffer.The moles of salt required = moles of acid / 7.29 = 0.130 / 7.29 = 0.0178 moles of salt (KAc).Step 4: Convert the number of moles of potassium acetate to grams. The molecular weight of potassium acetate is 98.14 g/mol.The mass of salt required is:mass = moles × molecular weight.= 0.0178 × 98.14= 1.747 grams of KAc.Therefore, 1.747 grams of potassium acetate should be added to 0.500 L of a 0.260 M acetic acid solution to prepare a buffer with a pH of 5.648.

Learn more about preparation of buffer: https://brainly.com/question/13176293

#SPJ11

The concentration of silver ion after the reaction of 300 mL of a .2 molar solution of AgNO3 with 100 mL of a .05 molar solution of CaCl2 has gone to completion is 0.15 molar.

The equation for the reaction is: 2AgNO3 + CaCl2 → 2AgCl + Ca(NO3)2.

The molar concentration of the AgNO3 solution is 0.2 molar. When 300 mL of this solution is added to 100 mL of a 0.05 molar solution of CaCl2, the moles of AgNO3 will be 0.6 and the moles of CaCl2 will be 0.05.

When the reaction goes to completion, 0.6 moles of AgNO3 will produce 0.6 moles of AgCl. Therefore, the concentration of silver ions will be 0.6/400 mL, or 0.15 molar.

Learn more about concentration: https://brainly.com/question/2201903

#SPJ11