The lex program scans the input text, counts the number of characters and new lines encountered, and outputs the final count of characters and new lines. The lex program is designed to count the number of characters and new lines in a given input text.
1. It analyzes the input character by character and keeps track of the count of characters and new lines encountered. The program outputs the final count of characters and new lines in the text.
2. The lex program first defines patterns to match individual characters and new lines. It then uses rules to specify the actions to be taken when a pattern is matched. For each character encountered, the program increments the character count. When a new line is detected, the program increments the new line count. At the end of the input text, the program outputs the total count of characters and new lines.
1. Define the patterns for individual characters and new lines in the lex program.
2. Specify rules to match the patterns and define the corresponding actions.
3. Initialize variables to keep track of the character count and new line count.
4. For each character encountered, increment the character count.
5. When a new line is detected, increment the new line count.
6. Continue scanning the input text until the end is reached.
7. Output the final count of characters and new lines.
8. Compile the lex program and run it with the input text to obtain the desired counts.
learn more about program here: brainly.com/question/14368396
#SPJ11
Write a program that prompts the user for five 32-bit integers, stores them in an array calculates only the sum of the ODD values of the array, displays the sum on the screen. Ir addition, this program prompts the user for a 32-bit integer and display if the array contains this value or not. We suppose that we deal only with unsigned integer. Your code must be composed with the following procedures. 1. Main procedure 2. Prompt user for multiple integers 3. Calculate the sum of the ODD values of the array 4. Display the sum 5. Prompt user for an integer, fetch it into the array and display on screen "Exist" or "No Exist"
This program prompts the user for five 32-bit integers, stores them in an array, calculates the sum of the odd values in the array, and checks if a user-provided integer exists in the array.
Here's the program that prompts the user for five 32-bit integers, stores them in an array, calculates the sum of the odd values in the array, and checks if a user-provided integer exists in the array:
```cpp
#include <iostream>
const int ARRAY_SIZE = 5;
void promptUser(int array[]) {
std::cout << "Enter " << ARRAY_SIZE << " integers: ";
for (int i = 0; i < ARRAY_SIZE; i++) {
std::cin >> array[i];
}
}
int calculateOddSum(const int array[]) {
int sum = 0;
for (int i = 0; i < ARRAY_SIZE; i++) {
if (array[i] % 2 != 0) {
sum += array[i];
}
}
return sum;
}
bool checkExistence(const int array[], int target) {
for (int i = 0; i < ARRAY_SIZE; i++) {
if (array[i] == target) {
return true;
}
}
return false;
}
int main() {
int array[ARRAY_SIZE];
promptUser(array);
int sum = calculateOddSum(array);
std::cout << "Sum of odd values: " << sum << std::endl;
int target;
std::cout << "Enter an integer to check: ";
std::cin >> target;
if (checkExistence(array, target)) {
std::cout << "Exist" << std::endl;
} else {
std::cout << "No Exist" << std::endl;
}
return 0;
}
```
1. The `promptUser` procedure asks the user to enter five integers and stores them in the `array` using a loop and `std::cin`.
2. The `calculateOddSum` procedure iterates over the `array` and checks if each element is odd. If so, it adds the odd value to the `sum` variable.
3. The `checkExistence` procedure searches for the `target` integer in the `array` and returns `true` if it exists, and `false` otherwise.
4. In the `main` procedure, the user is prompted to enter the integers, and the `promptUser` procedure is called to populate the `array`.
5. The `calculateOddSum` procedure is called, and the sum of the odd values is stored in the `sum` variable, which is then displayed on the screen.
6. The user is prompted to enter an integer to check its existence in the `array`. The `checkExistence` procedure is called, and based on the result, "Exist" or "No Exist" is displayed on the screen.
This program assumes that the user will enter valid 32-bit unsigned integers.
To learn more about array Click Here: brainly.com/question/13261246
#SPJ11
Which of the below cmd command will let the network admin locate which router is not reachable? a) ping. b) netstat. c) tracert. d) ipconfig. Which of the below should be considered while configuring a domain server? The server IP address must be configured statically The server IP address must be configured Dynamically The remote access must be enabled on the server The Administrator password must be always disabled
To locate a router that is not reachable, the appropriate command to use is "tracert" (c). This command helps identify the network path and determines where the connection is failing.
To locate a router that is not reachable, the "tracert" (c) command is the most suitable option. Tracert, short for "trace route," helps network administrators identify the path taken by network packets and determine the specific router or hop where the connection is failing. By analyzing the output of the tracert command, administrators can pinpoint the problematic router and take necessary troubleshooting steps.
When configuring a domain server, it is recommended to set the server IP address statically. This ensures that the server always uses the same IP address, which simplifies network management and avoids potential IP conflicts. Additionally, enabling remote access on the server allows authorized users to connect to the server remotely for management and administration purposes.
However, the statement suggesting that the Administrator password must be always disabled is incorrect. It is crucial to have a strong and secure password for the Administrator account on a domain server. This helps protect against unauthorized access and ensures the server's overall security. Disabling the Administrator password would leave the server vulnerable to unauthorized access and potential security breaches.
know more about IP address statically :brainly.com/question/30099584
#SPJ11
10.#include #define N 8 void fun(int a[ ], int m, { int i; for(i=m; i<=n; i++) a[i]++; } int main() { int i, a[N]={1, 2, 3, 4, 5, 6, 7, 8}; fun(a, 2, 6); for(i=0; i A. 1 2 3 4 5 6 7 8 B. 1 2 4 5 6 7 8 8 C. 2 3 4 5 6 7 8 9 D. 1 2 4 5 6 7 8 9
The code modifies the elements of the array `a` by incrementing a portion of the array from index 2 to index 6 by one, resulting in the output 2 3 4 5 6 7 8 9.
1. The output of the given code will be option C: 2 3 4 5 6 7 8 9. The code defines a function called `fun` that takes an array `a`, a starting index `m`, and an ending index `n` as parameters. Inside the `fun` function, it increments each element of the array from index `m` to index `n` inclusive by one.
2. In the `main` function, an array `a` of size 8 is declared and initialized with values 1 to 8. Then, the `fun` function is called with `a` as the array parameter, 2 as the starting index, and 6 as the ending index. This means that the elements of `a` from index 2 to index 6 will be incremented by one.
3. After the function call, a for loop is used to print the elements of `a`. Since the elements from index 2 to index 6 were incremented by one inside the `fun` function, the output will be 2 3 4 5 6 7 8 9.
learn more about array here: brainly.com/question/31605219
#SPJ11
clear clc
detectedp = 0;
detectedo = 0;
A =\[
0, 0, 0, 1, 0, 0, 0, 0, 1, 0;
0, 0, 0, 0, 1, 0, 0, 0, 0,1;
0, 0, 0, 1, 0, 0, 0, 0, 1, 0;
0, 0.1, 0, 0, 0, 0, 1, 0, 0
1, 1, 0, 0, 0, 1, 1, 0, 0, 0
0, 0, 0, 1, 0, 0, 0, 0, 1,0;
0, 0, 0, 0, 1, 0, 0, 0, 0, 1 ;
0, 0, 0, 1, 0, 0, 0, 0, 1, 0;
0, 0, 1, 0, 0, 0, 0, 1, 0, 0;
1, 1, 0, 0, 0, 1, 1, 0, 0,0 ];
for m = 1 : 9
for n = 1:9
if A(m,n)==1 && A(m,n+1)==1 && A(m+1,n)==0
detectedP = detectedP + 1;
end
if A(mn)==1 && A(m+1,n)==1 && A(m+1.n+1)==1
detectedQ = detectedQ + 1;
end
end
end
detectedP
detectedQ
What number is displayed from: detectedP =______
What number is displayed from: detectedQ=_____
The number that is displayed from detectedP is 9 and the number that is displayed from detectedQ is 3.The given code above is a MATLAB code that aims to identify the number of objects in a given grid.
The grid is composed of 10 by 10 matrix with only 0’s and 1’s. The variable A holds the grid configuration, with each row defining a single line of the matrix. The problem requires counting the number of objects in the grid. An object can be defined as a group of contiguous 1’s. The object can be a 2x2 or 1x2 rectangle. We can refer to a 2x2 rectangle as “Q” and a 1x2 rectangle as “P”. To solve the problem, the code used two nested for loops to visit each cell of the grid to check if it is part of a P or Q object. The count of detected objects is done by incrementing the detectedP or detectedQ variable each time a pattern is found.
To know more about code visit:
https://brainly.com/question/32809068
#SPJ11
Write a program in C++ that that will perform the following
functions in a linear link list.
1. Insert
an element before a target point.
2. Delete
an element before a target point.
An example implementation of a linear linked list in C++ that includes functions to insert and delete elements before a target point:
#include <iostream>
using namespace std;
// Define the node structure for the linked list
struct Node {
int data;
Node* next;
};
// Function to insert a new element before a target point
void insertBefore(Node** head_ref, int target, int new_data) {
// Create a new node with the new data
Node* new_node = new Node();
new_node->data = new_data;
// If the list is empty or the target is at the beginning of the list,
// set the new node as the new head of the list
if (*head_ref == NULL || (*head_ref)->data == target) {
new_node->next = *head_ref;
*head_ref = new_node;
return;
}
// Traverse the list until we find the target node
Node* curr_node = *head_ref;
while (curr_node->next != NULL && curr_node->next->data != target) {
curr_node = curr_node->next;
}
// If we didn't find the target node, the new node cannot be inserted
if (curr_node->next == NULL) {
cout << "Target not found. Element not inserted." << endl;
return;
}
// Insert the new node before the target node
new_node->next = curr_node->next;
curr_node->next = new_node;
}
// Function to delete an element before a target point
void deleteBefore(Node** head_ref, int target) {
// If the list is empty or the target is at the beginning of the list,
// there is no element to delete
if (*head_ref == NULL || (*head_ref)->data == target) {
cout << "No element to delete before target." << endl;
return;
}
// If the target is the second element in the list, delete the first element
if ((*head_ref)->next != NULL && (*head_ref)->next->data == target) {
Node* temp_node = *head_ref;
*head_ref = (*head_ref)->next;
delete temp_node;
return;
}
// Traverse the list until we find the node before the target node
Node* curr_node = *head_ref;
while (curr_node->next != NULL && curr_node->next->next != NULL && curr_node->next->next->data != target) {
curr_node = curr_node->next;
}
// If we didn't find the node before the target node, there is no element to delete
if (curr_node->next == NULL || curr_node->next->next == NULL) {
cout << "No element to delete before target." << endl;
return;
}
// Delete the node before the target node
Node* temp_node = curr_node->next;
curr_node->next = curr_node->next->next;
delete temp_node;
}
// Function to print all elements of the linked list
void printList(Node* head) {
Node* curr_node = head;
while (curr_node != NULL) {
cout << curr_node->data << " ";
curr_node = curr_node->next;
}
cout << endl;
}
int main() {
// Initialize an empty linked list
Node* head = NULL;
// Insert some elements into the list
insertBefore(&head, 3, 4);
insertBefore(&head, 3, 2);
insertBefore(&head, 3, 1);
insertBefore(&head, 4, 5);
// Print the list
cout << "List after insertions: ";
printList(head);
// Delete some elements from the list
deleteBefore(&head, 4);
deleteBefore(&head, 2);
// Print the list again
cout << "List after deletions: ";
printList(head);
return 0;
}
This program uses a Node struct to represent each element in the linked list. The insertBefore function takes a target value and a new value, and inserts the new value into the list before the first occurrence of the target value. If the target value is not found in the list, the function prints an error message and does not insert the new value.
The deleteBefore function also takes a target value, but deletes the element immediately before the first occurrence of the target value. If the target value is not found or there is no element before the target value, the function prints an error message and does
Learn more about linear linked list here:
https://brainly.com/question/13898701
#SPJ11
1. What phenomena are allowed on the isolation level READ committed:
a. uncommitted read
b. non repeatable read
c. phantoms
d. overwriting of uncommitted data
2. What phenomena are allowed on the isolation level Serializable:
a. uncommitted read
b. non repeatable read
c. phantoms
d. overwriting of uncommitted data
On the isolation level READ committed, the allowed phenomena are:a. Uncommitted read b. Non-repeatable read c. Phantoms d. Overwriting of uncommitted data. Option d is correct.
The READ committed isolation level allows phenomena such as uncommitted read, non-repeatable read, phantoms, and overwriting of uncommitted data. An uncommitted read refers to reading data that has been modified but not yet committed by another transaction. A non-repeatable read occurs when a transaction reads the same data multiple times and gets different values due to other transactions modifying the data. Phantoms refer to new rows being inserted or deleted by other transactions between reads within the same transaction. Overwriting of uncommitted data happens when a transaction modifies data that has been modified but not yet committed by another transaction.
The Serializable isolation level, being the highest level of isolation, provides strict transaction isolation. It prevents all the mentioned phenomena, including uncommitted read, non-repeatable read, phantoms, and overwriting of uncommitted data. Serializable isolation ensures that transactions are executed as if they were running sequentially, with no interference from other concurrent transactions. This level guarantees the highest data consistency but may result in lower concurrency compared to other isolation levels.
To learn more about Non-repeatable read click here : brainly.com/question/32170323
#SPJ11
Which of the following statements about parquet storage format is false?
a. Parquet storage format stores all values of the same column together.
b. Given a dataframe with 100 columns. It is faster to query a single column of the dataframe if the data is stored using the CSV storage format compared to parquet storage format.
c. Parquet storage format stores the schema with the data.
d. Given a dataframe with 100 columns. It is faster to query a single column of the dataframe if the data is stored using the parquet storage format compared to it being stored in a CSV storage format.
The statement that is false about the Parquet storage format is: b. Given a data frame with 100 columns. It is faster to query a single column of the data frame if the data is stored using the CSV storage format compared to the parquet storage format.
What is the Parquet storage format?
Parquet storage format is a columnar storage format, which is used to store data in an efficient way. Parquet storage format is capable of storing nested data structures, which is a collection of complex data types like arrays, maps, and structs. Parquet storage format is a good choice when dealing with large data sets because it provides good compression, making it easy to manage big data volumes. The parquet storage format is supported by many big data processing frameworks, like Apache Hadoop, Apache Spark, etc. Features of Parquet storage formatThe following are the features of the Parquet storage format:It is a columnar storage format, which allows better compression and encoding. It is designed to handle complex data structures, making it easy to store nested data types. It stores metadata about the data and its schema. This makes it easier to read data from the storage. It supports data partitioning, which is a way of dividing data into logical parts. This makes it easy to query data, based on specific criteria. Parquet storage format supports predicate pushdown, which is a technique that filters data at the storage level, making it faster to access data. This means that queries can be executed faster and with less processing overhead than traditional approaches.
What is CSV storage format?
CSV (Comma Separated Value) is a plain text format that is commonly used to store data. CSV format is simple, and it is easy to read and write. It is supported by many tools and programming languages. CSV format is not a good choice when dealing with large datasets because it does not support efficient compression and encoding. It is a row-based storage format, which means that each row is stored on a separate line. This makes it inefficient when querying data for specific columns. It is important to note that the CSV storage format does not store metadata about the data or its schema. This makes it difficult to read data from the storage, especially when dealing with complex data types like arrays, maps, and structs.
Learn more about CSV files:
brainly.com/question/30761893
#SPJ11
When we create an object from a class, we call this: a. object creation b. instantiation c. class setup d. initializer The data that an object contains and manipulates is more generally know as the _____ of the object.
a. user data b. supplied data c. attributes d. origin data
When we create an object from a class, we call this "instantiation". The data that an object contains and manipulates is more generally known as the "attributes" of the object.
In object-oriented programming, an object is an instance of a class. When we create an object, we are essentially creating a specific instance of a class with its own unique set of data and behavior. This process is called instantiation. It involves allocating memory for the object and initializing its attributes based on the defined structure and properties of the class.
Attributes are the variables or data members associated with an object. They define the state or characteristics of the object and can hold different types of data such as integers, strings, or even other objects. These attributes represent the data that the object manipulates and stores. They can be accessed and modified through methods or directly in some programming languages. The attributes of an object provide the necessary context and information for the object to perform its operations and fulfill its purpose. They encapsulate the object's data and define its state at any given point in time. By manipulating these attributes, we can interact with and modify the object's behavior and perform various operations on it.
In conclusion, instantiation is the process of creating an object from a class, and attributes are the data elements that define and represent the state of the object, allowing it to manipulate and store data.
To learn more about object-oriented programming click here:
brainly.com/question/28732193
#SPJ11
Question 3.4 ONLY
Three 3) hikers Moses, Elizabeth, and Wag have just descended down a valley to find themselves confronted by a river they cannot get across. After walking downstream for a while, they find two young boys with a boat and ask them if they would help them get across the river. The boys agree, but inform the hikers that since their boat is so small, it can only hold only the two boys or one ofthe hikers at a time. We can assume that everyone knows how to row the boat. (3.1) Define a state using a mathematical notation pictures or any form of graphical notation will not be accepted). Discuss the appropriateness of your choice, and provide an exampleto show that it will be suitable to be employed during a search. (3.2) Define the start and goal states using your representation. (3.3) Define an appropriate cost function or functions for this problem. (3.4) Provide a formal definition of a valid action function for this problem - you need not provide a formal definition for the operation of the function. Discuss the operation of the function and provide an example to illustrate its use.
1. The state in this problem can be represented using a binary notation where each bit represents the presence or absence of each person (Moses, Elizabeth, and Wag) on either side of the river. This representation is appropriate as it captures the essential information about the location of the hikers and allows for easy manipulation during a search algorithm.
2. The start state would be when all three hikers are on one side of the river, and the goal state would be when all three hikers have successfully crossed to the other side.
3. The cost function for this problem could be defined as the number of trips required to transport all hikers to the other side. Each trip across the river would incur a cost of 1. The goal is to minimize the total cost.
4. The valid action function for this problem would involve moving either one or two hikers from one side of the river to the other. It would consider all possible combinations of hikers' movements while adhering to the constraint that there can be no more than two people on the boat at any given time. The function would generate valid actions based on the current state and the positions of the hikers.
1. The state can be represented using a binary notation where each bit represents the presence (1) or absence (0) of each person on either side of the river. For example, if Moses, Elizabeth, and Wag are on one side of the river, the state would be represented as 111. This representation is appropriate as it captures the essential information about the location of the hikers and allows for easy manipulation during a search algorithm.
2. The start state would be when all three hikers are on one side of the river, represented as 111. The goal state would be when all three hikers have successfully crossed to the other side, represented as 000.
3. The cost function for this problem can be defined as the number of trips required to transport all hikers to the other side. Each trip across the river would incur a cost of 1. The goal is to minimize the total cost, which represents the total number of trips made.
4. The valid action function for this problem would involve moving either one or two hikers from one side of the river to the other. The function would consider all possible combinations of hikers' movements while adhering to the constraint that there can be no more than two people on the boat at any given time. For example, a valid action could be moving Moses and Elizabeth to the other side, resulting in a new state of 001. The function would generate valid actions based on the current state and the positions of the hikers, allowing for exploration of the search space.
To learn more about Algorithm - brainly.com/question/21172316
#SPJ11
The following C program reads a byte of data from Port B, finds the square, wait for two second and then send it to Port C.
Debug the errors in the following C program for the PIC16 microcontroller and write the corrected program. (2marks per error identified and correction) #include
void MAIN (void)
{
unsigned char;
TRISD = 0x00;
TRISB = 0x00;
while (1)
readbyte = PORTB;
readbyte = readbyte
__delay_ms(2000);
readbyte = PORTD;
}
}
The errors in the C program and the corrected program: The variable readbyte is declared as an unsigned char, but it is used to store the square of the data read from Port B.
The square of an unsigned char can be a unsigned int, so the variable readbyte should be declared as an unsigned int.
The line readbyte = readbyte * readbyte; is missing a semicolon at the end.
The line __delay_ms(2000); should be inside the while loop.
Corrected program:
C
#include <pic16.h>
void main(void) {
unsigned int readbyte;
TRISD = 0x00;
TRISB = 0x00;
while (1) {
readbyte = PORTB;
readbyte = readbyte * readbyte;
__delay_ms(2000);
PORTD = readbyte;
}
}
The first error is that the variable readbyte is declared as an unsigned char, but it is used to store the square of the data read from Port B. The square of an unsigned char can be a unsigned int, so the variable readbyte should be declared as an unsigned int.
The second error is that the line readbyte = readbyte * readbyte; is missing a semicolon at the end. This will cause the compiler to generate an error.
The third error is that the line __delay_ms(2000); should be inside the while loop. This is because the delay of 2000 milliseconds should only occur while the program is looping.
The corrected program fixes these errors and also adds a semicolon to the end of the line readbyte = readbyte * readbyte;. The corrected program will now compile and run without errors.
To know more about data click here
brainly.com/question/11941925
#SPJ11
Take the hard coded binary search tree from lab 6a and make two new functions that visit each node and displays the contents of a binary search tree in order. 1. A recursive function that outputs contents in order. 2. An iterative function that outputs contents in order. Hard code and no Ul on this lab. Here is the pseudo code found on Wikipedia : In-order [edit] inorder(node) if (node == null) return inorder(node.left) visit(node) inorder(node.right) iterative Inorder(node) s + empty stack while (not s.isEmpty() or node = null) if (node = null) s.push(node) node + node.left else node + s.pop() visit(node) node - node.right
To display the contents of a binary search tree in order, you can implement two functions: a recursive function and an iterative function. The recursive function will traverse the tree in a recursive manner and output the contents in order. The iterative function will use a stack to simulate the recursive traversal and output the contents in order.
1. Recursive Function:
The recursive function follows the in-order traversal approach. It visits the left subtree, then the current node, and finally the right subtree. The function is called recursively on each subtree until reaching the leaf nodes. At each node, the function will output the contents. This process ensures that the contents are displayed in order.
2. Iterative Function:
The iterative function also follows the in-order traversal approach but uses a stack to mimic the recursive calls. It starts with an empty stack and a current node set to the root of the binary search tree. While the stack is not empty or the current node is not null, it either pushes the current node onto the stack (if not null) or pops a node from the stack and visits it. After visiting a node, the function moves to the right subtree of that node.
By implementing both of these functions, you can display the contents of a binary search tree in order. The recursive function provides a straightforward and intuitive approach, while the iterative function offers an alternative using a stack for iterative traversal.
Learn more about Recursive Function here: brainly.com/question/29287254
#SPJ11
i need help with questions 7 and 8 please Problem 2 For each of the following six program fragment, give an analysis of the running time in Big-Oh notation.
(1) sum = Ꮎ ; for(i 0; i < n; i++) = sum++;
(2) sum = 0; for (i 0; i < n; i++) = for(j 0; j < n; j++) = sum++;
(3) sum =
for (i 0; i < n; i++) = for(j 0; j < n n; j++) = sum++; *
(4) sum = 0;
for (i 0; i < n; i++) = for(j 0; j < i; j++) = sum++; (5) sum = 0; for(i = 0; i < n; i++) for(j 0; j < i * i; j++) = for (k 0; k < j; k++) = sum++;
(6) sum =
for(i 1; i < n; i++) = for(j 1; j < i * i; i++) = if (j % i 0 ) == for (k 0; k < j; k++) =
sum++;
(7)
int sum (int n) { if n == 1 { return 1; } return n + sum (n-1); }
(8)
int sum (int n)
if (n<= 1)
return 1;
else
return n + sum ( (3*n) /5); }
Here are the analyses of the running time in Big-Oh notation for each program fragment:
(1) This program has a single loop that runs n times. Therefore, its running time is O(n).
(2) This program has two nested loops that both run n times. Therefore, its running time is O(n^2).
(3) This program also has two nested loops that both run n times. However, the inner loop only runs up to j=n, which means it runs n-1 times. Therefore, the total running time is O(n*(n-1)) = O(n^2).
(4) This program also has two nested loops. However, in this case, the inner loop only runs up to i-1, which means it runs fewer times as i increases. The total number of iterations can be found by adding up 1+2+...+(n-1), which equals n(n-1)/2. Therefore, the running time is O(n^2).
(5) This program has three nested loops. The outermost loop runs n times, the middle loop runs i^2 times (where i is the current value of the outermost loop), and the innermost loop runs j times (where j is the current value of the middle loop). Therefore, the total running time is O(n^3).
(6) This program also has three nested loops. The outermost loop runs n-1 times, the middle loop runs i^2 times (where i is the current value of the outermost loop), and the innermost loop runs up to j/i times. Therefore, the total running time is O(n^3).
(7) This program uses recursion to calculate the sum of numbers from 1 to n. Each recursive call decrements n by 1 until it reaches the base case where n == 1. Therefore, the total number of recursive calls is n. Each call takes a constant amount of time, so the running time is O(n).
(8) This program also uses recursion to calculate the sum of numbers from 1 to n, but with a different function. Each recursive call decreases n by a factor of 5/3 until it reaches the base case where n <= 1. Therefore, the total number of recursive calls can be found by solving the equation n * (5/3)^k = 1 for k, which gives k = log(n)/log(5/3). Since each call takes a constant amount of time, the running time is O(log n).
Learn more about Big-Oh notation here:
https://brainly.com/question/27985749
#SPJ11
Write HASKELL definitions for the following functions: 1. order a b c: returns a ternary tuple (tuple with 3 parts) of a, b and c such that the first element is less-or-equal the second, and the second is less-or-equal the third element. For example, order 4 2 3 should return (2,3,4). 2. fltr f lst: returns the list consisting of members of lst that make the function f return True when applied to it. For example, fltr even [1,2,2,5,8,4] should return [2,2,8,4]. f can be any function that takes one parameter of the same type as list elements. 3. compute lst: lst is a list of pairs of numbers, and the anwser is a list formed as follows – if the first component is smaller than the second one, then their multiplication is in the resut. Otherwise, their addition is in the result. 1. Example 1: compute [(2,3),(8,4),(4,6)] should return [6,12,24]. 2. Example 2: compute [(8,7),(1,1),(4,5),(2,5)] should return [15,2,20,10]. 4. eliminate lst: returns a list, obtained from lst, such that a is in the result only if it is smaller than the next element that follows it in lst. For example, eliminate [4,3,6,5,7,9,6] should return [3,5,7]. Note that the last element of lst will never be in the result, because there is no other element after it. (hint: use the pattern (x:(y:t)) to access the first and second elements in front of the list. Or you can use head and tail functions.) 5. gpa lst: computes the gpa in a given semester, given a list of (course,credit,grade) tuples. An ‘A’ counts as 4, ‘B’ counts as 3, ‘C’ counts as 2 and ‘D’ counts as 1. Example: gpa [("cmse318",4, ‘A’), ("math163",3, ‘C’)] should return 3.14 ((4*4+2*3)/7). 6. howmany elem a_list: returns how many elems are in a_list. For example, howmany 'b' ['a', 'b', 'c', 'b', 's'] should return 2. 7. pair_lists list1 list2: returns a list of pairs, where the first component of a pair in position i is in position i of list2 and the second component of a pair in position i is in position i of list1. For example, pair_lists [3,4,5] [10,20,30] should return [(10,3),(20,4),(30,5)]. You can assume that the two lists have the same size. 8. classify_g n: returns a letter grade based upon a numeric grade, according to the following schema: n>=90 'A', 80=90 'A', 80<=n<=89 'B', 70<=n<79 'C', otherwise 'D'. For example, classify_i 87 should return 'B'. Define classify_i with the if expression to implement this function. 10. first_odds n: returns a list of the first n odd numbers. For example, first_odds 5 should return [1,3,5,7,9].
These are Haskell function definitions that perform various tasks, such as sorting a ternary tuple, filtering a list based on a function, computing products/sums based on pairs in a list, and more.
1. `order a b c = (x, y, z) where [x, y, z] = sort [a, b, c]`
2. `fltr f lst = [x | x <- lst, f x]`
3. `compute lst = [if x < y then x*y else x+y | (x,y) <- lst]`
4. `eliminate lst = [x | (x,y) <- zip lst (tail lst), x < y]`
5. `gpa lst = let (s, c) = foldl (\(s, c) (_, cr, gr) -> (s + cr * (case gr of 'A' -> 4; 'B' -> 3; 'C' -> 2; 'D' -> 1; _ -> 0)), c + cr)) (0,0) lst in s / c`
6. `how many elem a_list = length $ filter (==elem) a_list`
7. `pair_lists list1 list2 = zip list2 list1`
8. `classify_g n = if n >= 90 then 'A' else if n >= 80 then 'B' else if n >= 70 then 'C' else 'D'`
10. `first_odds n = take n [1,3..]`
To know more about Haskell function, visit:
brainly.com/question/15055291
#SPJ11
In a communication line using Stop-and-Wait ARQ for error control, the frames are assumed to be 1000 bits long and the bit error rate (BER) is assumed to be BER= 10^ -5 The probability of receiving a frame correctly is approximately:
(a) 0.99 (b) 9.9 (c) 10^ -5 (d) 1000x10 ^-6
The probability of receiving a frame correctly is approximately 0.99995.
In Stop-and-Wait ARQ, a frame is sent and the sender waits for an acknowledgment from the receiver before sending the next frame. If an acknowledgment is not received within a certain timeout period, the sender assumes that the frame was lost or corrupted and retransmits it.
To calculate the probability of receiving a frame correctly, we need to consider the bit error rate (BER) and the frame length.
Given:
Frame length (L) = 1000 bits
Bit error rate (BER) = 10^-5
The probability of receiving a frame correctly can be calculated using the formula:
P(correct) = (1 - BER)^(L)
P(correct) = (1 - 10^-5)^(1000)
P(correct) ≈ 0.99995
To know more about probability of receiving a frame here: https://brainly.com/question/29096313
#SPJ11
1-) data Direction = North | East | South West deriving (Show) data Robot Rover Direction Integer | Survey Integer [(Integer, String)] deriving (Show) artoo, hal :: Robot artoo = Survey 7 [(5,"dune"), (18,"swamp"), (25, "plans")] hal = Survey 0 [(3,"pod"), (-6,"bay")] pool, group: [Robot] pool [Rover East 10, Rover South 4, Survey 8 [(1,"")], Rover North 5] group = [Rover North 5, Rover West 17] For each case below, determine what happens in an attempt to match the pattern with the indicated data. • If the data fails to match the pattern for any reason, then write No match and briefly explain why the pattern match fails. If the data matches the pattern, then give the resulting value for the indicated name/variable. 1. Pattern: (_:w:g) Data: pool Give the resulting value for w. 2. Pattern: (Rover k v, m) Data: group Give the resulting value for m. 3. Pattern: (Survey n (a: (b, c):_)) Data: artoo Give the resulting value for b. 4. Pattern: ye(t:d) Data: [Rover West 3, Rover South 63] Give the resulting value for d. 5. Pattern: ((Survey i z):q) Give the resulting value for q. 6. Pattern: (_:_:u) Give the resulting value for u. Data: hal Data: group
1. Pattern: (_:w:g), Data: pool, Resulting value for w: Rover East 10 || 2. Pattern: (Rover k v, m), Data: group,Resulting value for m: Rover West 17 || 4. Pattern: ye(t:d), Data: [Rover West 3, Rover South 63], Resulting value for d: Rover South 63 || 5. Pattern: ((Survey i z):q), Data: No information provided, Resulting value for q: No match || 6. Pattern: (_:_:u), Data: hal, Resulting value for u: No match
The pattern (_:w:g) matches the data pool because the underscore (_) acts as a wildcard, matching any value. The first element of pool is Rover East 10, which matches the pattern. Therefore, w takes the value Rover East 10.
The pattern (Rover k v, m) matches the data group because the first element of group is Rover North 5, which matches the Rover constructor. The second element of group is Rover West 17, which matches the m variable in the pattern. Therefore, m takes the value Rover West 17.
The pattern (Survey n (a: (b, c):_)) matches the data artoo because artoo is a Survey with n = 7 and a list of tuples as the second argument. The first tuple in the list is (5, "dune"), and the second tuple is (18, "swamp"). The variable b in the pattern matches the second element of the first tuple, so **b takes the value 18**.
The pattern ye(t:d) does not match the data [Rover West 3, Rover South 63] because the pattern expects a list with at least two elements, but the data has only two elements. Since the pattern match fails, there is **no resulting value for d**.
The pattern ((Survey i z):q) requires the data to start with a Survey followed by a list. However, no data is given, so the pattern match cannot be determined. Therefore, there is no resulting value for q.
To know more about pattern : https://brainly.com/question/28580633
#SPJ11
Write a Scala program that given an array of integers, return a new array such that each element at index i of the new array is the product of all the numbers in the original array except the one at i.
The example usage demonstrates how to use the function with a sample input array and prints the resulting array.
Here's a Scala program that solves the given task:
scala
Copy code
def productExceptSelf(nums: Array[Int]): Array[Int] = {
val length = nums.length
val result = new Array[Int](length)
// Calculate the product of all elements to the left of each element
var leftProduct = 1
for (i <- 0 until length) {
result(i) = leftProduct
leftProduct *= nums(i)
}
// Calculate the product of all elements to the right of each element
var rightProduct = 1
for (i <- (length - 1) to 0 by -1) {
result(i) *= rightProduct
rightProduct *= nums(i)
}
result
}
// Example usage
val nums = Array(1, 2, 3, 4, 5)
val result = productExceptSelf(nums)
println(result.mkString(", "))
In this program, the productExceptSelf function takes an array of integers (nums) as input and returns a new array where each element at index i is the product of all the numbers in the original array except the one at index i.
The function first creates an empty array result of the same length as the input array. It then calculates the product of all elements to the left of each element in the input array and stores it in the corresponding index of the result array.
Next, it calculates the product of all elements to the right of each element in the input array and multiplies it with the corresponding value in the result array.
Finally, it returns the result array.
Know more input array here:
https://brainly.com/question/28248343
#SPJ11
Explore how automation is changing the way infrastructure networking is being managed. Explain the benefits and potential challenges as well as how this is shaping the future of network engineering as a discipline.
Automation is bringing about a significant change in the way infrastructure networking is managed. Traditional network management practices involve manual configurations, which are time-consuming and prone to errors.
Automation, on the other hand, allows for the provisioning and configuration of networks through software, reducing the time and effort required for these tasks.
One of the main benefits of automation in network engineering is increased efficiency. With automation tools, network engineers can quickly provision and configure networks, reducing the time it takes to set up new devices or make changes to existing ones. This translates into faster deployment times and better overall performance.
Another key benefit of automation is improved consistency and accuracy. Manual network configurations are often prone to mistakes, which can cause issues such as network outages or security breaches. Automation ensures that configurations are consistent across all devices and eliminates the risk of human error.
However, there are also potential challenges with implementing automation in network engineering. One challenge is the need for specialized skills and knowledge in programming and automation technologies. Network engineers who do not have experience with automation tools may require additional training to effectively implement them.
Another challenge is the potential for job displacement. As automation tools become more prevalent, some network engineering tasks may be automated, reducing the need for human intervention. This could lead to a shift in the roles and responsibilities of network engineers, requiring them to develop new skills and take on new responsibilities.
Overall, automation is shaping the future of network engineering as a discipline by enabling network engineers to focus on higher-level tasks, such as designing and optimizing networks, rather than spending their time on manual configurations. As automation technology continues to evolve, it will become increasingly important for network engineers to have a strong understanding of automation tools and techniques in order to remain competitive in the industry.
Learn more about infrastructure networking here:
https://brainly.com/question/28504613
#SPJ11
2. Identify/list the parameters that will pipe "ByValue" and "ByPropertyName"for the following cmdlets. Adding showwindow may help filter the results (get-help xxx -showwindow, where xxx is the cmdlet) 1. get-process 2. stop-process 3. get-service 4. stop-service 3. Construct a command that will identify all processes running on your computer for longer than 1000 CPU seconds. Capture and submit a screen shot of your command. If the command returns nothing, reduce the number of seconds by 100 until you have output (my laptop did not return any output until it was reduced to 400, as I don't use it often). 4. Construct a command that will identify all services that are in a "stopped" state. Capture and submit a screen sho of the command and partial output. If you want to start all stopped services, how would you modify the command?
get-process: The ByValue parameter for this cmdlet is Name, which allows specifying process names as positional arguments.
stop-process: The ByValue parameter for this cmdlet is InputObject, which allows piping process objects to stop.
get-service: The ByValue parameter for this cmdlet is Name, which allows specifying service names as positional arguments.
stop-service: The ByValue parameter for this cmdlet is InputObject, which allows piping service objects to stop.
get-process: The ByValue parameter Name allows specifying the process names as positional arguments, meaning you can provide process names directly without explicitly mentioning the parameter name. For example, get-process explorer will retrieve the details of the "explorer" process.
stop-process: The ByValue parameter InputObject allows piping process objects to stop. This means you can use the output from other cmdlets or commands and pipe it to stop-process to stop those specific processes. For example, get-process | stop-process will stop all the processes returned by get-process.
get-service: The ByValue parameter Name allows specifying the service names as positional arguments. Similar to get-process, you can directly provide service names without explicitly mentioning the parameter name. For example, get-service WinRM will retrieve the details of the "WinRM" service.
stop-service: The ByValue parameter InputObject allows piping service objects to stop. You can pipe service objects to this cmdlet and stop the specified services. For example, get-service | where {$_.Status -eq 'Running'} | stop-service will stop all the running services returned by get-service.
To learn more about CPU
brainly.com/question/31034557
#SPJ11
You have a file "word.txt" which contains some words. Your task is to write a C++ program to find the frequency of each word and store the word with its frequency separated by a coma into another file word_frequency.txt. Then read word_frequency.txt file and find the word which has the maximum frequency and store the word with its frequency separated by a coma into another file "max_word.txt". Your program should contain the following functions: 1) read function: to read the data.txt and word_frequency.txt file into arrays when needed. 2) write function: to write the results obtained by frequency function and max function in word_frequency.txt and max_word.txt respectively, when needed. 3) frequency function: to find the frequency of each word. 4) max function: to find the word with maximum frequency (use header file iostream fstream and strings only
A C++ program will read "word.txt" to find the frequency of each word and store the results in "word_frequency.txt". It will also determine the word with the highest frequency and save it in "max_word.txt".
The program will begin by implementing the read function to read the data from "word.txt" and load it into appropriate data structures such as an array or a vector. This will allow us to process the words efficiently. The function may also read any existing data from "word_frequency.txt" to preserve previous results.Next, the frequency function will be implemented to calculate the frequency of each word. It will iterate over the words in the array, keeping track of their occurrences in a suitable data structure like a map or unordered_map. For each word encountered, its count will be incremented in the data structure.
Once the frequencies are calculated, the write function will be called to write the word-frequency pairs to "word_frequency.txt". It will iterate over the data structure and write each word-frequency pair, separated by a comma, into the file.Afterward, the max function will be implemented to find the word with the maximum frequency. It will iterate over the data structure storing the word-frequency pairs and keep track of the maximum frequency encountered. Along with that, it will also keep track of the corresponding word.
Finally, the write function will be invoked again to store the word with its maximum frequency in the "max_word.txt" file. This file will contain a single line with the word and its frequency separated by a comma.By utilizing these functions, the C++ program will successfully read the input, calculate the frequencies, and determine the word with the maximum frequency. The results will be stored in the respective output files, allowing for easy retrieval and analysis of the word frequencies.
To learn more about program click here
brainly.com/question/14368396
#SPJ11
Do you think that cell phones are hazardous to your health? If
yes, what is the route of exposure? If no, why do you think there
is no risk?
Yes, cell phones are hazardous to health. Therefore, it is essential to limit cell phone use and take precautionary measures to minimize exposure to radiation.
The route of exposure to cell phone radiation is through electromagnetic radiation that is emitted by cell phones.Cell phones work on radiofrequency (RF) waves that are a type of non-ionizing radiation. Although this type of radiation is less harmful compared to ionizing radiation like X-rays, it is still a concern as it is believed to affect human health. When you hold the cell phone near your ear or even keep it in your pocket, the electromagnetic radiation from the cell phone can penetrate through your skin, bone, and muscle tissues, which may result in negative effects on your health.
There have been various studies on the effects of cell phone radiation on human health, including cancer, infertility, and cognitive impairment. These effects occur due to the generation of heat from the radiation, which may damage cells and tissues. The longer the exposure, the greater the damage, which is why long-term cell phone use is considered a hazard to health.In conclusion, cell phones are hazardous to health due to their electromagnetic radiation, which may cause cancer, infertility, and cognitive impairment.
To know more about cell visit:
https://brainly.com/question/31199707
#SPJ11
A. static Match each of the BLANKs with their corresponding answer. Method calls are also called BLANKs. A variable known only within the method in which it's B. local declared is called a BLANK variable. C. Scope It's possible to have several methods in a single D. Overloading class with the same name, each operating on different types or numbers of arguments. This E. Overriding feature is called method BLANK. F. global The BLANK of a declaration is the portion of a G. protected program that can refer to the entity in the declaration by name. H. private • A BLANK method can be called by a given class or I. invocations by its subclasses, but not by other classes in the same package.
Object-oriented programming is a widely-used paradigm for developing software applications. To create effective object-oriented programs, developers must have a firm understanding of certain key concepts and terms. One such concept is the use of methods in classes.
Methods are code blocks that perform specific tasks when called. They are also referred to as functions or procedures. When a method is called, it executes a series of instructions that manipulate data and/or perform actions. Method calls are also known as invocations, and they are used to trigger the execution of a method.
A variable known only within the method in which it's declared is called a local variable. This type of variable has limited scope, meaning that it can only be accessed within the method in which it is defined. As a result, local variables are often used to store temporary values that are not needed outside of the method.
In object-oriented programming, it's possible to have several methods in a single class with the same name, each operating on different types or numbers of arguments. This feature is called method overloading, and it allows developers to reuse method names while still maintaining a clear and concise naming convention.
Method overriding is another important concept in object-oriented programming. It refers to the ability of a subclass to provide its own implementation for a method that is already defined in its superclass. This allows for greater flexibility and customization of functionality within an application.
The scope of a declaration is the portion of a program that can refer to the entity in the declaration by name. The scope of a global method extends throughout the entire program, meaning that it can be called by any part of the program. In contrast, a private method can only be called by a given class or invocations by its subclasses, but not by other classes in the same package.
Overall, a strong understanding of these key concepts related to methods in object-oriented programming is crucial for successful software development.
Learn more about programs here:
https://brainly.com/question/14618533
#SPJ11
9. #include int fun1(double a) { return (a); } int fun2(double x, double y) {
return(fun1(x)+fun1(y)): }
int main() { printf("%d\n", fun2(3.6, 2.4)); return 0; } This program will display______
A. 5 B. 6
C. 3.6
D. 2.4
The given program will display the value 5.
In the program, there are two functions defined: fun1 and fun2. The function fun1 takes a double parameter a and returns the value of a. The function fun2 takes two double parameters x and y and calls the fun1 function with x and y as arguments. It then adds the values returned by fun1(x) and fun1(y) together and returns the result.
In the main function, fun2 is called with arguments 3.6 and 2.4. Since fun1 simply returns its input value, fun1(3.6) will return 3.6 and fun1(2.4) will return 2.4. The fun2 function then adds these two values together, resulting in 5. Finally, the printf function is used to display the result, which is 5.
Learn more about program here : brainly.com/question/30613605
#SPJ11
None of the provided options (A, B, C, D) accurately represent the potential output of the program, as it depends on the undefined behavior resulting from attempting to print a double value as an integer.
The given program defines two functions, `fun1` and `fun2`, which perform simple mathematical operations. The `fun1` function takes a double value as input and returns the value itself. The `fun2` function takes two double values as inputs, calls `fun1` for each value, and returns the sum of the results. In the `main` function, `fun2` is called with arguments 3.6 and 2.4, and the program prints the result using the `printf` function. The correct output cannot be determined based on the provided code.
The `fun1` function simply returns the input value without any modifications. The `fun2` function calls `fun1` twice, passing the arguments `x` and `y`, and returns the sum of the results.
In the `main` function, `fun2` is called with arguments 3.6 and 2.4. However, the return type of `fun2` is specified as `int` in the function declaration, and the result of `fun2(3.6, 2.4)` is passed to `printf` with the format specifier `%d`, which is used for printing integers.
Since the program attempts to print an integer value using `%d` format specifier, but the actual result may be a double value, the behavior of the program is undefined. Therefore, we cannot determine the exact output of the program.
Therefore, none of the provided options (A, B, C, D) accurately represent the potential output of the program, as it depends on the undefined behavior resulting from attempting to print a double value as an integer.
Learn more about potential here : brainly.com/question/28300184
#SPJ11
My code seems to say "min() arg is an empty sequence" and i don't know what's wrong with it. Write a program that inputs a list of integers from the user, and removes the duplicate list elements, plus outputs their min and max values. Here is some sample output: Please enter some positive integers, hitting return after each one. Enter 'q' to quit: 2 You entered 2 unique numbers: 23 with minimum value: 2 and maximum value: 3 322NN D Hints and Rules • Your program should stop the input if anything other than a positive integer is entered. You may want to use the "isnumeric()" function and/or others described in the Python docs for string methods. Normally, you'd use .isnumeric() as a condition for an if-statement or while-loop of course. For example: X = "125" y = "1.25" print (x.isnumeric()) #True print (y.isnumeric()) #False Your program should have at least 2 functions, including a main() function (no global variables or global code other than a call to main) • If at least one positive integer is entered, your program should output the smallest (minimum) and largest (maximum) values in the list. • When the program is finished, the program must have a list that stores each number only once (without duplicates), in the same order they were entered. So you can't just skip outputting the duplicates - you have to remove them (or replace them) • Write your own loops to find the min, max, and to store a list without duplicates. Don't use built-in functions or code we haven't learned in class. def tellUnique (lists): ***This function takes in a list parameter and displays the unique elements in it along with the minimum and maximum values*** unique = [] for num in lists: if num not in unique: unique.append(num) print("You entered",len (unique), "unique numbers:") for num in unique: print (num, end=" ") print("\nThe min value is", min (unique)) print("The max value is",max(unique)) lists = [] print("Please enter some positive integers, hitting return after each one. Enter 'q' to quit: ") while (True): num = input() if num=="q": break if num.isnumeric ()==False: break if int(num) <0: break lists.append(int (num)) ____main___": def main(): if tellUnique (lists) name == main()
The provided code has a syntax error and is missing some essential parts. It attempts to call the tellUnique function before defining it, and there is an incorrect if-statement in the main function.
Additionally, the code does not properly handle the input and removal of duplicate elements.
To fix the code, you need to make a few modifications. First, define the tellUnique function before calling it in the main function. Inside the tellUnique function, create a new list to store unique elements. Iterate through the input list and add each element to the new list only if it is not already present. Then, print the number of unique elements and the minimum and maximum values using the min() and max() functions on the new list.
Next, update the main function to correctly call the tellUnique function. Instead of using the incorrect name == main(), simply call tellUnique(lists).
To handle input, modify the while loop condition to check if the input is numeric and positive before appending it to the lists list. This ensures that only positive integers are considered.
Finally, ensure that the main() function is called at the end of the code to execute the program.
To know more about programming click here : brainly.com/question/14368396
#SPJ11
Im learning about crystal agile but im not sure which one is accurate based on the colors, because I found different resource online that says things differently.
I will display both answers,
which one is accurate? the chart/online is also base off the book as well
---------------------------------------------------------
book/online
- Clear - 8 or fewer people.
- Yellow - 10 to 20 people.
- Orange - 20 to 50 people.
- Red - 50 to 100 people
Chart/online:
- Clear - 1 to 6
- Yellow - 7 to 20 people.
- Orange - 20 to 40 people.
- Red - 40 to 80 people
- maroon - 80 to 100
Both sources provide different ranges for team sizes in Crystal Agile. The book/online resource categorizes the team sizes in larger ranges, while the chart/online resource offers more specific ranges for each color category.
The accurate representation of team sizes in Crystal Agile methodology can vary depending on the source. According to the book/online resource, the team sizes are categorized as follows: Clear (8 or fewer people), Yellow (10 to 20 people), Orange (20 to 50 people), and Red (50 to 100 people). However, the chart/online resource presents a slightly different breakdown: Clear (1 to 6 people), Yellow (7 to 20 people), Orange (20 to 40 people), Red (40 to 80 people), and Maroon (80 to 100 people). The accurate representation may depend on the specific version or adaptation of Crystal Agile being followed. It's recommended to consult the primary source or refer to recognized experts in Crystal Agile for the most accurate and up-to-date information on team size classifications.
Learn more about chart here: brainly.com/question/29790710
#SPJ11
Let's say you are tasked with writing classes and/or interfaces in Java for the following: • The data type Bird is a generic type for any kind of bird. A Bird cannot be created without it being a more specific type of Bird. • A Bird instance can take off for flight by calling its public void takeoff() method. The Bird type does not supply an implementation of this method. • Eagle is a subtype of Bird. Every Eagle instance has its own wingSpan data field (this is a double). • Eagle overrides method takeOff(). • A LakeAnimal is a type that represents animals that live at a lake. It contains the method public void swim(). LakeAnimal does not supply an implementation of this method. • Both Bird and Lake Animal do not have any data fields. • Loon is a subtype of both Bird and LakeAnimal. Loon overrides method takeoff () and method swim(). • The Loon type keeps track of the maximum dive depth among all Loon instances. This is stored in a variable of type double called maxDiveDepth. • Both Eagle and Loon have constructors that take no arguments. (a) Is is better to create the Bird type as a class or an interface? Explain your reasoning. (a) Is is better to create the Bird type as a class or an interface? Explain your reasoning. (b) Should the LakeAnimal type be a class or an interface? Explain your reasoning (c) Should type Eagle be a class or an interface? Explain your reasoning. (d) Should the data field wingSpan of type Eagle be static? Explain your reasoning
The wingSpan field should not be declared as static to maintain individuality and uniqueness for each Eagle object.
(a) The Bird type should be created as an interface.
Reasoning:
Since a Bird cannot be created without it being a more specific type of Bird, it implies that Bird itself is an abstract concept representing a common behavior shared by various bird species. By defining Bird as an interface, we can establish a contract specifying the common methods that any specific bird type should implement, such as the takeoff() method. This allows different bird species to implement their own behavior while adhering to the common interface.
(b) The LakeAnimal type should be created as an interface.
Reasoning:
Similar to the Bird type, LakeAnimal represents a common behavior shared by animals that live at a lake. By defining LakeAnimal as an interface, we can specify the swim() method that all lake animals should implement. This allows for flexibility in defining different lake animal species that may have their own specific implementations of swimming behavior.
(c) The type Eagle should be created as a class.
Reasoning:
Eagle is described as a specific subtype of Bird. It has its own data field, wingSpan, which suggests that Eagle should be a concrete class that extends the abstract concept of Bird. By creating Eagle as a class, we can provide the specific implementation of the takeoff() method required for an Eagle, along with the additional data field and any other specific behaviors or characteristics of an Eagle.
(d) The data field wingSpan of type Eagle should not be static.
Reasoning:
The wingSpan data field represents an individual characteristic of each Eagle instance. If the wingSpan field were declared as static, it would be shared among all instances of Eagle. However, each Eagle should have its own unique wingSpan value.
Therefore, the wingSpan field should not be declared as static to maintain individuality and uniqueness for each Eagle object.
Learn more about interface here:
https://brainly.com/question/28939355
#SPJ11
17. 10pts) Prove the following statement . (alb^b\c) →a|c
To prove that the statement `(aᵇ/b↴c) →a|c` is true, we can use a direct proof. Here's how:Direct proof: Assume `(aᵇ/b↴c)` is true. This means that `a` and `b` are integers such that `b` divides `a`.Also, `b` and `c` are integers such that `c` divides `b`.
We want to show that `a` and `c` are integers such that `c` divides `a`.Since `b` divides `a`, we can write `a` as `a = kb` for some integer `k`.
Substituting `a = kb` in `(a^b/b↴c)`, we get:`(kbᵇ/b↴c)`
Since `c` divides `b`, we can write `b` as `b = lc` for some integer `l`.
Substituting `b = lc` in `(kbᵇ/b↴c)`, we get:`(klcᵇ/lc↴c)`
Simplifying, we get:`(kcᵇ/c)`Since `c` divides `kc`, we can write `kc` as `a` for some integer `m`.
Substituting `kc = a` in `(kcᵇ/c)`, we get:`(aᵇ/c)`Since `c` divides `a`, we have shown that `(aᵇ/b↴c) →a|c` is true.
To know more about integers visit:
https://brainly.com/question/32581284
#SPJ11
G+ circle.cpp 1 #include "circle.h" 2 #include < 3 4 Circle::Circle() { 5 this->setRadius (MIN); 6 } 7 8 Circle::Circle(float r){ | this->setRadius (r); 9 10 } 11 12 Circle::~Circle() { 13 14 } 15 16 float Circle::getRadius () { return this->radius; 17 18 } 19 20 float Circle::getArea() { 21 22 N♡NHENGAM 23 24 25 26 27 28 29 30 return (M_PI) * this->radius * this->radius; float Circle::setRadius(float radius) { if (radius < MIN) { | std::cout << "Pleas enter a valid value!!" << std::endl; } else{ this->radius = radius; 31 32 } 33 C circle.h 1 #ifndef CLASSES_CIRCLE_H 2 #define CLASSES_CIRCLE_H 3 4 #define MIN Ø 5 6 class Circle{ 7 v protected: 8 float radius; 9 public: Circle(); Circle(float r); ~Circle(); float getRadius(); float getArea(); void setRadius(float radius); unpau5 6 7 18 19 2812228 10 11 12 13 14 15 16 17 20 }; 23 #endif //CLASSES_CIRCLE_H circle.cpp:24:7: error: no declaration matches 'float Circle::setRadius(float)' 24 | float Circle::setRadius(float radius) { I Anniinin In file included from circle.cpp:1: circle.h:19:14: note: candidate is: 'void Circle::setRadius(float) void setRadius(float radius); 19 | I Anninininininin circle.h:6:7: note: 'class Circle' defined here 6 class Circle{ | Annininin
The code provided includes a class called Circle with member functions defined in the circle.cpp file and declarations in the circle.h file. The Circle class has a default constructor, a parameterized constructor, a destructor, and member functions to get the radius, calculate the area, and set the radius of the circle.
In the circle.cpp file, there is an error on line 24 where the implementation of the setRadius function does not match the declaration in the circle.h file. The declaration specifies that the setRadius function has a void return type, but in the implementation, it is defined as returning a float. This mismatch is causing a compilation error.
To fix the error, the setRadius function in the circle.cpp file should be modified to have a void return type to match the declaration in the circle.h file.
Additionally, there are some lines in the code that appear to be incomplete or contain unrelated characters, such as "N♡NHENGAM" and "unpau5 6 7 18 19 2812228". These lines should be reviewed and corrected if necessary.
It's important to carefully review and revise the code to ensure proper syntax and logic before attempting to compile and run it.
To know more about code, visit:
https://brainly.com/question/17204194
#SPJ11
Task: We're creating an application to generate the Hoosier Lottery numbers, using a for loop and a while loop. You will have to think about how to generate random numbers between 1 and some upper limit, like 49... Create an algorithm and use this in your solution. As before, you can use console.log to log the number to the console. Part 1: Create a for loop that executes exactly 6 times. • In the body of the loop, generate a random number between 1 and 49, inclusive. • Save the random number to a string, using the same techniques we used for this week's example (times tables) When the loop exits, display the string in a heading on the web page. Part 2: • Create a while loop that executes exactly 6 times. • In the body of the loop, • generate a random number between 1 and 49, inclusive. Save the random number to a string, using the same techniques we used for this week's example (times tables) • When the loop exits, display the string in a heading on the web page.
The task is to create an application that generates Hoosier Lottery numbers using a for loop and a while loop. In the first part, a for loop is used to execute exactly 6 times. Within the loop, a random number between 1 and 49 is generated and saved to a string. The string is then displayed as a heading on the web page. In the second part, a while loop is used with the same execution count of 6. Inside the loop, a random number is generated and saved to a string. Finally, the resulting string is displayed as a heading on the web page.
To accomplish this task, you can use JavaScript to implement the for loop and while loop. In the for loop, you can initialize a loop counter variable to 1 and iterate until the counter reaches 6. Within each iteration, you can generate a random number using the Math.random() function, multiply it by 49, round it down using Math.floor(), and add 1 to ensure the number falls within the desired range of 1 to 49. This random number can be appended to a string variable using string concatenation.
Similarly, in the while loop, you can set a loop counter variable to 1 and use a while loop condition to execute the loop exactly 6 times. Inside the loop, you can generate a random number in the same way as described earlier and append it to the string variable.
After the loops finish executing, you can display the resulting string containing the lottery numbers as a heading on the web page using HTML and JavaScript.
Learn more about JavaScript here: brainly.com/question/29897053
#SPJ11
Please solve as much as you are willing to. It's an extra credit assignment so as seen at the top of the first screenshot, using outside help doesn't violate student conduct rules.
thank you!
Rules: Essentially none. You may work in groups, you may use any resource available to you, and you may ask me for help. Show your work! Due: May 2 at 5pm This assignment is an exercise in finding the average-case complexity of an algorithm. Rather than looking at how long an algorithm can run in the worst case as in worst- case analysis, we are looking at how long an algorithm runs on average. This is done by computing the average number of comparisons and operations executed until the algorithm ends. Bogosort is a sorting algorithm that orders a list in increasing order by taking the list, checking to see if the list is ordered increasingly, if the list is not ordered increasingly then the list is randomly shuffled, and then repeating this process until the list is ordered increasingly. Expressed in pseudocode: Algorithm 1 Bogosort Require: list: a1, a2,...,an of real numbers Ensure: list is sorted in increasing order 1: procedure BOGO(list) 2: while not sorted (list) do ▷ Checks to see if list is sorted 3: shuffle (list) ▷ Shuffle the current list if not sorted 4. end while 5: end procedure Problems 1. Describe a worst-case performance for bogosort. We will now find the average-case time complexity for bogosort where we are ordering the list a1, a2,..., an. We begin by finding the average number of shuffles needed to order the list. 2. What is the probability that a list a1, a2,..., an is ordered? 3. Consider the Bernoulli trial where a success is that a random permutation of a1, a2, ..., an is ordered and a failure that a random permutation of a1, a2,..., an is not ordered. What is the probability of success? What is the probability of failure? 4. Define a random variable X where X is the number of shuffles of a1, a2,..., an until a success. What is P(X = k), that is, what is the probability that the first success happens on the kth shuffle? 5. Compute the expected number of shuffles until the first success. You may need the following sum formula: 8 T Σ(k + 1)pk = + 1 1-r (1 — r)² ° k=0 After each shuffling of the list, we need to check the number of comparisons done. To simplify things, we will assume that we compare all consecutive entries in the shuffled list. 6. How many comparisons are made when checking if a shuffled list is ordered? 7. Combine 5. and 6. to give a big-O estimate for the average time complexity of bogosort. Notice that the worst-case time complexity and average-case time complexity for bo- gosort are different!
Bogosort is a sorting algorithm that repeatedly shuffles a list and checks if it is sorted. In this extra credit assignment, the task is to analyze the average-case complexity of Bogosort. The problem involves finding the average number of shuffles needed to sort a list and the number of comparisons made during the sorting process. The probability of a list being ordered, the probability of success and failure in a Bernoulli trial, and the expected number of shuffles until the first success are calculated. The average time complexity of Bogosort is then estimated based on the number of comparisons made and the expected number of shuffles.
To determine the average-case time complexity of Bogosort, several calculations need to be performed. Firstly, the probability that a list is ordered is determined. This probability is the ratio of the number of ordered permutations to the total number of possible permutations. Next, the probability of success (an ordered permutation) and failure (a non-ordered permutation) in a Bernoulli trial are computed.
A random variable X is defined to represent the number of shuffles until a success occurs. The probability distribution of X is determined, specifically the probability P(X = k), which represents the probability that the first success happens on the kth shuffle. Using the given sum formula, the expected number of shuffles until the first success is computed.
Additionally, the number of comparisons made when checking if a shuffled list is ordered is determined. Assuming all consecutive entries are compared, the average number of comparisons per shuffle can be calculated.
By combining the expected number of shuffles and the average number of comparisons per shuffle, an estimation of the average time complexity of Bogosort in big-O notation can be provided. This estimation represents the average-case behavior of the algorithm. It's important to note that the worst-case and average-case time complexities for Bogosort are different, indicating the varying performance of the algorithm in different scenarios.
To learn more about Probability - brainly.com/question/31828911
#SPJ11
Bogosort is a sorting algorithm that repeatedly shuffles a list and checks if it is sorted. In this extra credit assignment, the task is to analyze the average-case complexity of Bogosort. The problem involves finding the average number of shuffles needed to sort a list and the number of comparisons made during the sorting process. The probability of a list being ordered, the probability of success and failure in a Bernoulli trial, and the expected number of shuffles until the first success are calculated. The average time complexity of Bogosort is then estimated based on the number of comparisons made and the expected number of shuffles.
To determine the average-case time complexity of Bogosort, several calculations need to be performed. Firstly, the probability that a list is ordered is determined. This probability is the ratio of the number of ordered permutations to the total number of possible permutations. Next, the probability of success (an ordered permutation) and failure (a non-ordered permutation) in a Bernoulli trial are computed.
A random variable X is defined to represent the number of shuffles until a success occurs. The probability distribution of X is determined, specifically the probability P(X = k), which represents the probability that the first success happens on the kth shuffle. Using the given sum formula, the expected number of shuffles until the first success is computed.
Additionally, the number of comparisons made when checking if a shuffled list is ordered is determined. Assuming all consecutive entries are compared, the average number of comparisons per shuffle can be calculated.
By combining the expected number of shuffles and the average number of comparisons per shuffle, an estimation of the average time complexity of Bogosort in big-O notation can be provided. This estimation represents the average-case behavior of the algorithm. It's important to note that the worst-case and average-case time complexities for Bogosort are different, indicating the varying performance of the algorithm in different scenarios.
To learn more about Probability - brainly.com/question/31828911
#SPJ11
2 10 (a) Develop an android application with two buttons and intent properties. The activities which have to be performed are as follows: 1. During the click of button 1, the Bing search engine page should be displayed. 2. On clicking button 2, the yahoo email service should get opened
An Android application will be developed with two buttons and intent properties. Clicking button 1 will display the Bing search engine page, while clicking button 2 will open the Yahoo email service.
To develop an Android application with two buttons and intent properties, you can follow the steps below:
1. Create a new Android project in your preferred development environment (such as Android Studio).
2. Open the layout XML file for your main activity and add two buttons with appropriate IDs and labels.
3. In the Java file for your main activity, declare the button variables and initialize them using `findViewById`.
4. Set click listeners for each button using `setOnClickListener`.
5. Inside the click listener for button 1, create an Intent object with the action `Intent.ACTION_VIEW` and the URL for Bing search engine (https://www.bing.com). Start the activity using `startActivity(intent)`.
6. Inside the click listener for button 2, create an Intent object with the action `Intent.ACTION_VIEW` and the URL for Yahoo email service (https://mail.yahoo.com). Start the activity using `startActivity(intent)`.
By implementing the above steps, when you click button 1, it will open the Bing search engine page, and when you click button 2, it will open the Yahoo email service.
To learn more about Android application click here: brainly.com/question/29427860
#SPJ11