Answer:
C
Explanation:
because an ice is a solid and when it melts it becomes a liquid
Answer:
C
Explanation:
1) Which example shows a change in a state
of matter?
A. Liquid pouring
2
B. Wood Burning
1
C. Ice Melting
C when ice melts it goes from a solid to a liquid state
A chemist makes up a solution by dissolving 42.0 g of Mg(NO3)2 in enough water to produce a final solution volume of 213 mL. To calculate the molarity of the solution, what additional information is needed
Answer:
the molar mass of Mg(NO3)2
the mass of the water added the density of the Mg(NO3)2
the volume of water used
Calculate the number of moles of Mg(NO3)2 used to make up this solution. 42.0 g of Mg(NO3)2 is equivalent to___ mol Mg(NO3)2.
Now calculate the molarity of the solution, giving your answer to the correct number of significant digits.
Molarity of Mg(NO3)2 = ___M
375cm³ of a gas has a pressure of 770 mm Hg, find it Volume if the pressure is reduced to 750 mm Hg
Answer:
Explanation:
Givens
v1 = 375 cm^3
P1 = 770 mm Hg
V2 = ?
P2 = 750 mm Hg
Formula
V1 P1 = V2 P2
Solution
375 * 770 = V2 * 750 Combine the left
288750 = V2 * 750 Divide both sides by 750
288750/750 = V2
V2 = 385
Calculate the amount of energy That an obsect Can absorb from Yellow light Whose wave length is 589 nm.
Explanation:
E = hf
c= f × lamda
f= c/ lamda
c= speed of light
f= frequency
lamda = wavelength
E = h c/ lamda
E = 6.626 × 10^-34 Js × 3 × 10^8 ms-1 / 589 × 10^-9 m
= 3.37 × 10^15 J
What happens to the kinetic energy of the bowling ball when it reaches the pins?
Answer:
The bowling ball has kinetic energy as it moves toward the pins.
Explanation:
Answer:
Most of it is transferred to the pins, but some of it is changed into heat and sound energy.
Explanation:
study island
Suppose you are performing a titration. At the beginning of the titration, you read the titrant volume as 2.51 mL. After running the titration and reaching the endpoint, you read the titrant volume as 29.95 mL. What volume, in mL, of titrant was required for the titration
The volume of titrant required for the titration would be 27.44 mL
From the illustration, the initial titrant volume was 2.51 mL. This figure represents the initial reading on the burette.
In the same vein, the final volume of the titrant was 29.95 mL. This figure represents the final reading on the burette.
In order to get the volume of titrant used:
Volume of titrant used = final volume - initial volume
= 29.95 - 2.51
= 27.44 mL
More on the volume of titrant used in titrations can be found here: https://brainly.com/question/4250180
14. What type of materials are spun together to make yarns?
Answer:
cotton
Explanation:
which is typically spun into fine yarn for mechanical weaving or knitting into cloth.
Certain __________ metals like gold are found as pure metals rather than ores in the earth. Complete the sentence.
Answer:
nonreactive
Explanation:
How many atoms...
NAC2H3O2
Answer:
one Sodium (Na) atom, two oxygen (O) atoms, two carbon (C) atoms, and three hydrogens (H) atoms
Explanation:
Question 10
What is this structure name?
CH3 – CH2 - CH
CH – CH – CH2 - CH2
CH; CH – CH, -CH,
СН
CH3
cosh(-cosh(-CH
Simplify the expression using the symmetry of hyperbolic functions
cosh(cosh(CH))
Simplify the expression using the symmetry of hyperbolic functions
the answer is cosh(cosh(CH))
Help with this pretty please!
Answer:
10
Explanation:
Basically same as last question but the number is before the compound :)
what does feldspar mean?
Answer:
an abundant rock-forming mineral typically occurring as colorless or pale-colored crystals and consisting of aluminosilicates of potassium, sodium, and calcium.
Explanation:
Answer:
Feldspars are a group of rock-forming aluminium tectosilicate minerals, containing sodium, calcium, potassium or berium
a guy walks into a bar and sees a non-linear person. he says hey wt y=mx+b is this? he threw a sploddy gun grenade in the place. how many non-linear people did he hurt?
what are aliphatic alcohols and what differentes it from other alcohols
Answer: Lipids are one of the important nutrients needed by the body to supply energy and essential fatty acids required by the organism. Solid alcohols are a class of steroids, which are steroids containing hydroxyl groups. Lipids is a general term for oils, fats and lipids. 2, the characteristics are different: fat consists of c, h, o three elements. Fats are triacylglycerides made up of glycerol and fatty acids.
my sheesh hurts my sheesh hurtsmy sheesh hurtsmy sheesh hurtsmy sheesh hurtsmy sheesh hurtsmy sheesh hurtsmy sheesh hurtsmy sheesh hurtsmy sheesh hurtsmy sheesh hurtsmy sheesh hurtsmy sheesh hurtsmy sheesh hurtsmy sheesh hurtsmy sheesh hurts
Answer:
1
Explanation:
Answer:
Um.....
Explanation:
Thanks for the pts
✌️❤️✌️
how to draw ethyl structural formula?
Answer:
c2H5
Explanation:
H. H
|. |
C-C- H
|. |
H. H
Hey :3 please help with this. Will mark brainlist if you’re right
Answer: 4
Explanation:
buna, am nevoie de un site de facut proiecte
Answer:
translation to English please
name 2 elements that are liquid at room temperature and describe their colour
Answer:
Bromine
Mercury
Bromine (symbol Br and atomic number 35) is a reddish-brown liquid, with a melting point of 265.9 K. Mercury (symbol Hg and atomic number 80) is a toxic shiny silvery metal, with a melting point of 234.32 K.
plzz help me cant remember the parts of the flower.
A is the petal and b is the leaf. I think.
If a barometer were built using water (d=1.0 g/cm3) instead of mercury (d=13.6 g/cm3), would the column of water be higher than, lower than, or the same as the column of mercury at 1.00 atm? If the level is different, by what factor? Explain.
Mercury is a compound denser than water and when this happen, it stays lower.
So, in this case, water stays higher than mercury because its density is low.
The level is different by a factor of 13.6 times taller.
A gas has a volume of 1140 ml at 37 ºC and 620 mm Hg pressure. Calculate its volume at STP.
1.900
2.800
3.819
4.1000
Answer:
3. 0.819L (819 mL)
Explanation: Before we go about solving this, we need to do some conversions prior to using the gas law, the gas law is as follows...
P(atm)*V(L)=n(mol)*r(constant)*T(in kelvin)
So here are all the conversions you need.
620 mm Hg -> 0.816 atm
1140 mL -> 1.14 L
37 C -> 310.15 K
After plugging in our new converted values, we will proceed to solve the number of moles of the gas present, our n value, so our equation will look like this...(Note: Constant r in this case is 0.08206 L*atm/K*mol)
(0.816 atm)(1.14 L) = n(0.08206)(310.15)
Solving for n we get 0.03653 moles.
Now our second part is to figure out the volume AT STP (standard temperature/pressure). In the STP conditions, your temperature defaults to 0 C (273.15 K) and 1 atm. Now there is an easier way to do this, but I'll also show the more comprehensive way. Here is the easier method...
Since 1 mole of every gas occupies 22.4 L at STP, we can simply multiply this by our number of moles. So (22.4L)(0.3653 mol) to give us 0.818272.
However, a more accurate answer can be given like this...
Plugging n back into the same equation and this time resetting pressure to 1 atm and temperature to 273.15 K and conserving our number of moles we get...
(1 atm)(v) = (0.03653 mol)(0.08206)(273.15 K)
v = (0.03653)(0.08206)(273.15)
v = 0.8188 L = 0.819 L or 819 mL
HELPP PLISS :(
Achemist analyzes two samples. One sample contains 14 g of element X and 6.0 g of element Y. The second sample contains 28 g of element X and 6.0 g of element Y. Does it appear that the two samples are the same substance? Explain the reasons for your answer.
A chemist analyzes two samples. One sample contains 14 g of element X and 6.0 g of element
please fast but right no link or bot
List the metals that form only one type of ion (that is, metals whose charge is invariant from one compound to another). What are the group numbers of these metals
this question is in reference to the formation and naming of ionic compounds. Specifically, they want you to give examples of three ionic compounds with a metal to nonmetal ratio of 2 to 1. That means we need to have two metal atoms to metal ions, which are typically cat ions for every one non metal atom or an ion. In order for this to occur, we need to have the metal with half the charge of the nonmetal or the non metal with double the charge of the metal. So an example might be something like sodium sulfide. Sodium has one valence electron. It can give up sulfur needs to valence electrons in order to achieve an octet. So we need to. Sodium seems to give up one electron each to total so that sulfide can achieve an octet. Another one might be potassium oxide. Similar scenario. We've got potassium giving up one valence electron oxygen requiring too. So we need to potassium to supply the to valence electrons that oxygen needs to achieve an octet and lithium. Also in Group one A and alkali metal wants to give up just one valence electron to achieve an octet well to achieve, I guess a duet to be more like helium, and so it gives up one. If we have two of them, then we can provide the to valence electrons that sulfur needs. So this is sodium sulfide, potassium oxide and lithium sulfide. Remember when we name Ionic compounds? We named the Cat Ion with the name of the element and the anti on with the name of the Element, but with the ending oven of ID, a suffix of ID because each one of the cat ions donated their valence electrons to the anti on so the an ion could achieve an octet. Then all of the's will have an octet of valence electrons. Sulfur had six sodium had one. There were two of them, so we have a total of eight.
The metals that can form only one type of ion are Li, Al, Ca, Ba, Rb, W,Na, Mg and Sr. They are called alkali metals.
Cobalt, Co is stable in both +2 and +3 oxidation state. So it can variable.
Lithium, Li only have +1 charge. So it is invariable from one compound to other.
Lead, Pb is variable as it has +2, +4 charge in which it is stable.
Pd has +2, +4 charge in which it is stable. So, It is variable.
Copper, Cu has +1, +2 charge. It is also variable. Potassium, K has only +1 charge. It is invariable. Aluminum, Al has only +3 charge. It is invariable.
Cesium, Cs is only stable in +1 charge. It is invariable. Molybdenum, Mo is stable in +4 and +6. It is variable. Calcium, Ca and Barium Ba are stable in +2 charge. It is invariable.
Rubidium, Rb is stable in +1 charge. It is invariable. Tungsten, W is stable in +6 charge. It is invariable. Iron, Fe is stable in +2, +3 charge. It is variable. Sodium, Na is stable in +1 charge. It is invariable. Mg and Sr are stable in +2 charge. It is invariable. Vanadium, V has +2, +3, +4, +5 charges. So, It is variable.
To know more about alkali metals
https://brainly.com/question/18153051
#SPJ3
Nguyên tử X có tổng số hạt là 34, số khối X là 56. Điện tích hạt nhân của X là?
Answer:
can u tell the question in english
what do we call the cammell their
Answer:
You have to write the full question
What is the chemical composition of shale?
Answer:
30.8 percent quartz, 4.5 percent feldspar, 3.6 percent carbonate, <0.5 percent iron oxides, 60.9 percent clay minerals, 1 percent organic material, and 2 percent other materials.
Copper is an example of?
Transition Metal
Noble Gases
Alkali Metal
Halogen
Answer:
Transition Metal
Explanation:
If you look at a periodic table, you can see that Cu is a transition metal.
What would be the atomic number of this atom?
Answer:
1 would be the answer
protons = atomic # I think
Answer:
hydrogen
Explanation:
hydrogen has the atomic number of 1 which means that hydrogen has one proton and is neutral so it has one electron as well.
What is the difference between melting and burning a substance? Is mass conserved in either process?
Answer:
Explanation:
First Question:
Melting is a physical process that involves the phase transition of a substance from its solid to its liquid state. Burning, on the other hand, is a chemical process that involves a substance being broken down and changed into different substances. It's still the same substance, though: water.
Second Question:
Mass is therefore never conserved because a little of it turns into energy (or a little energy turns into mass) in every reaction. But mass+energy is always conserved. Energy cannot be created out of anything.