Answer:
Water
Explanation:
Solid potassium hydrogen tartrates (KHT) is soluble in water. This is especially at room temperature.
The solvent for KHT is water.
What is the molar concentration of H atoms at equilibrium if the equilibrium concentration of H2 is 0.28 M? Express your answer to two significant figures and include the appropriate units.
Answer:
0.56M
Explanation:
Molar concentration is defined as the ratio between moles of solute and volume in liters of solution.
In a 0.28M H₂ there are 0.28moles of H₂ per liter of solution.
Now, in 1 molecule of H₂ there are 2 atoms of H. Following this idea, in 0.28 moles of H₂ there are 0.28*2 = 0.56 moles of H atoms.
Thus, molar concentration of H atoms in a 0.28M H₂ is 0.56M
2.50 mol NOCl was placed in a 2.50 L reaction vessel at 400ºC. After equilibrium was established, it was found that 28% of the NOCl had dissociated according to the equation 2NOCl(g) 2NO(g) + Cl 2(g). Calculate the equilibrium constant, K c, for the reaction.
Answer:
Explanation:
2NOCl(g) ⇄ 2NO(g) + Cl 2(g)
C ( 1 - .28 ) .28 C .14 C
Kc = [ NO ]² x [ Cl₂ ] / [ NOCl ]²
= (.28 C )² x .14 C / C² ( 1 - .28 )²
= .021173 x C
C = concentration of reactant
= 2.5 / 2/5 = 1 M
Kc = .021173 x 1
= 211.73 x 10⁻⁴ M .
Given:
Number of moles = 2.50 molVolume of solution = 2.5 LAt equilibrium,
Concentration of NO = 0.28 MConcentration of Cl₂ = 0.14 MNow,
The concentration of NOCl will be:
= [tex]\frac{Number \ of \ moles}{Volume \ of \ solution}[/tex]
= [tex]\frac{2.5}{2.5}[/tex]
= [tex]1 \ M[/tex]
At equilibrium,
The concentration of NOCl will be:
= [tex]1-0.28[/tex]
= [tex]0.72 \ M[/tex]
hence,
The equilibrium constant,
→ [tex]K_c =\frac{ [NO]^2 [Cl_2]}{[NOCl]^2}[/tex]
By substituting the values, we get
[tex]= \frac{(0.28)^2\times (0.14)}{(0.72)^2}[/tex]
[tex]= 2.117\times 10^{-2}[/tex]
Thus the above answer is right.
Learn more about equilibrium below:
https://brainly.com/question/14954687
If you weighed out 203 mg of the green chloro complex and dissolved it in 24.14 mL of acidic solvent, the molarity of your stock solution would be 0.0295 M. Using your precise value of mass and volume that you entered above, please enter your calculated value for the concentration of the original green chloro complex stock solution in moles per liter.
Mgreen stock =
Answer:
0.00295M
Explanation:
Mass Concentration = mass/vol
= 0.203 g/ 0.02414 L = 8.409 g/L
But molarity = Mass conc / molar mass
∴ Molar mass(mol/L) = mass conc / molarity
= .84909 / 0.0295
= 285.06 g/mol
If 1 mol of green stock - 285.06g
? mol - 0.203 g
= 0.00071213 g
= 0.00071213 g / .2414L = 0.0095 mol/L.
13C NMR is a technique in which the total number of signals represents the number of unique carbon atoms in a molecule. Propose a structure that is consistent with the following data.
a. The IR includes peaks at 1603 and 1495 cm^-1
b. The 13c NMR has a total of 7 signals
c. The compound has one acidic proton.
Answer:
D. Poop Butt.
Explanation:
Based on the given data, we can propose a possible structure that fits the criteria: a. carbonyl group (C=O) and an aromatic ring b. there are seven unique carbon environments. c. Presence of a functional group like a carboxylic acid or phenol .
a. The IR peaks at 1603 [tex]cm^{-1}[/tex] and 1495[tex]cm^{-1}[/tex]suggest the presence of both a carbonyl group (C=O) and an aromatic ring.
b. The 13C NMR having a total of 7 signals indicates that there are seven unique carbon environments in the molecule.
c. Considering the presence of an acidic proton, it suggests the presence of a functional group like a carboxylic acid (COOH) or phenol ([tex]C_6H_5OH[/tex]).
Putting all this information together, a possible structure that fits the data could be benzoic acid ([tex]C_6H_5COOH[/tex]). It contains a benzene ring (giving 6 unique carbon environments), a carbonyl group (giving 1 unique carbon environment), and an acidic proton in the carboxylic acid group. This structure satisfies all the given data.
To know more about carboxylic acid, here
brainly.com/question/33933714
#SPJ2
give an example for photodecomposition reaction
A decomposition reaction occurs when one reactant breaks down into two or more products. This can be represented by the general equation: AB → A + B. Examples of decomposition reactions include the breakdown of hydrogen peroxide to water and oxygen, and the breakdown of water to hydrogen and oxygen.
A newly found element with the symbol J has two naturally occurring isotopes. Isotope one has an atomic mass of 139.905 amu and an abundance of 37.25%. Isotope two has an atomic mass of 141.709 amu and an abundance of 62.75%. Calculate the mass of the element.
Answer:
The mass of the element is 141.03701 amu
Explanation:
The catch here is that it notes a " newly found element. " Otherwise you could just refer to the average atomic mass of the element in the periodic table, and receive your solution in a much faster way.
The first isotope has an atomic mass of 139.905 amu, and a respective percent abundance of 37.25%. The second isotope has an atomic mass of 141.709 amu, and the remaining percent abundance, 100% - 37.25% = 62.75% ( given ). We can calculate the mass of the unknown element by associating each percentage with the mass of their respective isotope, over 100%.
Mass = ( ( 139.905 amu )( 37.25% ) + ( 141.709 amu )( 62.75% ) )/ 100,
Mass = ( ( 5211.46125 ) + ( 8892.23975 ) ) / 100,
Mass = ( 14103.701 ) / 100 = 141.03701 amu
When the optically active carboxylic acid below is decarboxylated using the conditions typical in the acetoacetate synthesis, will the ketone product also be optically active?
Answer:
ye, it will be optically active
Explanation:
a compound is said to be optically active if it can optically rotate.
the removal of carboxyl group and release of cabon dioxide from carboxylic acid in acetoacetate synthesis which will result in production of ketone as given the attachment below.
A buffer with a pH of 3.98 contains 0.23 M of sodium benzoate and 0.38 M of benzoic acid. What is the concentration of [H3O+] in the solution after the addition of 0.058 mol HCl to a final volume of 1.3 L? Assume that any contribution of HCl to the volume is negligible g
Answer:
New pH = 3.84
Explanation:
First of all we may think that if the buffer has pH 3.98 and we're adding H⁺, pH's buffer will be lower, as the [H⁺] is been increased.
Let's determine the moles of each compound:
0.23 M . 1.3L = 0.299 moles of NaBz
0.38 M . 1.3L = 0.494 moles of HBz
We add 0.058 of HCl, which is the same as 0.058 moles of H⁻
HCl → H⁺ + Cl⁻
As we add the moles of protons, these are going to react to the Bz⁻
In the buffer system we have these dissociations:
NaBz → Na⁺ + Bz⁻
HBz → H⁺ + Bz⁻
So, as we add protons, we have a new equilibrium:
Bz⁻ + H⁺ ⇄ HBz
In 0.299 0.058 0.494
Eq 0.241 - 0.552
Protons are substracted to benzoate, so the [HBz] is now higher than before. We calculate the new pH, with the Henderson Hasselbach equation
pH = pKa + log (Bz⁻/HBz)
pH = 4.20 + log (0.241 / 0.552) → 3.84
11. In TLC analysis of ferrocene and acetylferrocene (on silica TLC plate) which prediction is correct: A) ferrocene is more polar and moves higher up the plate (higher Rf value) B) Acetylferrocene is more polar and moves higher up the plate (higher Rf value) C) ferrocene is less polar and moves higher up the plate (higher Rf value) D) Acetylferrocene is less polar and moves higher up the plate (higher Rf value)
Answer:
Alternative C would be the correct choice.
Explanation:
The dual compounds were evaluated on something like a TLC plate through three separate additives in conducting a TLC study of ferrocene versus acetylferrocene.The polar as well as nonpolar ferrocene where nonpolar is about 0.63 with the maximum [tex]R_f[/tex] value, and indeed the polar is somewhere around 0.19 with [tex]R_f[/tex].TLC plate (30:1 toluene/ethanol) established with.The other three choices are not related to the given circumstances. So that option C would be the appropriate choice.
A soda manufacturing company is experimenting with changing the taste of its product as the concentration of carbon dioxide changes. To track their results, they must determine how concentration changes with pressure. The concentration of CO2 under a partial pressure of 0.719 atm is 429.7 ppm. At what pressure (in atm) would the CO2 need to be so that the concentration of CO2 is 235.3 ppm at the same temperature
Answer:
0.394 atm
Explanation:
Mathematically, when we increase the pressure of a gas, we are increasing its concentration and when we decrease the pressure, we are decreasing its concentration.l at same temperature
What this means is that pressure and concentration are directly proportional.
Representing concentration by c and pressure by p, we have;
P1/C1 = P2/C2
From the question;
P1 = 0.719 atm
P2 = ?
C1 = 429.7 ppm
C2 = 235.3 ppm
Now, we can rewrite the equation to be;
P1C2/C1 = P2
Substituting the values we have;
0.719 * 235.3/429.7 = 0.394 atm
A mixture of water and graphite is heated to 600 K in a 1 L container. When the system comes to equilibrium it contains 0.17 mol of H2, 0.17 mol of CO, 0.74 mol of H2O, and some graphite. Some O2 is added to the system and a spark is applied so that the H2 reacts completely with the O2.
Find the amount of CO in the flask when the system returns to equilibrium.
Express your answer to two significant figures and include the appropriate units.
Answer:
0.44 moles
Explanation:
Given that :
A mixture of water and graphite is heated to 600 K in a 1 L container. When the system comes to equilibrium it contains 0.17 mol of H2, 0.17 mol of CO, 0.74 mol of H2O, and some graphite.
The equilibrium constant [tex]K_c= \dfrac{[CO][H_2]}{[H_2O]}[/tex]
The equilibrium constant [tex]K_c= \dfrac{(0.17 )(0.17)}{0.74}[/tex]
The equilibrium constant [tex]K_c= 0.03905[/tex]
Some O2 is added to the system and a spark is applied so that the H2 reacts completely with the O2.
The equation for the reaction is :
[tex]H_2 + \dfrac{1}{2}O_2 \to H_2O \\ \\ 0.17 \ \ \ \ \ \ \ \ \ \to0.17[/tex]
Total mole of water now = 0.74+0.17
Total mole of water now = 0.91 moles
Again:
[tex]K_c= \dfrac{[CO][H_2]}{[H_2O]}[/tex]
[tex]0.03905 = \dfrac{[0.17+x][x]}{[0.91 -x]}[/tex]
0.03905(0.91 -x) = (0.17 +x)(x)
0.0355355 - 0.03905x = 0.17x + x²
0.0355355 +0.13095 x -x²
x² - 0.13095 x - 0.0355355 = 0
By using quadratic formula
x = 0.265 or x = -0.134
Going by the value with the positive integer; x = 0.265 moles
Total moles of CO in the flask when the system returns to equilibrium is :
= 0.17 + x
= 0.17 + 0.265
= 0.435 moles
=0.44 moles (to two significant figures)
What is/are the major organic product(s) of the following reaction, Question 2 options: A) CH3CH2CCH Br B) CH3CCCH3 Br C) CH2CH2 HCCH Br D) HCCCH2CH2Br E) HCCBr
Answer:
CH3CH2C≡CH
Explanation:
The particular reaction under study is known as the alkykation of acetylide ions. An acetylide ion can be alkykated using a suitable alkyl halide. The overall scheme of the reaction is;
CH≡C^- + RX -----> RC≡CH + X^-
This reaction is most effective when primary alkyl halides are used. It involves SN2 substitution of a halide in the alkyl halide by an acetylide ion. Secondary, tertiary or even bulky primary substrates are known to yield alkenes and alkynes owing to elimination by E2 mechanism.
Water (2190 g ) is heated until it just begins to boil. If the water absorbs 5.83×105 J of heat in the process, what was the initial temperature of the water?
Answer:
The initial temperature was [tex]36.4^\circ \:C[/tex]
Explanation:
[tex]\Delta t=\frac{q}{m\cdot C_s}=\frac{5.83\times10^5}{2190\times 4.184}\\\\=63.6^\circ\:C[/tex]
The temperature difference [tex]=100-63.6=36.4^\circ\:C[/tex]
Best Regards!
The idea that light can act as packets led to what new field of science?
A. Quantum mechanics
B. Nuclear mechanics
C. Electrical mechanics
D. Physical mechanics
What is the major organic product obtained from the following sequence of reactions? PhCH2CHO PhCH2CH2CHO PhCH2CH2COOH PhCH2COOH
Answer:
PhCH2CH2COOH
Explanation:
This is a reaction of PhCH2CH2Br with KCN in the presence of H3O^+. The reaction first leads to the formation of PhCH2CH2CN.
We must recall that part of the properties of nitriles is that they can be converted to carboxylic acids in the presence of H3O^+. This is a common synthetic route for carboxylic acids.
Therefore, when the PhCH2CH2CN is now further reacted with H3O^+, the carboxylic acid PhCH2CH2COOH is formed as the major organic product of the reaction, hence the answer given above.
Identify a process that is NOT reversible. A. melting of steel B. freezing water C. melting of ice D. frying an egg E. deposition of carbon dioxide (gas to solid)
A process that is not a reversible reaction is frying an egg.
What are reversible reactions?Reversible reactions are those reactions in which product will again change into the reactant.
Melting of steel and ice are reversible reaction as after cooling again we get the original state of steel and ice.Freezing of water is also reversible reaction as at normal temperature we get the original state of water.Deposition of carbon dioxide is also a reversible reaction.Frying an egg is a non reversible reaction as after frying an egg we didn't get the original egg again.Hence option (D) is correct.
To know more about reversible reaction, visit the below link:
https://brainly.com/question/1495850
A 1.0 kg object absorbs 1,303 J of heat energy and experiences a temperature increase of 5.2∘C. What is the object’s specific heat, in joules per gram-degree celsius? Report your answer with the correct number of significant figures.
Answer:
c = 250.58 J/kg/[tex]^{0}C[/tex]
Explanation:
The specific heat of a substance is the required quantity of heat to increase or decrease the temperature of its unit mas by 1 kelvin.
Q = mcΔθ
where: Q is the quantity of heat absorbed or released, m is the mass of the substance, c is its specific heat and Δθ is the change in temperature of the substance.
Given that; m = 1.0 kg, Q = 1303 J and Δθ = 5.2 [tex]^{0}C[/tex], then;
c = Q ÷ (mΔθ)
= 1303 ÷ (1.0 × 5.2)
= 1303 ÷ 5.2
= 250.58 J/kg/[tex]^{0}C[/tex]
The specific heat of the object is 250.58 J/kg/[tex]^{0}C[/tex].
Answer:
0.25
Explanation:
Mass of flask acid= 98.788
Mass of flask = 98.318
Mass of weak acid???
What is the mass of weak acid?
Answer:
0.460 g
Explanation:
Mass of flask + acid = 98.778 g
Mass of flask = 98.318 g
Mass of acid = 0.460 g
The pH of a solution prepared by mixing 40.00 mL of 0.10 M NH3 with 50.00 mL of 0.10 M NH4Cl and 30mL of 0.05 M H2SO4 is 5.17. Assume that the volume of the solutions are additive . What would be the Ka for NH4
Answer:
Following are the answer to this question:
Explanation:
The value of pH solution is =5.17 So, the p^{OH}:
[tex]p^{OH}[/tex]=14-56.17
=8.823
The volume of the [tex]NH_{3}[/tex] = 40.00 ml
convert into the liter= 0.040L
The value of the concentrated [tex]NH_{3}[/tex] =0.10 M
The volume of the [tex]NH_{4}Cl[/tex]= 50.00 ml
convert into the liter= 0.050L
The value of concentrated [tex]NH_{4}Cl[/tex]= 0.10 M
The volume of the [tex]H_{2}So_{4}[/tex]= 30 ml
convert into the liter= 0.030L
The value of concentrated [tex]H_2So_4[/tex]=0.05 M
Calculating total volume=(0.40+0.050+0.030)
=0.120 L
calculating the new concentrated value of [tex]NH_3[/tex] = [tex]\frac{0.10\times 0.040}{0.120}= 0.33 \ M[/tex]
calculating the new concentrated value of [tex]NH_4Cl[/tex]= [tex]\frac{0.050\times 0.10}{0.120}= 0.04166 \ M[/tex]calculating the new concentrated value of [tex]H_2So_4= \frac{0.030\times 0.05}{0.120}= 0.0125 \ M[/tex] when 1 mol [tex]H_2So_4[/tex] produced 2 mols [tex]H^{+}[/tex] so, 0.0125 in [tex]H_2So_4[/tex]produced:
[tex]=4 \times (2 \times 0.0125) \ mol H^{+}\\\\= 0.025 mol H^{+}[/tex]
create the ICE table:
[tex]NH_3 \ \ \ \ \ \ \ \ + H^{+} \ \ \ \ \ \ \longrightarrow NH_4^{+}[/tex]
I (m) 0.033(m) 0.025 0.04166
C -0.025 -0.025 + 0.025
E 8.3\times 10^{-3} 0 0.0667
now calculating pH:
when ph= 8.83:
[tex]P^{H}= p^{kb}|+ \log\frac{[NH_4^{+}]}{[NH_3]}\\\\8.83=p^{kb}+\log\frac{0.0667}{8.3 \times 10^{-3}}\\\\p^{kb}=8.83-0.9069\\\\ \ \ \ =7.7231 \\\\\ The P^{kb} \ for \ NH_3 \ is =7.7231\\\\\ The P^{kb} \ for N^{+}H_4=14-7.7231\\\\\ \ \ \ \ \ =6.2769[/tex]
Hydrazine, N2H4 , reacts with oxygen to form nitrogen gas and water. N2H4(aq)+O2(g)⟶N2(g)+2H2O(l) If 2.45 g of N2H4 reacts with excess oxygen and produces 0.450 L of N2 , at 295 K and 1.00 atm, what is the percent yield of the reaction?
Answer:
24.15%
Explanation:
According to the given situation the computation of the percent yield of the reaction is shown below:-
PV = NRT = N = [tex]\frac{PV}{RT}[/tex]
Mole of [tex]N_2[/tex] = [tex]\frac{PV}{RT}[/tex]
= [tex]\frac{1\times 0.450}{0.0821\times 295}[/tex]
= [tex]\frac{0.450}{24.2195}[/tex]
= 0.0186
Mole of [tex]N_2H_4 = \frac{2.45}{32}[/tex]
= 0.077
Now, the percentage of yield is
= [tex]\frac{Practical\ yield}{Theoretical\ yield}\times 100[/tex]
= [tex]\frac{0.0186}{0.077}\times 100[/tex]
= 24.15%
Therefore for computing the percentage of yield we simply divide the practical yield by theoretical yield and multiply with 100 so that we can get the result into the percentage form.
M(8,7) is the midpoint of rs. The coordinates of s are (9,5) what is the coordinates of r
Answer:
Coordinate or r = (7,9).
Explanation:
Data obtained from the question include the following:
Mid point = (8,7)
Coordinate of S = (9,5)
Coordinate of r =...?
We shall determine the coordinate of r as follow:
Let the coordinate of r be (x2, y2)
Mid point = (x1 + x2)/2 , (y1 + y2)/2
Mid point = (8,7)
Coordinate of S = (9,5)
x1 = 9
y1 = 5
x2 =?
y2 =?
The value of x2 can be obtained as follow:
8 = (x1 + x2)/2
8 = (9 + x2)/2
Cross multiply
9 + x2 = 2 × 8
9 + x2 = 16
Collect like terms
x2 = 16 – 9
x2 = 7
The value of y2 can be obtained as follow:
5 = (y1 + y2)/2
7 = (5 + y2)/2
Cross multiply
5 + y2 = 2 × 7
5 + y2 = 14
Collect like terms
y2 = 14 – 5
y2 = 9
Coordinate of r = (x2, y2)
Coordinate or r = (7,9)
At 25 °C, what is the hydroxide ion concentration, [OH−] , in an aqueous solution with a hydrogen ion concentration of [H+]=3.0×10−8 M?
Answer:
[tex][OH^-]=3.33x10^{-7}M[/tex]
Explanation:
Hello,
In this case, for the given concentration of hydronium, we can compute the pH as shown below:
[tex]pH=-log([H^+])=-log(3.0x10^{-8})=7.52[/tex]
Now, given the relationship between pH and pOH we can compute the pOH which is directly related with the concentration of hydroxyl in the solution:
[tex]pOH=14-pH=14-7.52=6.48[/tex]
Then, the concentration of hydroxyl turns out:
[tex][OH^-]=10^{-pOH}=10^{-6.48}[/tex]
[tex][OH^-]=3.33x10^{-7}M[/tex]
Best regards.
Hydrogen iodide decomposes according to the equation: 2HI(g) H 2(g) + I 2(g), K c = 0.0156 at 400ºC A 0.660 mol sample of HI was injected into a 2.00 L reaction vessel held at 400ºC. Calculate the concentration of HI at equilibrium.
Answer:
[HI] = 0.264M
Explanation:
Based on the equilibrium:
2HI(g) ⇄ H₂(g) + I₂(g)
It is possible to define Kc of the reaction as the ratio between concentration of products and reactants using coefficients of each compound, thus:
Kc = 0.0156 = [H₂] [I₂] / [HI]²
As initial concentration of HI is 0.660mol / 2.00L = 0.330M, the equlibrium concentrations will be:
[HI] = 0.330M - 2X
[H₂] = X
[I₂] = X
Where X is reaction coefficient.
Replacing in Kc:
0.0156 = [X] [X] / [0.330M - 2X]²
0.0156 = X² / [0.1089 - 1.32X + 4X² ]
0.00169884 - 0.020592 X + 0.0624 X² = X²
0.00169884 - 0.020592 X - 0.9376 X² = 0
Solving for X:
X = - 0.055 → False solution, there is no negative concentrations
X = 0.0330 → Right solution.
Replacing in HI formula:
[HI] = 0.330M - 2×0.033M
[HI] = 0.264M
Sulfur dioxide and oxygen react to form sulfur trioxide during one of the key steps in sulfuric acid synthesis. An industrial chemist studying this reaction fills a
75.0 L tank with 3.8 mol of sulfur dioxide gas and 7.0 mol of oxygen gas, and when the mixture has come to equilibrium measures the amount of sulfur trioxide
gas to be 1.5 mol
Calculate the concentration equilibrium constant for the reaction of sulfur dioxide and oxygen at the final temperature of the mixture. Round your answer to 2
significant digits.
Answer:
[tex]\large \boxed{5.1}[/tex]
Explanation:
1. Initial concentrations of reactants
[SO₂] = (3.8 mol)/(75 L) = 0.0507 mol·L⁻¹
[O₂] = (7.0 mol)/(75 L) = 0.0933 mol·L⁻¹
2. Equilibrium concentration of SO₃
[SO₃] = (1.5 mol)/(75 L) = 0.0200 mol·L⁻¹
3. Set up an ICE table
2SO₂ + O₂ ⇌ 2SO₃
I/mol·L⁻¹: 0.0507 0.0933 0
C/mol·L⁻¹: -2x -x +2x
E/mol·L⁻¹: 0.0507-2x 0.0933-x 2x
4. Calculate x
We know the final concentration of SO₃ is 0.0200 mol·L⁻¹, so
2x = 0.0200
x = 0.0100
5. Find the final concentrations of the reactants
Insert the numbers into the ICE table.
2SO₂ + O₂ ⇌ 2SO₃
I/mol·L⁻¹: 0.0507 0.0933 0
C/mol·L⁻¹: -0.0200 -0.0100 +0.0200
E/mol·L⁻¹: 0.0307 0.0833 0.0200
6. Calculate K
[tex]K_{\text{eq}} = \dfrac{\text{[SO$_{3}$]}^{2}}{\text{[SO}_{2}]^{2}\text{[O$_{2}$]}} = \dfrac{0.0200^{2}}{0.0307^{2}\times0.0833} =\mathbf{5.1}\\\\\text{The value of the equilibrium constant is $\large \boxed{\mathbf{5.1}}$}[/tex]
50.0 mL each of 1.0 M HCl and 1.0 M NaOH, at room temperature (20.0 OC) are mixed. The temperature of the resulting NaCl solution increases to 27.5 OC. The density of the resulting NaCl solution is 1.02 g/mL. The specific heat of the resulting NaCl solution is 4.06 J/g OC Calculate the Heat of Neutralization of HCl(aq) and NaOH(aq) in KJ/mol NaCl produced
Answer:
-62.12kJ/mol is heat of neutralization
Explanation:
The neutralization reaction of HCl and NaOH is:
HCl + NaOH → NaCl + H₂O + HEAT
An acid that reacts with a base producing a salt and water
You can find the released heat of the reaction -heat of neutralization- (Released heat per mole of reaction) using the formula:
Q = C×m×ΔT
Where Q is heat, C specific heat of the solution (4.06J/gºC), m its mass of the solution and ΔT change in temperature (27.5ºC-20.0ºC = 7.5ºC).
The mass of the solution can be found with the volume of the solution (50.0mL of HCl solution + 50.0mL of NaOH solution = 100.0mL) and its density (1.02g/mL), as follows:
100.0mL × (1.02g / mL) = 102g of solution.
Replacing, heat produced in the reaction was:
Q = C×m×ΔT
Q = 4.06J/gºC×102g×7.5ºC
Q = 3106J = 3.106kJ of heat are released.
There are 50.0mL ×1M = 50.0mmoles = 0.0500 moles of HCl and NaOH that reacts releasing 3.106kJ of heat. That means heat of neutralization is:
3.106kJ / 0.0500mol of reaction =
-62.12kJ/mol is heat of neutralizationThe - is because heat is released, absorbed heat has a + sign
hen adding a solute to water, the vapor pressure will __________ and the boiling point will __________.
Answer: When a solute is added to water, the vapor pressure will decrease and the boiling point will increase.
Explanation:
When a solute is added to water, a solvent's vapor pressure will decrease because of the displacement of solvent molecules by the solute. i.e. some of the solvent molecules at the surface of the water are replaced by the solute.When a solute is added to water, a solvent's boiling point will increase because water molecules need more energy to produce required pressure to escape the boundary of the liquid , so as the number of particles increase in the liquid it increase the boiling point.Calculate Delta G for each reaction using Delta Gf values: answer kJ ...thank you
a) H2(g)+I2(s)--->2HI(g)
b) MnO2(s)+2CO(g)--->Mn(s)+2CO2(g)
c) NH4Cl(s)--->NH3(g)+HCl(g)
Answer:
a) [tex]\Delta G=2.6kJ[/tex]
b) [tex]\Delta G=-979.57kJ[/tex]
c) [tex]\Delta G=264.21kJ[/tex]
Explanation:
Hello,
In this case, in each reaction we must subtract the Gibbs free energy of formation the reactants to the Gibbs free energy of formation of the products considering each species stoichiometric coefficients. In such a way, the Gibbs free energy of formations are:
[tex]\Delta _fG_{H_2}=\Delta _fG_{I_2}=0kJ/mol\\\Delta _fG_{HI}=1.3kJ/mol\\\Delta _fG_{CO_2}=-394.4kJ/mol\\\Delta _fG_{CO}=-137.3 kJ/mol\\\Delta _fG_{NH_3}=16.7 kJ/mol\\\Delta _fG_{HCl}=-95.3kJ/mol\\\Delta _fG_{MnO_2}=465.37kJ/mol\\\Delta _fG_{Mn}=0kJ/mol\\\Delta _fG_{NH_4Cl}=-342.81kJ/mol[/tex]
So we proceed as follows:
a)
[tex]\Delta G=2\Delta _fG_{HI}-\Delta _fG_{H_2}-\Delta _fG_{I_2}\\\\\Delta G=2*1.3\\\\\Delta G=2.6kJ[/tex]
b)
[tex]\Delta G=\Delta _fG_{Mn}+2*\Delta _fG_{CO_2}-\Delta _fG_{MnO_2}-2*\Delta _fG_{CO}\\\\\Delta G=0+2*-394.4-465.37-2*-137.3\\\\\Delta G=-979.57kJ[/tex]
c)
[tex]\Delta G=\Delta _fG_{NH_3}+\Delta _fG_{HCl}-\Delta _fG_{NH_4Cl}\\\\\Delta G=16.7-95.3-(-342.81)\\\\\Delta G=264.21kJ[/tex]
Regards.
Liquids A, B, and C are insoluble in one another (i.e., they are immiscible). A, B, and C have densities of 0.780 g/cm3, 1.102 g/cm3 , and 1.040 g/cm3, respectively. Which drawing represents the result of placing all three liquids into the same graduated cylinder?
Answer:
The drawing that represents the result of placing all three liquids into the same graduated cylinder will have the liquid arranged one on top of the other from top to bottom in the order of A, C, B.
Explanation:
The image with the options is not provided in this question, but I can answer this fairly so that you can pick from the question, the correct drawing.
We know that two or more immiscible liquids contained together in a container will always separate in the order of their density from top to bottom, with the densest at the bottom, and the least densest at the top. In this case, liquid A is the least densest, and liquid B is the densest. Liquid A will stay on top, and liquid B will be at the bottom. Liquid C will be in between liquid A and liquid B.
When the following molecular equation is balanced using the smallest possible integer coefficients, the values of these coefficients are:
P2O5 (s) + H2O (l) =H3PO4 (aq)
The balanced chemical equation for the reaction between hydrogen sulfide and oxygen is:
2H2S(g) + 3O2(g) =2H2O(l) + 2SO2(g)
We can interpret this to mean:
3moles of oxygen and_______moles of hydrogen sulfide react to produce______moles of water and_______ moles of sulfur dioxide.
Answer:
1. The coefficients are: 1, 3, 2
2. From the balanced equation, we obtained the following:
3 moles oxygen, O2 reacted.
2 moles of Hydrogen sulfide, H2S reacted.
2 moles of water were produced.
2 moles of sulphur dioxide, SO2 were produced.
Explanation:
1. Determination of the coefficients of the equation.
This is illustrated below:
P2O5(s) + H2O(l) <==> H3PO4(aq)
There are 2 atoms of P on the left side and 1 atom on the right side. It can be balance by putting 2 in front of H3PO4 as shown below:
P2O5(s) + H2O(l) <==> 2H3PO4(aq)
There are 2 atoms of H on the left side and 6 atoms on the right side. It can be balance by putting 3 in front of H2O as shown below:
P2O5(s) + 3H2O(l) <==> 2H3PO4(aq)
Now the equation is balanced.
The coefficients are: 1, 3, 2.
2. We'll begin by writing the balanced equation for the reaction. This is given below:
2H2S(g) + 3O2(g) => 2H2O(l) + 2SO2(g)
From the balanced equation above,
3 moles of oxygen, O2 reacted with 2 moles of Hydrogen sulfide, H2S to produce 2 moles of water, H2O and 2 moles of sulphur dioxide, SO2.
g Calculate the concentration of sulfate ion when BaSO4 just begins to precipitate from a solution that is 0.0758 M in Ba2+.
Answer:
1.42 × 10⁻⁹ M
Explanation:
Step 1: Given data
Concentration of Ba²⁺ ([Ba²⁺]): 0.0758 MSolubility product constant of BaSO₄ at 25°C: 1.08 × 10⁻¹⁰Step 2: Write the reaction for the solution of BaSO₄
BaSO₄(s) ⇄ Ba²⁺(aq) + SO₄²⁻(aq)
Step 3: Calculate the concentration of SO₄²⁻
We will use the following expression.
Ksp = 1.08 × 10⁻¹⁰ = [Ba²⁺] × [SO₄²⁻]
[SO₄²⁻] = 1.08 × 10⁻¹⁰ / [Ba²⁺] = 1.08 × 10⁻¹⁰ / 0.0758 = 1.42 × 10⁻⁹ M