1. Explain how you could use multiple categories of animation on a single slide to help convey a
particular idea or concept. Your proposed slide should include at least two animations from the
entrance, emphasis, and exit animation groups.


2. What is the difference between duration for a transition and duration for an animation?


3. What would happen if a user created two animations set to run simultaneously but set the
animations with two different durations? How could manipulating the durations separately be
useful for certain animation tasks (think of the Principles of Animation)?

A structured program includes only combinations of the three basic structures Sequence, selection, and loop. The correct option is B.

These three structures provide the fundamental building blocks for creating structured programs. They allow for clear and organized flow of instructions, decision-making based on conditions, and efficient repetition of code when needed.

By combining these structures in various ways, programmers can create complex and powerful algorithms to solve different problems. The structured programming approach promotes code readability, maintainability, and modular design. The correct option is B.

Learn more about structured program visit:

https://brainly.com/question/12996476

#SPJ11

Mariella can help her sister understand the concept of a variable by equating it to a box that contains mail.

The same way a box can carry distinct mail types and permit amendments to their content, variables are also capable of accommodating diverse data types while permitting modification amidst program execution.

Option A (a car dependent on gas) could suffice in explaining dependencies or requirements; however, it fails when attempting to clarify the variable concept.

Option B (a boy walking his dog) does not relate to the variable definition.

Finally, Option D (an overripe banana) may be used to illustrate state and conditions but falls short when applied out of context as an explanation of the variable concept.

Read more about programs here:

https://brainly.com/question/1538272

#SPJ1

Using a high-level programming language instead of a lower-level language has its own advantages and disadvantages. One of the advantages of high-level programming languages is that they are more user-friendly and easier to learn compared to low-level languages.

1)High-level languages allow programmers to write code using English-like words and phrases which make it easier to read, write and understand. Additionally, high-level languages have built-in library and functions that simplify the coding process and make it faster to develop software applications.

2)However, some algorithms can only be expressed in low-level languages and cannot be expressed in any high-level languages. This is because low-level languages provide direct access to the computer's hardware and operating system, allowing programmers to write code that is closer to the machine language. Low-level languages are also more efficient when it comes to memory usage and speed.

3)It's important to note that code in a high-level language is often translated into code in a lower-level language to be executed on a computer. This process is called compilation or interpretation. During compilation, the high-level language code is converted into machine language that can be executed by the computer. Interpreted languages, on the other hand, execute the high-level language code directly without the need for compilation.

In conclusion, both high-level and low-level programming languages have their own advantages and disadvantages. It's important to choose the language that best fits the requirements of the project and the skills of the programmer.

For such more question on library

https://brainly.com/question/31392496

#SPJ11

When deciding whether to agree or disagree with a statement, it's essential to consider the facts, context, and potential consequences.

Thoroughly examining the statement and gathering relevant information can help you make a well-informed decision. It's also crucial to reflect on your values and beliefs to ensure that your opinion is consistent with your principles.

If you find it challenging to decide, seeking others' perspectives or engaging in a healthy debate can provide clarity. It's important to remember that having a clear stance on a statement may not always be possible, as some situations may require a more nuanced approach.

Ultimately, being open-minded and willing to reconsider your position when presented with new evidence is key to making well-rounded decisions.

Learn more about decision at

https://brainly.com/question/3122212

#SPJ11

The tool used to create user and computer accounts, set their security policies, and apply group policies is Active Directory.

Active Directory is a Microsoft technology that serves as a centralized management solution for network resources. It allows administrators to create user and computer accounts, set security policies such as password requirements and access permissions, and apply group policies for various user groups. Group policies help enforce consistent configurations, security settings, and policies across users and computers within an organization. This centralization makes managing and maintaining a secure network environment more efficient and streamlined.

Active Directory is the key tool for managing user and computer accounts, setting security policies, and applying group policies in a network environment.

To know more about Active Directory visit:

https://brainly.com/question/31766282

#SPJ11

The Internet of Things (IoT) refers to the network of physical devices, vehicles, home appliances, and other items that are connected to the Internet and can collect and exchange data. One example of an IoT device is the smart thermostat, which allows users to remotely control their home's heating and cooling systems using a mobile app or web interface.

Smart thermostats work by connecting to a home's Wi-Fi network and using sensors to collect data on temperature, humidity, and other environmental factors. This data is then analyzed by the thermostat's software, which uses algorithms to adjust the heating and cooling systems based on user preferences and energy-saving settings.

In addition to remote control and automation, smart thermostats can also provide users with insights and analytics on their energy usage, helping them to identify areas where they can reduce waste and save money on their utility bills. Some smart thermostats also offer integration with other smart home devices, such as voice assistants, smart lighting, and security systems, allowing for seamless automation and control of all connected devices.

To learn more about the Internet of Things, visit:

https://brainly.com/question/19995128

#SPJ11

In the given sentences, it is mentioned that the feedback from a 'heavy user' of the product will likely carry more weight in making design decisions compared to a 'light user'. However, if the majority of the customer base consists of 'light users', their feedback should also be given more weight to ensure that their needs and preferences are taken into account when making design decisions.

The completed sentences are: "It is important to prioritize feedback. Comments from a 'heavy user' of your product will likely carry more weight in making design decisions, than one who is a 'light' user. On the other hand, if your customer base is mostly made up of 'light' users, then their feedback might need to carry more weight." The correct words to complete the sentences are 1. more and 2. more.

To know more about design visit:

https://brainly.com/question/14035075

#SPJ11

A Circle Pyramid 2.0 program would likely involve using loops and conditional statements to draw a pyramid of circles that gradually decrease in size as they move up the pyramid.

The program may also involve user input for the number of rows in the pyramid and the size of the circles.

To complete this program successfully, it is essential to have a strong understanding of loops and conditional statements in your programming language.

Additionally, understanding how to use mathematical calculations to determine the size and position of each circle is crucial.

Overall, a Circle Pyramid 2.0 program would be an excellent opportunity to develop your programming skills and enhance your problem-solving abilities.

For more questions like Opportunity click the link below:

https://brainly.com/question/29341508

#SPJ11

For game a, a winning strategy for the first player is to always name a date that is an odd number. This is because they can always force the second player to name an even number, which means they cannot reach 31st December without skipping a day.

However, if the second player makes a mistake and names an odd number, the first player can simply name the next even number and continue their winning strategy. This strategy does not depend on whether the year is a leap year or not.

For game b, a winning strategy for the first player is to always name the first day of the month. This is because they can always force the second player to name the next day, which means they can skip a day if necessary to reach 31st December. If the second player makes a mistake and names the first day of the next month, the first player can simply name the first day of that month and continue their winning strategy.

This strategy also does not depend on whether the year is a leap year or not. However, this game may be harder to win as it requires the first player to keep track of which days have already been named and which days are still available to name.

You can learn more about winning strategy at: brainly.com/question/3222488

#SPJ11

An error will be returned.

The recursive function in Python that computes the sum of the digits of a positive integer is

digit_sum(n):

if n < 10:

return n

else:

last_digit = n % 10

remaining_digits = n // 10

return last_digit + digit_sum(remaining_digits)

First, it checks if the input number `n` is less than 10. If it is, then the function returns the number itself, as the sum of the digits of a one-digit number is the number itself.

If `n` has more than one digit, the function uses the modulus operator `%` to get the last digit of `n`, and the integer division operator `//` to get the remaining digits.

The function then recursively calls itself on the remaining digits and adds the last digit to the sum. This process continues until `n` has been reduced to a single digit, at which point the function returns the sum of all the digits.

For example, usage of the function:

>>> digit_sum(12345)

15

learn more about sum digit: https://brainly.com/question/29573634

#SPJ4

To address the employees of a hospital about the new, extensive building security access system, you would use an opening that highlights the importance of security and access control in the hospital setting.

"Dear hospital employees, we are excited to introduce our new, extensive building security access system, designed to enhance the safety and security of our staff, patients, and visitors. This state-of-the-art system will streamline entry and exit points while ensuring that only authorized personnel have access to restricted areas. We believe that this advanced security measure will greatly improve our hospital's overall safety and contribute to a better working environment for all."

Learn more about security visit:

https://brainly.com/question/32546129

#SPJ11

The static method dayOfWeek(month, day, year) returns an integer value representing the day of the week for the given date, where 0 denotes Sunday and 6 denotes Saturday.

To calculate the day of the week for a given date, we can use the Zeller's congruence algorithm. The algorithm takes the input date (month, day, year) and uses the following formula:

h = (q + ((13*(m+1))/5) + K + (K/4) + (J/4) - (2*J)) % 7

Where h is the day of the week (0 denotes Saturday, 1 denotes Sunday, and so on), q is the day of the month, m is the month (3 = March, 4 = April, ..., 12 = December, 1 = January, 2 = February), K is the year of the century (year mod 100), and J is the zero-based century (year / 100).

Using this formula, we can calculate the day of the week for any given date. The static method dayOfWeek(month, day, year) can implement this algorithm and return the corresponding integer value representing the day of the week.

For more questions like Static method click the link below:

https://brainly.com/question/15228459

#SPJ11

Explanation:

yes, because the can't stolen the computer and hardware

To print all positive divisors of a given natural number X in ascending order, you can follow the code written in Python language.

Code implementation:

1. Start by initializing a variable 'divisor' to 1.
2. Then, using a loop, check if 'divisor' divides 'X' completely (i.e., the remainder is 0). If it does, print 'divisor'.
3. Increment 'divisor' by 1 and repeat step 2 until 'divisor' becomes greater than 'X'.
4. By the end of the loop, you would have printed all the positive divisors of 'X' in ascending order.

Here is the code that you can use:

```
X = int(input("Enter a natural number: "))
divisor = 1

while divisor <= X:
   if X % divisor == 0:
       print(divisor)
   divisor += 1
```

For example, if the input is X = 10, the output would be:
```
1
2
5
10
```

To know more about Python visit:

https://brainly.com/question/31055701

#SPJ11

An open-source tool for model deployment is Apache PredictionIO. It offers an API for a machine learning server that can be used to deploy, oversee, and administer prediction models in real-world settings.

Choose the model you want to use from the model registry, then click Deploy and then choose Deploy to a Web Service. You must submit the scoring script we built along with the YAML file containing the package requirements after choosing the "Deploy to a web service" option.

Flask is a strong choice for creating RESTful APIs since it is lightweight, simple to use, well-documented, and well-liked.

To know more about API visit:

https://brainly.com/question/30812361

#SPJ1

Answer:

yes

Explanation:

To fix the "key is invalid. you must supply a key in OpenSSH public key format" error, you need to convert your existing key to the required OpenSSH format.

Here's a brief guide to help you resolve this issue:

1. Identify the current key format: Your key could be in formats like PEM or PKCS#8. Check the file to determine its format.

2. Convert the key to OpenSSH format: You can use the 'ssh-keygen' tool to convert the key. For example, if you have a PEM key, run the following command:
  ```
  ssh-keygen -p -m PEM -f /.ssh/key_filename
  ```
  Replace 'key_filename' with the actual name of your key file.

3. Update the public key: Once you've converted the private key, you also need to update the corresponding public key. Run this command to generate the OpenSSH public key:
  ```
  ssh-keygen -y -f /.ssh/key_filename > /.ssh/key_filename.pub
  ```
By following these steps, you should now have a properly formatted OpenSSH key that resolves the error message. Remember to replace the paths and filenames with your own.

You can learn more about public key at: brainly.com/question/29999097

#SPJ11

Below is an example of the way to define an object named "window" of type Window that has a width of 80 and a height of 20:

In the given code , we define a class named "Window" with an initializer design that takes two arguments: "breadth" and "height". The initializer assigns these debates to instance variables accompanying the same names.

Then, we need to establish an instance of the Window class and assign it to the changing "window". We appear the values 80 and 20 as debates to the initializer to specify the breadth and height, individually. The resulting "bow" object will have a breadth of 80 and a height of 20.

Learn more about Objects from

https://brainly.com/question/27210407

#SPJ4

This following function works the same way as the previous one, but it uses list comprehension to create the two-dimensional array in a more concise way.

Here is a Python function that takes in the number of rows, number of columns, and a string and returns a two-dimensional array of the dimensions specified with each element being the given string:

```python
def fill_str(rows, cols, string):
   # Create an empty list to hold the two-dimensional array
   arr = []
   # Loop through the number of rows
   for i in range(rows):
       # Create an empty list to hold the current row
       row = []
       # Loop through the number of columns
       for j in range(cols):
           # Append the given string to the current row
           row.append(string)
       # Append the current row to the two-dimensional array
       arr.append(row)
   # Return the two-dimensional array
   return arr
```

You can then call this function with the example inputs you provided like this:

```python
mat = fill_str(4, 2, "20")
print(mat)
```

This should output the following:

```
[['20', '20'], ['20', '20'], ['20', '20'], ['20', '20']]
```

Know more about the Python click here:

https://brainly.com/question/31055701

#SPJ11

On average, it would take an attacker approximately 5,833 hours to guess an 8-character password using the entire ASCII character set at a rate of one attempt per nanosecond. This estimate highlights the importance of using a large character set and sufficient password length for improved security.

Given that there are 128 characters in the ASCII character set and you need to create an 8-character password, you can calculate the total number of possible passwords using the formula n × k, where n is the number of available characters and k is the length of the password. In this case, you have 128⁸ possible passwords (approximately 2.1 x 10¹⁶).

Assuming an attacker can test a password every nanosecond (1 x 10⁷ seconds), you can calculate the average time to guess the password by dividing the number of possible passwords by the testing rate. That is: (2.1 x 10¹⁶ passwords) / (1 x 10⁹ passwords/sec) = 2.1 x 10⁷ seconds. To make it easier to comprehend, you can convert this value into hours by dividing by 3,600 (seconds in an hour): 2.1 x 10⁷ seconds / 3,600 seconds/hour ≈ 5,833 hours.

You can learn more about ASCII characters at: brainly.com/question/30465785

#SPJ11

"Empower Minds, Harness Technology, Shape the Future: Media, Information, and Technology Literacy Unleashed." Media, information, and technology literacy involves the ability to critically understand, evaluate, and utilize various forms of media, information sources, and digital technology.

This slogan emphasizes the importance of empowering our minds by developing the necessary skills to navigate and make sense of the vast amount of information we encounter daily. By harnessing technology, we can effectively filter, analyze, and apply this knowledge to better our lives and society.

The slogan also encourages us to shape the future by promoting responsible media consumption and production. Instead of simply imitating what we see, we can use our media literacy skills to create original, meaningful content that reflects our values and fosters positive change. As we become proficient in using technology and understanding information, we can use these tools to advance our education, careers, and personal growth.

Overall, this slogan highlights the importance of media, information, and technology literacy in today's fast-paced digital world. By cultivating these skills, we can unlock our potential and contribute to a brighter, more informed, and creative future for all.

You can learn more about Media at: brainly.com/question/19587323

#SPJ11

a) The JavaScript code sums the odd integers between 1 and 99 using a for loop and outputs the result. b) The JavaScript code calculates and outputs the value of 2.5 raised to the power of 3 using the Math.pow method. c) The JavaScript code outputs the integers from 1 to 20 by using a while loop and the counter variable x, printing only five integers per line. d) The JavaScript code outputs the integers from 1 to 20 by using a for loop, printing only five integers per line and using an if statement to print a new line after every fifth integer.

a)

```javascript
var sum = 0;
var count = 0;
for (var i = 1; i <= 99; i += 2) {
 sum += i;
 count++;
}
console.log("Sum of odd integers between 1 and 99: " + sum);
```

This will output the sum of odd integers between 1 and 99.

b)

```javascript
var result = Math.pow(2.5, 3);
console.log("Result of 2.5 raised to the power of 3: " + result);
```

This will output the result of 2.5 raised to the power of 3, which is 15.625.

c)

```javascript
var x = 1;
var counter = 0;
while (x <= 20) {
 console.log(x);
 x++;
 counter++;
 if (counter === 5) {
   console.log("");
   counter = 0;
 }
}
```

This will output the integers from 1 to 20 by using a while loop and the counter variable x, printing only five integers per line.

d)

```javascript
var counter = 0;
for (var x = 1; x <= 20; x++) {
 console.log(x);
 counter++;
 if (counter === 5) {
   console.log("");
   counter = 0;
 }
}
```

This will output the integers from 1 to 20 by using a for loop, printing only five integers per line. The if statement is used to print a new line after every fifth integer.

Know more about the loop click here:

https://brainly.com/question/30494342

#SPJ11

Answer:

section .data

   name db 'Genius'

   id db '456', 0

section .text

   global _start

_start:

   ; Print the first name

   mov eax, 4      ; System call for "write"

   mov ebx, 1      ; File descriptor for stdout

   mov ecx, name   ; Address of the string to print

   mov edx, 6      ; Length of the string

   int 0x80        ; Call the kernel to print the string

   ; Print the last 3 digits of the student ID

   mov eax, 4      ; System call for "write"

   mov ebx, 1      ; File descriptor for stdout

   mov ecx, id     ; Address of the string to print

   mov edx, 3      ; Length of the string

   int 0x80        ; Call the kernel to print the string

   ; Exit the program

   mov eax, 1      ; System call for "exit"

   xor ebx, ebx    ; Return code of 0

   int 0x80        ; Call the kernel to exit

Explanation:

In this program, we define two data sections: one for the first name and one for the last three digits of the student ID. The db directive is used to define a string of characters, with a null terminator (0) at the end.

In the text section, we define the _start label, which is the entry point of the program. We use the mov instruction to set up the parameters of the write system call, which is used to print the strings to the output screen. The int 0x80 instruction is used to call the kernel to perform the system call.

Finally, we use another system call to exit the program with a return code of 0.

Note that the program assumes that the first name and the last three digits of the student ID are known at compile time and are stored in the name and id variables, respectively. If you need to prompt the user for input, you will need to use additional system calls to read from the standard input.

To write an assembly language program to print your first name followed by the last three digits of your student ID, you will need to use the appropriate system calls to access the input and output streams.

First, you will need to declare a buffer in the data section of the program to store your name and student ID. Then, you will use a loop to read each character of your name and student ID into the buffer. Once the buffer is populated, you will use another loop to print each character of the buffer to the output screen.

You will need to use string manipulation techniques to extract the last three digits of your student ID from the buffer and append them to your name before printing to the output screen. Finally, you will terminate the program with an appropriate system call.

It is important to pay attention to the syntax and formatting requirements of the assembly language being used and to thoroughly test the program to ensure proper functionality.

You can learn more about the program at: brainly.com/question/14368396

#SPJ11

We can deduce here that it is crucial to take into account the data demands of each component when constructing a bus or buses to satisfy the needs of internal, external, and user communication in a computer system. This will help to ensure that the buses can manage the necessary quantity of data transfer.

A computer system is made up of a mix of software and hardware parts that cooperate to carry out various computing activities.

The central processing unit (CPU), memory, storage devices, input/output devices (such as the keyboard, mouse, and monitor), and other peripherals are examples of physical elements that make up a computer system's hardware components.

The operating system (OS), application software, and system utilities are among the software components that allow the computer to carry out particular activities.

Learn more about computer system on https://brainly.com/question/21474169

#SPJ1

These three Windows features - "boot in safe mode," "boot from disk," and the easy-to-access startup utility - can enhance cybersecurity for Windows users

The "boot in safe mode" feature in Windows is designed to start the operating system with only the most essential drivers and services, which can help prevent malware and other types of malicious software from running. This limited user mode also restricts the actions that users can perform on the system, making it more difficult for attackers to gain unauthorized access or perform unwanted actions.

The "boot from disk" feature allows users to start their computer from a bootable CD or USB drive, which can be helpful for troubleshooting and repairing system issues. This can also be used to run antivirus software or other security tools that can help detect and remove malware from the system.

The third startup utility, which allows users to control which applications are started automatically when the OS is reset, can help improve cybersecurity by allowing users to disable unnecessary or potentially dangerous programs from running at startup. This can help reduce the attack surface of the system and prevent malware from running automatically.

Overall, these features can help enhance the cybersecurity of Windows users by providing additional layers of protection and control over the system. However, it's important to note that no security feature is foolproof, and users should also practice good security hygiene, such as keeping their operating system and software up to date and using strong passwords.

Know more about the Windows features click here:

https://brainly.com/question/29509027

#SPJ11

To create a form with the Form button in Microsoft Access, you should select the table from which to create the form, click the blank tab, navigate to the blank group, and click the Form button. Microsoft Access will then create a form using blank fields and default settings, which can be customized and adjusted as needed.

To create a form with the Form button in Microsoft Access, you can follow these steps:

In the form design view, you can customize the layout and design of the form by adding or removing fields, adjusting their size and position, and applying formatting and styles. You can also add labels, buttons, and other controls to enhance the functionality of the form. Once you have finished designing the form, you can save it and use it to view, edit, or add records to the underlying table or query. Creating a form with the Form button is a quick and easy way to generate a basic form in Microsoft Access, which can then be customized and refined to meet your specific needs.

To learn more about Microsoft Access, visit:

https://brainly.com/question/28255556

#SPJ11

Based on the code structure, the array has 2 rows.

The given code creates a 2-dimensional list named "grid" that contains two rows with each with three elements. That means the given code initializes an empty list called "grid" and appends two lists to it.

Each appended list contains three strings. Therefore, the resulting "grid" list has two rows and three columns.

The print statement outputs the entire 2D array. The output will look like:

[["frog", "cat", "hedgehog"], ["fish", "emu", "rooster"]]

Read more about Code row

brainly.com/question/31657225

#SPJ1

The array 'grid' has 2 rows.

How does append?

1. The code starts with an empty list 'grid'.
2. The 'append' function is used to add a new list (row) containing "frog", "cat", and "hedgehog".
3. Another 'append' function is used to add another list (row) containing "fish", "emu", and "rooster".
4. The 'print' function displays the contents of the 'grid'.

As a result, the 'grid' contains 2 rows.

The entire 2D array is as follows.

Output:

[["frog", "cat", "hedgehog"], ["fish", "emu", "rooster"]]

To know more about append visit:

https://brainly.com/question/30752733

#SPJ11

The equivalence classes for testing the software program are: valid ecs for size representing valid values (twin, full, queen, king), valid ecs for distance representing valid values (1-15, 16-40, 41-80), invalid ecs representing invalid values (na), and boundary values (1, 15, 16, 40, u, 80).

A set of test cases for the software program would include: a valid test case with a twin size and distance of 1, a valid test case with a queen size and distance of 16, a boundary test case with full size and distance of 15, an invalid test case with a size of "na" and distance of 25, and a boundary test case with a king size and distance of 80.

These test cases cover all of the equivalence classes and boundary values for testing the software program.

In summary, the equivalence classes and boundary values for testing the software program have been determined, and a set of test cases has been designed to adequately test the program.

For more questions like Software click the link below:

https://brainly.com/question/985406

#SPJ11

To maintain database security and prevent unauthorized access to sensitive information, we can use an inference detection algorithm. This algorithm monitors queries and user activity to detect any attempts to infer sensitive information from available data.

1. To maintain database security and protect the sensitive association between names and salaries, you can construct your database using two separate tables. The first table, called 'Employee_Info', will store general information about employees, such as their names and addresses. The second table, named 'Salary_Info', will store salary data. Both tables will have a unique Employee_ID as the primary key to link the records without directly associating names and salaries.
Database schema:
Employee_Info
- Employee_ID (Primary Key)
- Name
- Address

Salary_Info
- Employee_ID (Primary Key)
- Salary

2. To add the new attribute 'employee start date' without compromising the relationship between employee and salary, you can include this attribute in the 'Employee_Info' table, since it is not sensitive information. The updated schema would be as follows:
Updated Database schema:
Employee_Info
- Employee_ID (Primary Key)
- Name
- Address
- Start_Date

Salary_Info
- Employee_ID (Primary Key)
- Salary

Learn more about database; https://brainly.com/question/24027204

#SPJ11

Byte should immediately disconnect his computer from the internet and not pay the ransom. He should then consult an IT professional for assistance.

Explanation:
1. Disconnect from the internet: This helps prevent further damage or spread of the ransomware to other devices on the network.
2. Do not pay the ransom: Paying the ransom doesn't guarantee the restoration of files and may encourage more cyberattacks in the future.
3. Consult an IT professional: Seek help from a trusted IT expert to assess the extent of the damage and determine the best course of action.
4. Scan for malware: Use a reputable antivirus software to scan and remove any existing malware or ransomware from the computer.
5. Restore files from backup: If Byte has backups of his files, he can restore them once the malware has been removed. If not, it's important to create backups in the future.
6. Update software: Ensure all software, including the operating system and antivirus, are up-to-date to protect against known vulnerabilities.
7. Strengthen security: Byte should use strong, unique passwords for all accounts and enable two-factor authentication when available.
8. Educate on cyber threats: Learning about common cyber threats, like phishing emails and malicious attachments, can help Byte avoid falling victim to future ransomware attacks.

Therefore, byte should not make any payment or engage with the ransomware message first. His first step should be to disconnect his computer from the internet and any other network immediately.

Know more about the ransomware click here:

https://brainly.com/question/30166670

#SPJ11