Answer:
Número de moles de cloro en número de moles de NaCl
Explanation:
espero que si sea la correcta
Covert 645g of CuCl2 to mole
Answer:
kombinasi kuda-kuda belakang
Explanation:
maaf kalau salahnya
The flask contains 25 mL of an unknown diprotic acid aqueous solution that reacts in a 1:2 stochiometric ratio with NaOH. Titrate the solution with NaOH to determine the concentration of the acid. Perform a titration by setting the concentration of the NaOH solution and adding it to the acid solution using the different Add Base buttons. The equilvalence point of the titration is passed when the indicator color changes. The unknown sample can be titrated multiple times by pressing the Retitrate button and starting over. Enter the concentration of the unknown acid solution.
To obtain accurate results, follow the following procedure:
switch the indicator to phenolphthalein titrate 1 mL at a time until solution turns pink, make note of volume added retitrate add 1 mL at a time until 1 mL less than the first titration add 0.05 mL at a time until the solution just turns pink
Answer:
The flask contains 25 mL of an unknown diprotic acid aqueous solution that reacts in a 1:2 stochiometric ratio with NaOH. Titrate the solution with NaOH to determine the concentration of the acid. Perform a titration by setting the concentration of the NaOH solution and adding it to the acid solution using the different Add Base buttons. The equilvalence point of the titration is passed when the indicator color changes. The unknown sample can be titrated multiple times by pressing the Retitrate button and starting over. Enter the concentration of the unknown acid solution.
Explanation:
Why is volume measured with different units?
Answer:
The volume of an object can be calculated by multiplying its length, width and height. Further, depending on the shape of the object, its volume changes.
Explanation:
Hope this helps
Scientific Notation!!!!!
#9 b) PLEASE HELP!!!
Explanation:
9) a) (9.84×10³)/(6.12×4.27×10³+⁷) = 9.84×10³/6.12×4.27×10¹⁰ = 9.84×10³-¹⁰/6.12×4.27
= 0.376×10^-7.
b) (4.36×10⁸×1.82×10³)/(0.0856×4.7×10⁶)
= (7.9352×10⁸+³)/(0.40232×10⁶)
= 19.72×10⁸+³-⁶ = 19.72×10⁵
hope this helps you.
On vacation, Aria went scuba diving in the Pacific Ocean for the very first time. She rose toward the surface of the water at a steady speed for 4 minutes. She rose 36 meters in that time. What was her speed? HELP ME ASAP!!!!!!!!!!!!!
Aria speed during scuba diving was 0.15 m/s.
Speed is the ratio of the distance travelled to the time taken. Speed is given by:
Speed = distance / time
Given that the distance travelled was 36 meters and the time was 4 minutes, hence:
Time = 4 minutes × 60 seconds per minute = 240 seconds
Speed = 36 m / 240 s
Speed = 0.15 m/s
Therefore Aria speed during scuba diving was 0.15 m/s.
Find out more at: https://brainly.com/question/22610586
4. Why is it that your feet don't sink into the earth?
Answer:
because our feet has more density
Part D
Based on the activity series you created in part C, predict whether there would be a chemical reaction or no
reaction when the listed pairs of substances are combined.
Answer:
magnesium and copper(II) sulfate no reaction
iron and magnesium sulfate reaction
copper and iron(III) nitrate reaction
magnesium and hydrochloric acid reaction
Explanation:
The green light emitted by a stoplight has a wavelength of 505 nm. What is the frequency of this photon? (c = 3.00 × 10⁸ m/s).
Answer:
5.9405*10^14 Hz
Explanation:
Remember the equation c=v*λ
v=frequency
λ=wavelength
By manipulating the equation, we can get it in terms of frequency:
c/λ=v
Now convert wavelength to meters (1nm=m*10^-9)
5.05*10^-7m (2 decimal places were shifted to make the number between 1-10, hence the -7 exponent)
Use the manipulated equation:
(3.00*10^8)/(5.05*10^-7), which yields:
5.9405*10^14 Hz (or s^-1)
The frequency of the photon will be "[tex]5.9405\times 10^{14} \ Hz[/tex]".
According to the question,
Wavelength,
[tex]\lambda = 505 \ nm[/tex]or,
[tex]= 5.05\times 10^{-7} \ m[/tex]
As we know the equation,
→ [tex]c = v\times \lambda[/tex]
or,
→ [tex]v = \frac{c}{\lambda}[/tex]
By putting the values, we get
[tex]= \frac{3.00\times 10^8}{5.05\times 10^{-7}}[/tex]
[tex]= 5.9405\times 10^{14} \ Hz[/tex]
Thus the above answer is right.
Learn more:
https://brainly.com/question/14523087
How many moles are present in a sample of HCI with a mass of with a mass of 3.65g?
Answer:
number of moles = 0.1001 mol
Explanation:
number of moles = mass/molar mass
number of moles = 3.65g / 36.459 g/mol
n = 0.1001 mol
In the following reaction, how many liters of oxygen will react with 270 liters of ethene (C2H4) at STP?
C2H4(g) + 3O2(g) 2CO2(g) + 2H2O(g)
The volume of one mole of gas at STP is 22.4 liters.
List the steps in naming covalent compounds.
1. Name the non-metal furthest to the left on the periodic table by its elemental name.
2. Name the other non-metal by its elemental name and an -ide ending.
3. Use the prefixes mono-, di-, tri-.... to indicate the number of that element in the molecule.
4. If mono is the first prefix, it is understood and not written
Answer:
Rules for naming simple covalent compounds:
1. Name the non-metal furthest to the left on the periodic table by its elemental name.
2. Name the other non-metal by its elemental name and an -ide ending.
3. Use the prefixes mono-, di-, tri-.... to indicate the number of that element in the molecule.
4. If mono is the first prefix, it is understood and not written
Examples:
N2O4 is called dinitrogen monoxideCO2 is called carbon dioxideCO is called carbon monoxideN2O is called dinitrogen monoxide. (It is also called nitrous oxide but that is another naming scheme.)CCl4 is called carbon tetrachlorideHere is a chart of those prefixes:
1 - mono
2 - di
3 - tri
4 - tetra
5 - penta
6 - hexa
7 - hepta
8 - octa
9 - nona
10 - deca
You and your family have just arrived in Water Cycle Land. You are going on a new ride called the Water Cycle. You sit in your seat and the ride begins. All of a sudden something goes wrong. Your body is turning into a water droplet! Think about what you have learned about the water cycle. Now tell a story about what happens to you as you travel through the water cycle. By the way, how do you get your body back to normal?
Answer:Me and my family went out and I fell into water and turnt into a water droplet and my family catches me in they hand and put fire
Explanation:
Increasing the frequency _________________ the wavelength. Group of answer choices decreases increases does not change
Answer:
heightens
Explanation:
Determine the amount of grams present in 3.25x1024 atoms of Lithium.
Element is in group 15. Element Y is in group 17. Both of these elements are
In the compound XY3, there are
shared electron pairs.
Answer:
join id(8606512121) pas(12345)
Identify which of the following equations are balanced and which ones are not balanced
A. CH4 +202 —> CO2 + 2H20
B. 6CO2 + 6H2O—> C6H12O6+602
C. 2Na + H2O —> 2NaOH+ H2
Answer:
A. balancedB. UnblalancedC. UnbalancedExplanation:
Substance whose smell changes in acidic or basic solutions
Answer:
Olfactory indicators
Explanation:
The substance whose odour changes in an acidic of basic medium are called olfactory indicators. In an olfactory indicator , smell varies depending on whether it is mixed with an acidic or basic solution.
calculate the mass in grams of two cubic inches (2.00 in³)" of gold. density of gold =19.3 g cm-.³
Taking into account the definition of density, the mass of two cubic inches (2.00 in³) of gold is 632.54 grams.
But first you must know the definition of density. Density is defined as the property that matter, whether solid, liquid or gas, has to compress into a given space.
In other words, density is a scalar quantity referring to the amount of mass in a given volume of a substance, that is, it shows the relationship between the weight (mass) of a substance and the volume it occupies.
Then, the expression for the calculation of density is the quotient between the mass of a body and the volume it occupies:
[tex]density=\frac{mass}{volume}[/tex]
In this case, you know that:
Density= 19.3 g/cm³ Volume= 2 in³= 32.7741 cm³ (being 1 in³= 16.3871 cm³)Replacing in the definition of density:
[tex]19.3\frac{g}{cm^{3} } =\frac{mass}{32.7741 cm^{3} }[/tex]
Solving:
mass= 19.3 [tex]\frac{g}{cm^{3} }[/tex]× 32.7741 cm³
mass= 632.54 g
In summary, the mass of two cubic inches (2.00 in³) of gold is 632.54 grams.
Learn more about density:
brainly.com/question/952755?referrer=searchResults brainly.com/question/1462554?referrer=searchResults
Explain the process of ionization in at least 1 paragraph.
Brainliest goes to best explanation!
Explanation:
Ionization is the process by which ions are formed by gain or loss of an electron from an atom or molecule. If an atom or molecule gains an electron, it becomes negatively charged (an anion), and if it loses an electron, it becomes positively charged (a cation). Energy may be lost or gained in the formation of an ion.
THIS IS MY LAST WUESTION FOR MY TEST I ONLY HAVE 30 MINS LEFT TO ASNWER HELP.
Tiffany decided to make a salad for her lunch. She combined Lettuce, croutons, bacon,
cucumbers, cheese, ham and salad dressing into her bowl. As she was adding each different
ingredient, she tasted each one to make sure that she like it. When she was done, she ate her
salad. She noticed while she was eating the salad, that it had a different flavor than each of the
original ingredients. What type of change occurred?
Homogenous change
A solution change
A chemical change
A physical change
Please help me with this I’ll give you extra credit it’s due in 10 minutes thank youuu!!! :))
Answer:
Okay ask away. . . You haven't asked anything that we would be able to answer
Which layer is thin, brittle, solid, and composed primarily of silica?
the crust
the mantle
the outer core
the inner core
chemical formula of vinegar + cream of tartar
Sodium, Na, is a metallic element.
Explain, with the aid of a labelled diagram, what is meant by the term metallic bonding.
Answer:
metallic bonding is the bond form between two or more metal elements or between metal element and the other group elements
A student uses a solution of potassium hydroxide to titrate a solution of nitric acid. Which question is the student trying to answer?(1 point)
What is the concentration of nitric acid?
What is the concentration of nitric acid?
How much nitric acid solution is present?
How much nitric acid solution is present?
What is the concentration of potassium hydroxide?
What is the concentration of potassium hydroxide?
How many moles of potassium hydroxide are present?
How many moles of potassium hydroxide are present?
Answer:
A. What is the concentration of nitric acid?
Explanation:
its right
Answer:
A
Explanation:
s
Part B
Refer to the observations of the test tubes from part A. Determine which metal (or hydrogen) in each test tube is
more reactive. Remember that the less reactive metal (or hydrogen) will typically end up in pure form as an
element, so no reaction will occur if the less reactive metal (or hydrogen) is the one that begins in pure form
Answer:
More Reactive:
iron
hydrogen
zinc
magnesium
zinc
iron
Explanation:
The reactivity of metals can be determined based on their ability to displace other metals from their compounds or to displace hydrogen from acids. Generally, metals that are higher in the reactivity series can displace metals lower in the series.
1. **Iron & Copper:** Iron is more reactive than copper. If iron is present in its pure form, it would displace copper from its compound.
2. **Copper & Hydrogen:** Hydrogen is less reactive than copper. No reaction will occur if hydrogen is the element in pure form.
3. **Zinc & Iron:** Zinc is more reactive than iron. If zinc is present in its pure form, it would displace iron from its compound.
4. **Iron & Magnesium:** Magnesium is more reactive than iron. If magnesium is present in its pure form, it would displace iron from its compound.
5. **Zinc & Hydrogen:** Hydrogen is less reactive than zinc. No reaction will occur if hydrogen is the element in pure form.
6. **Iron & Hydrogen:** Hydrogen is less reactive than iron. No reaction will occur if hydrogen is the element in pure form.
Remember, the reactivity series is a ranking of metals based on their tendency to lose electrons and form positive ions. Elements higher in the series can displace elements lower in the series from their compounds in certain reactions.
To know more about reactivity of metal:
https://brainly.com/question/20570629
#SPJ3
Oxalic acid is a diprotic acid with a first dissociation constant Ka1 = 0.0537 and a second dissociation constant Ka2 = 5.42×10-5. Consider all the species in equilibrium with each other in a 0.45 M solution. Note that the first acid dissociation constant is pretty large. This acid is almost a strong acid.
Part 1:
What is the concentration of undissociated oxalic acid in the 0.45 M oxalic acid solution?
Part 2:
What is the concentration of hydrogen oxalate?
Part 3:
What is the concentration of oxalate?
Part 4:
What is the concentration of hydronium?
Part 5:
What is the concentration of hydroxide?
Part 6:
What is the pH of the solution?
Answer:
50 points for this easy question
Please explain this and give answers
Answer:
a) 2Ba + O2 → 2BaO
b) 2HCl + Mg → MgCl2 + H2
c) 2HCl + CuO → CuCl2 + H2O
d) Fe + O2 → Fe2O3
Explanation:
Okay so for
a), you must add 2 at the front of Ba and BaO bcuz you're gonna need your equation balanced.
like as you can see, O has 2 so yeahh, you've got to balance it nicely.
b) you must add 2 in front of HCl bcuz the Cl and H after the reaction happened has 2 in them, were talking about balancing so XD
c) and yes again, you're gonna have to add 2 in front of HCl bcuz of the same reason as b).
d) D is definitely a special case bcuz, Fe3+ with O2, so well if you do the cross multiplication technique you'll automatically get Fe2O3. Yas that's it.
English is not my first language so it's hella tuff to explain it to you from in much more detailed perspective T-T Sorry (´∩｡• ᵕ •｡∩`)
a
A 49.8 mL sample of gas in a cylinder is warmed
from 18°C to 83 °C.
what is it’s volume at the final temperature? (Assume constant pressure)
Using Charles law
[tex]\\ \sf\longmapsto V_1T_2=V_2T_1[/tex]
[tex]\\ \sf\longmapsto V_2=V_1T_2\div T_1[/tex]
[tex]\\ \sf\longmapsto V_2=\dfrac{49.8(356)}{291}[/tex]
[tex]\\ \sf\longmapsto V_2=\dfrac{17728.8}{291}[/tex]
[tex]\\ \sf\longmapsto V_2=60.9mL[/tex]
Explain why the element of an atom doesn't change if you remove or add electrons or neutrons
Answer:
If you could miraculously remove two neutrons from an atom's nucleus, the atomic number and electrical charge would stay unaltered. Because neutrons have no electrical charge, adding or removing them from the nucleus has no effect on the nucleus's electrical charge. It does, however, alter the nucleus's mass. Isotopes are formed by adding or subtracting neutrons from the nucleus.